What Did You Do To Your Avant Today?

[NLPed68]

"Bilstein B12 Low" haha. Really interested to see how the rear fender gap came out with those sportlines. That's a brand new chassis!

I really don't think the front is any lower than the PRO kit, just that the rear MATCHES!, like it should.

[avantagg]

I really don't think the front is any lower than the PRO kit, just that the rear MATCHES!, like it should.

The way it should have been designed! [emoji856]

[mrw]

Got the car torn apart and installed the fenders,lights and bumper cover installed. Need to adjust the panels and bumper cover a little better before I take them off for paint. I want to make sure that all the brackets are adjusted properly so the body parts go on easily when I get them painted. The cold start emission was in the way of the new bumper cover so I have it sitting in loose for now. I will try to find a solution for that tomorrow. I need a fender support bracket for the drivers side which I did not remove from the parts car which is no longer at my house so that will have to wait until next week. I have did not plug the fog lights in yet but the plugs are the same as the plugs on the 2012 front bumper cover that I removed. IF I can get the fitment to where I want it this weekend I will get everything painted next week and put it al back together next weekend if I can find the time. I am getting much better of tearing it all down after doing it twice in the last week. I hope putting it back together will get easier. Stay tuned....

http://i512.photobucket.com/albums/t323/mrwphoto_2008/IMG_3601.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/IMG_3601.jpg.html)http://i512.photobucket.com/albums/t323/mrwphoto_2008/IMG_3599.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/IMG_3599.jpg.html)

[redavant]

Time to rotate tires...

http://uploads.tapatalk-cdn.com/20160910/74f12fcb80cef3d643aae3d3d27e8492.jpg

http://uploads.tapatalk-cdn.com/20160910/547556bc2529fcd64e73b0896850f5f2.jpg

[Samsonite]

Going to try to switch from my OEM S5 Peelers (19x9 ET33 ~30lbs) to the rotary forged, TSW Bathurst (19x9.5 ET39 ~20lbs)...did a test fit this weekend and had to shave some of the front caliper carriers off...now waiting on centering rings...its going to be tight with 235/35/19 at 24.25FTG, but will hopefully work out...pretty stoked...

https://c1.staticflickr.com/9/8486/29620863256_5e7bf7e605_b.jpg (https://flic.kr/p/M8uEEU)

https://c3.staticflickr.com/9/8467/29029924514_9edf611b48_b.jpg (https://flic.kr/p/LegXaU)

https://c5.staticflickr.com/9/8312/29029926684_a918cec3d1_b.jpg (https://flic.kr/p/LegXPj)

[Kevinskir]

It's not what I did, but what some other ziners did this weekend to my car at Pacific waterland, when I wasn't looking

http://uploads.tapatalk-cdn.com/20160913/f84afde065081b6b5d6f4b151580f5e4.jpg

Sent from my SM-G920V using Tapatalk

[tankdeer]

It's not what I did, but what some other ziners did this weekend to my car at Pacific waterland, when I wasn't looking

http://uploads.tapatalk-cdn.com/20160913/f84afde065081b6b5d6f4b151580f5e4.jpg

Sent from my SM-G920V using Tapatalk

Just one ziner really

[Charles.waite]

Hooligans!

[evo_ski]

Just one ziner really
Zinerweiner.


Pat made me do it.

[tankdeer]

Pat made me do it.

That's a lie

[avantagg]

Window trims got wrapped. Went Stage2.

http://uploads.tapatalk-cdn.com/20160915/989b7816583ba5095798921378597197.jpg

http://uploads.tapatalk-cdn.com/20160915/ceb90327c37994aada2c9ae460a19f1f.jpg

[pwdrskr]

Window trims got wrapped. Went Stage2.

http://uploads.tapatalk-cdn.com/20160915/989b7816583ba5095798921378597197.jpg

http://uploads.tapatalk-cdn.com/20160915/ceb90327c37994aada2c9ae460a19f1f.jpg

Did you wrap yourself? How much did it cost you if not? I've been considering this for some time now. Even went so far as to buy the wrap but have been too lazy to give it a shot.

[avantagg]

Did you wrap yourself? How much did it cost you if not? I've been considering this for some time now. Even went so far as to buy the wrap but have been too lazy to give it a shot.

I looked into the shadow line tape and some other vinyl options but decided I'd leave it to the pros. I'm very happy with the results, it's virtually seamless. Mine came out to 300.

http://uploads.tapatalk-cdn.com/20160915/b167124fe807338631566ee0234016a7.jpg

[GramCracker]

I waited in line for 3 hours at the DMV today to finally get the Avant registered. The nice lady at the counter looked up a plate "number" for me and confirmed its availability...Immediately went home and did the following:

http://i.imgur.com/wNthQZZ.jpg

[88ninety9]

^Nice! Never thought about using paint codes......quite clever!

[pwdrskr]

Had the clear bra protectant replaced all over the car including hood, front and rear bumper (painted bits) door edges, handles, a-pillars and leading edge of roof.

Got some minor paints chips repaired and the entire car buffed.

Replaced the rear lift gate window tint that was ripped.

The old protectant was discolored and really stood out on the white paint. Now it's invisible. Almost thought they didn't do it! Car looks amazing.

Accutint NW is Shoreline, WA did the work. Highly recommend them for people in the Seattle area.

http://uploads.tapatalk-cdn.com/20160916/7d1475051dfc4b3fef2b645e3c480360.jpg


Sent from my iPhone using Audizine (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=87676)

[dsgray16]

I sat in my Avant today for the first time in over a year.. Finish line is a few days away!

http://uploads.tapatalk-cdn.com/20160917/1ef77e1af7afb940824b37432cf4a9bc.jpg

[geebus]

Installed my new to me tail lights [emoji106]http://uploads.tapatalk-cdn.com/20160921/3cd2406105560f68f5c7ccc279a01dc3.jpg


Sent from my iPhone using Tapatalk

[eljay]

Installed my new to me tail lights [emoji106]http://uploads.tapatalk-cdn.com/20160921/3cd2406105560f68f5c7ccc279a01dc3.jpg


Sent from my iPhone using Tapatalk
Those look great!

[Samsonite]

Ha! JJ, you got those taillights!? Nice!

I installed my new wheels, here are some crappy pics...

https://c6.staticflickr.com/9/8219/29743845181_5d0b26a6c7_o.jpg (https://flic.kr/p/MjmYUV)

https://c7.staticflickr.com/9/8555/29199249574_07cf40eae1_o.jpg (https://flic.kr/p/LueMBu)

https://c7.staticflickr.com/8/7744/29199249414_7dbb9abbdd_o.jpg (https://flic.kr/p/LueMyJ)

[geebus]

Those look great!
Thanks!

Ha! JJ, you got those taillights!? Nice!

I installed my new wheels, here are some crappy pics...

https://c6.staticflickr.com/9/8219/29743845181_5d0b26a6c7_o.jpg (https://flic.kr/p/MjmYUV)

https://c7.staticflickr.com/9/8555/29199249574_07cf40eae1_o.jpg (https://flic.kr/p/LueMBu)

https://c7.staticflickr.com/8/7744/29199249414_7dbb9abbdd_o.jpg (https://flic.kr/p/LueMyJ)

Lol yeah, I had to make a rash financial decision and jump on these lol. Now I haz no monies [emoji17]


I like the new wheels you got!


Sent from my iPhone using Tapatalk

[Turbavanttro]

This is brilliant! Which option did you choose?


I waited in line for 3 hours at the DMV today to finally get the Avant registered. The nice lady at the counter looked up a plate "number" for me and confirmed its availability...Immediately went home and did the following:

http://i.imgur.com/wNthQZZ.jpg

Yes sir! RS4-swapped, UM-tuned B7 S4 Avant goodness!


I sat in my Avant today for the first time in over a year.. Finish line is a few days away!

http://uploads.tapatalk-cdn.com/20160917/1ef77e1af7afb940824b37432cf4a9bc.jpg

Love the concavity of the new Vorsteiners, they look so mean yet OEM+ fresh on the B7


Ha! JJ, you got those taillights!? Nice!

I installed my new wheels, here are some crappy pics...

https://c7.staticflickr.com/8/7744/29199249414_7dbb9abbdd_o.jpg (https://flic.kr/p/LueMyJ)

[mrw]

Got everything back from the painter for the facelift and spent the day putting it all back together. Just a little bit of coding to do and it will be done.http://i512.photobucket.com/albums/t323/mrwphoto_2008/Mobile%20Uploads/image_2.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/Mobile%20Uploads/image_2.jpg.html)http://i512.photobucket.com/albums/t323/mrwphoto_2008/Mobile%20Uploads/image_3.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/Mobile%20Uploads/image_3.jpg.html)

[1.8t]

Got everything back from the painter for the facelift and spent the day putting it all back together. Just a little bit of coding to do and it will be done.http://i512.photobucket.com/albums/t323/mrwphoto_2008/Mobile%20Uploads/image_2.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/Mobile%20Uploads/image_2.jpg.html)http://i512.photobucket.com/albums/t323/mrwphoto_2008/Mobile%20Uploads/image_3.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/Mobile%20Uploads/image_3.jpg.html)

Nice! What did you swap to make it a .5? Headlights, bumper, fenders?

[antlaurence]

Got everything back from the painter for the facelift and spent the day putting it all back together. Just a little bit of coding to do and it will be done.http://i512.photobucket.com/albums/t323/mrwphoto_2008/Mobile%20Uploads/image_2.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/Mobile%20Uploads/image_2.jpg.html)http://i512.photobucket.com/albums/t323/mrwphoto_2008/Mobile%20Uploads/image_3.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/Mobile%20Uploads/image_3.jpg.html)

that looks sweet. do you have a build thread for the swap?

[dropshadow]

Got everything back from the painter for the facelift and spent the day putting it all back together. Just a little bit of coding to do and it will be done.http://i512.photobucket.com/albums/t323/mrwphoto_2008/Mobile%20Uploads/image_2.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/Mobile%20Uploads/image_2.jpg.html)http://i512.photobucket.com/albums/t323/mrwphoto_2008/Mobile%20Uploads/image_3.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/Mobile%20Uploads/image_3.jpg.html)

You waste no time. Good show, man.

[Chuuey]

I... am FINALLY back in an avant!!!

http://uploads.tapatalk-cdn.com/20160926/823ef2702ffb4a4f3ab929fcd2dadb08.jpg



http://uploads.tapatalk-cdn.com/20160926/7e6f63fc10a5cafcf575cdbd5fe26680.jpg

[mrw]

Nice! What did you swap to make it a .5? Headlights, bumper, fenders?

Fenders, hood, bumper lights and associated brackets, hood hardware and a whole bunch of assorted brackets and small trim pieces.

Antlaurence- sorry no build thread yet. I still have a few bugs to work on (which I have just haven't gotten around to yet) and when I do I will write it up. I am just enjoying driving it.

Dropshadow-I had been thinking about this for a while and when I found a proper donor (and another A'ziner who needed some parts) I (we) bought a salvage car for what we needed. My old front end was peppered with stone chips which I was going to paint anyway so this hardly added much more cost.

[avantagg]

That came out really nice! A rare beast.

[V70R]

Replaced the 2005's 150amp alternator with a b8.5 180amp version...about a 99% direct conversion.

http://i1294.photobucket.com/albums/b610/Cyclingandersen/IMG_1319_zpsh2hd3nzj.jpg

[jaustin]

whats the 1%

[V70R]

the newer 180amp alternators require a different locking mechanism (orange tab, easily removed inside connector) to seat the electrical connector. Quick search of the part no. below and you can see the orange tab inside the connector.

Part number: 4D0971992B

[mdot1203]

Installed crossbars and bike rack. Had to trim the rear cross bar and trim the back of the bike rack so the hatch wouldn't hit when fully open.

https://c2.staticflickr.com/9/8799/30067463145_55b053370c_b.jpg (https://flic.kr/p/MNXBfZ)

https://c8.staticflickr.com/6/5756/30067462735_ab33b2f940_b.jpg (https://flic.kr/p/MNXB8V)

https://c5.staticflickr.com/8/7473/29439780004_fc4b1ff939_b.jpg (https://flic.kr/p/LRuyVS)

https://c3.staticflickr.com/9/8798/29439779514_aec6a55a53_b.jpg (https://flic.kr/p/LRuyMq)

https://c1.staticflickr.com/6/5715/29773433560_623060638f_b.jpg (https://flic.kr/p/MmYCvo)

Crossbars and bike rack: custom fitted. (https://flic.kr/p/MmYCvo) (Before the rear was trimmed)

[NLPed68]

No picture, but got the S4 calipers back from the powder coater (brilliant blue & cleared). Installed them on my B8 A4 with new coated cross drilled & slotted rotors. They look good, but still have a bit of bedding to do on the EBC reds. Pics will come soon.


Sent from my iPhone using Tapatalk

[gcoy]

Installed Carbon Cupra lip

http://i1254.photobucket.com/albums/hh602/gcoy69/IMG_5393.jpg (http://s1254.photobucket.com/user/gcoy69/media/IMG_5393.jpg.html)
http://i1254.photobucket.com/albums/hh602/gcoy69/IMG_5398.jpg (http://s1254.photobucket.com/user/gcoy69/media/IMG_5398.jpg.html)
http://i1254.photobucket.com/albums/hh602/gcoy69/IMG_5400.jpg (http://s1254.photobucket.com/user/gcoy69/media/IMG_5400.jpg.html)

[DirtD1ver]

No pictures from playing in the mud. but here is one from me getting clean. and hanging with other Allroads

http://i451.photobucket.com/albums/qq233/dadams19/h2oi%202016/IMG_4960_zpst0zwvrrb.jpg

http://i451.photobucket.com/albums/qq233/dadams19/h2oi%202016/IMG_5173_zpsfejsvuzq.jpg

[redavant]

Gearing up for a new project... :-)

http://uploads.tapatalk-cdn.com/20161004/99aafb4cbff156a9d4fc97ca2cf11659.jpg

[kdaffy]

^Nice! look forward to seeing the end result! any update on the GB?

[redavant]

^Nice! look forward to seeing the end result! any update on the GB?

Unfortunately, there was not enough interest in Avant or general A4 section. However, if you want something for yourself, I'm happy to help you. Have a god relationship with BK guys. Lmk.

[Nollywood]

http://i768.photobucket.com/albums/xx329/NaijaGuy/Audi%20B6%20420-S/image_zps9wpznnbl.jpeg (http://s768.photobucket.com/user/NaijaGuy/media/Audi%20B6%20420-S/image_zps9wpznnbl.jpeg.html)

http://i768.photobucket.com/albums/xx329/NaijaGuy/Audi%20B6%20420-S/image_zpsaznowcvv.jpeg (http://s768.photobucket.com/user/NaijaGuy/media/Audi%20B6%20420-S/image_zpsaznowcvv.jpeg.html)

[jbain2]

http://i768.photobucket.com/albums/xx329/NaijaGuy/Audi%20B6%20420-S/image_zps9wpznnbl.jpeg (http://s768.photobucket.com/user/NaijaGuy/media/Audi%20B6%20420-S/image_zps9wpznnbl.jpeg.html)

http://i768.photobucket.com/albums/xx329/NaijaGuy/Audi%20B6%20420-S/image_zpsaznowcvv.jpeg (http://s768.photobucket.com/user/NaijaGuy/media/Audi%20B6%20420-S/image_zpsaznowcvv.jpeg.html)

2.7???


Sent from my iPhone using Tapatalk

[WokkerK]

Please be a 2.7 build....

[Nollywood]

2.7???


Sent from my iphone using tapatalk

4.2 v8 40vt. [;)]

[Charles.waite]

Installed crossbars and bike rack. Had to trim the rear cross bar and trim the back of the bike rack so the hatch wouldn't hit when fully open.

https://c2.staticflickr.com/9/8799/30067463145_55b053370c_b.jpg (https://flic.kr/p/MNXBfZ)

https://c8.staticflickr.com/6/5756/30067462735_ab33b2f940_b.jpg (https://flic.kr/p/MNXB8V)

https://c5.staticflickr.com/8/7473/29439780004_fc4b1ff939_b.jpg (https://flic.kr/p/LRuyVS)

https://c3.staticflickr.com/9/8798/29439779514_aec6a55a53_b.jpg (https://flic.kr/p/LRuyMq)

https://c1.staticflickr.com/6/5715/29773433560_623060638f_b.jpg (https://flic.kr/p/MmYCvo)

Crossbars and bike rack: custom fitted. (https://flic.kr/p/MmYCvo) (Before the rear was trimmed)

The shit we do to make those whispbars fit all our roof rack accessories! Haha.

[Axis]

^^I have cross bars and just ordered whispbars, hope I wont regret it..

[jbain2]

^^I have cross bars and just ordered whispbars, hope I wont regret it..
I have them and don't.

Sent from my VK810 4G using Tapatalk

[GramCracker]

Totally didn't do anything to my avant today but I just miss it [:(]

[squeegy200]

Replaced the window regulator on the passenger side along with the cable to the door latch. On the driver's side replaced the power window and window lock module in the driver's door. Thought it was all done for now

But it threw something else at me. Now looking at fixing the rear wiper as it just died while I wrapped up on my current fixes. it knows .....

Sent from my Nexus 7 using Tapatalk

[nhodgson1993]

Totally didn't do anything to my avant today but I just miss it [:(]

lol u need a garage man

[sferraro]

Installed OEM S4 pedals. I read that they were annoying/difficult to install but it honestly took me less than 10 minutes. Guess I got lucky.

https://c5.staticflickr.com/6/5747/30442101236_44ab428d96_c.jpg

[eljay]

Replaced the window regulator on the passenger side along with the cable to the door latch. On the driver's side replaced the power window and window lock module in the driver's door. Thought it was all done for now

But it threw something else at me. Now looking at fixing the rear wiper as it just died while I wrapped up on my current fixes. it knows .....

Sent from my Nexus 7 using Tapatalk
That sucks as removing the hatch trim is a giant pain!

[Charles.waite]

That sucks as removing the hatch trim is a giant pain!

How do? I might be replacing the rear wiper motor on my b7 soon-ish. I've never really seen any DIY.

[Avantmaniac]

Installed AG - M590 wheels,

http://i78.photobucket.com/albums/j100/iKelisiousz/20161022_110356.png (http://s78.photobucket.com/user/iKelisiousz/media/20161022_110356.png.html)

[amd is the best]

Got featured on CarThrottle: https://www.carthrottle.com/post/this-modified-audi-200-avants-launch-is-gloriously-violent/

[eljay]

How do? I might be replacing the rear wiper motor on my b7 soon-ish. I've never really seen any DIY.
Take a look here to get the rear trim off: http://www.audi-sport.net/xf/threads/avant-bootlid-plastics-removal-info-req.105041/

You have to give it a hard yank at the places where the clips are. Don't do gradual pull, but geab it firmly and yank.

[happy2B5]

Threw on the stocker/winter setup. She looks sad.

[kdaffy]

new pedals!

http://i44.photobucket.com/albums/f30/dafoulask/78c9349b-58a8-4fc6-bebd-3511b0c9ddbc_zpsujphmigs.jpg (http://s44.photobucket.com/user/dafoulask/media/78c9349b-58a8-4fc6-bebd-3511b0c9ddbc_zpsujphmigs.jpg.html)

washed and cleaned the car too. next up, winter tires are going on (waiting for wheel repair to be complete)...

[Kirath]

Wash and wax this weekend right before the snow hit! Also put on the Nokian snow shoes, installed new doorsill lights, replaced the battery, and installed new Boch Aero windshield wipers. Was a productive weekend!

[classicrl45]

I need a link for those pedals I think I need an upgrade right now!


Sent from my iPhone using Tapatalk

[kdaffy]

^ they are the s4 pedals...they pop up in the classifieds here and there but likely can be found at ECS, europrice...eBay is also an option

Sent from my Nexus 5X using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[redavant]

Upgrade! Install complete! :-)

http://uploads.tapatalk-cdn.com/20161125/311bb64eaa861ee9183a26d1e6343f01.jpg

[Samsonite]

Very nice redavant 👍

[classicrl45]

Appreciate the info kdafffy!


Sent from my iPhone using Tapatalk

[redavant]

Very nice redavant [emoji106]

Thx! :-)

[papadelogan]

Yesterday I swapped out the BKR7EIX plugs for the BKR8EIX just in time to do a little roadtrip up to Breckenridge for the day. Had dinner in Frisco and a room in Keystone. Snowfall up here has been pathetic and the weather so warm, I'm still running my summer setup!!! Today will hit 60 but I may do the swap today while it is nice out and just drive my truck when I need to run out.

Have not noticed much difference in the way she runs with the BKR8's, but I will pull them in 1,000 miles to see how they look.

[contagous]

Today I met up with a fellow Ex AZ member in the area and we replaced the plugs, coils, filter and installed DV+.

Also updated fog, reverse lights with LEDs along with some puddle lights from his old all road.

Everything is running great with our any issues. He is going to help me with coilovers and sway bars when I do my bushings. Great guy.

Oh also installed my CR-15 brace support.

Good day over all.

[Kirath]

Installed a Pioneer 8200NEX headunit into the 2006 S4 Avant.

[Gocaudi]

Did an auto to manual on minehttp://uploads.tapatalk-cdn.com/20161128/7896eecf6f413b937e583e6e11a05f19.jpg

Sent from my HTC One A9 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[kdaffy]

winter mode engaged!

http://i44.photobucket.com/albums/f30/dafoulask/IMG_20161128_145004_zpsqhqtyyn9.jpg (http://s44.photobucket.com/user/dafoulask/media/IMG_20161128_145004_zpsqhqtyyn9.jpg.html)

stock 17s with michelin x ice 3 225/50 R17 - wheels are dirty as F...didnt get a chance to clean before swapping...whispbars going on soon as well

[CONative]

winter mode engaged!

http://i44.photobucket.com/albums/f30/dafoulask/IMG_20161128_145004_zpsqhqtyyn9.jpg (http://s44.photobucket.com/user/dafoulask/media/IMG_20161128_145004_zpsqhqtyyn9.jpg.html)

stock 17s with michelin x ice 3 225/50 R17 - wheels are dirty as F...didnt get a chance to clean before swapping...whispbars going on soon as well

Did the same with my 17s - great option to reuse the stock wheels


Sent from my iPhone using Audizine mobile app

[kdaffy]

For sure and a smaller wheel is actually better for snow driving

Sent from my Nexus 5X using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[ducati]

That sucks as removing the hatch trim is a giant pain!

First time was hard for me getting the rear plastic gate cover off on the fear of breaking the cover,the front clips was straight forward the last clips at the black was harder.The trick I used was use the trim removal tool.First locate where the clips are locked in,pry the trim tool between the glass and cover and twist the tool to lift the cover while gently pulling the cover when doing so,eventually they come loose.When installing my back up camera 3/4 of the time was spent on the rear gate cover and hiding the cable.

[CONative]

Repaired this sucker...noticed something missing when I was installing the winter setup:

http://uploads.tapatalk-cdn.com/20161205/e8e1153b53c413a6e9b60a100c1e2d91.jpg


Sent from my iPhone using Audizine mobile app

[pwdrskr]

Completed Saturday: Converted back to a stock exhaust from the AWE exhaust I had been running. Allroad is so quiet now! Hardest part of the removal/install was removal of one of the three bolts connecting the downpipe to the exhaust. At least until z realized that the bolt was easily accessible from the other side of the engine bay.

I confirmed while researching this project that the A4 avant and allroad exhausts are different. The mount points are in different locations.

Big thanks to zspec (sadly no longer in the Audi club) for generously offering the use of his lift and essentially doing all the work, not to mention brokering the deal to trade my AWE for a stock exhaust from a 2015 allroad.

[sferraro]

Dropped my B8 off at the dealership to investigate a power steering shudder that happens mostly at super slow speed when reversing into my garage and/or parallel parking. They can't figure out what's causing it but they did tell me I get to be the proud owner of a new water pump.

[Dusty Mauve]

Dropped my B8 off at the dealership to investigate a power steering shudder that happens mostly at super slow speed when reversing into my garage and/or parallel parking. They can't figure out what's causing it but they did tell me I get to be the proud owner of a new water pump.

Let me know if they find out what is causing it.
I have the almost same thing on my B8, and the dealership cant seem to find out what is causing it.

[sferraro]

Let me know if they find out what is causing it.
I have the almost same thing on my B8, and the dealership cant seem to find out what is causing it.

They said the bushings on the power steering hose are intact and do not look torn or damaged, they're not seeing anything loose or damaged and that they would have to make a $900 guess by replacing that line and seeing if the shudder improves. They think the bushings are just not as firm as they were originally, allowing extra movement. They say it shouldn't be a concern but more of an annoyance.

[kdaffy]

i had this low speed issue a while back, and they replaced the power steering hose under a TSB...ill try to find the paperwork if you think that would be helpful. It still happens on occassion, and whenever I've brought it up to an SA, they say they cannot reproduce issue/its normal...so annoying

[avantagg]

Winter mode engaged!

http://uploads.tapatalk-cdn.com/20161222/ac64f4a1d7f61ff45d028e48bc67ad51.jpg

[sferraro]

i had this low speed issue a while back, and they replaced the power steering hose under a TSB...ill try to find the paperwork if you think that would be helpful. It still happens on occassion, and whenever I've brought it up to an SA, they say they cannot reproduce issue/its normal...so annoying

Thanks, Kosta. I learned that they updated the power steering hose in 2011 so I have the new version. Agree it's definitely annoying. I may take it to a different Audi dealer after the new year and see if they have better luck figuring it out.

[Fantasiamon]

Winter mode engaged!

http://uploads.tapatalk-cdn.com/20161222/ac64f4a1d7f61ff45d028e48bc67ad51.jpg

Winter mode looks goooood


Sent from my iPhone using Tapatalk

[ECDT]

Wrapped trim/roof rails in satin black and installed oem v-spokes with conti dws06

http://uploads.tapatalk-cdn.com/20161224/3c362ba8d2524ae24aa10b539ee2f378.jpg
http://uploads.tapatalk-cdn.com/20161224/9d122821214f3c726d58134977f1e3d8.jpg

Crappy iPhone in the rain pic

http://uploads.tapatalk-cdn.com/20161224/a924d493ba3e1375dceb4f378adcf6c5.jpg


Sent from my iPad using Tapatalk

[Fantasiamon]

Wrapped trim/roof rails in satin black and installed oem v-spokes with conti dws06

http://uploads.tapatalk-cdn.com/20161224/3c362ba8d2524ae24aa10b539ee2f378.jpg
http://uploads.tapatalk-cdn.com/20161224/9d122821214f3c726d58134977f1e3d8.jpg

Crappy iPhone in the rain pic

http://uploads.tapatalk-cdn.com/20161224/a924d493ba3e1375dceb4f378adcf6c5.jpg


Sent from my iPad using Tapatalk

Looks great. Which vinyl did you wrap with?


Sent from my iPhone using Tapatalk

[ECDT]

Looks great. Which vinyl did you wrap with?


Sent from my iPhone using Tapatalk

3m 1080 satin black was used but one of the few things I didn't install myself and paid a shop to do. I have had bad experiences with wraps before and didn't feel like ruining material or not getting the finished product I wanted.


Sent from my iPad using Tapatalk

[CONative]

Festivities for the afternoon...http://uploads.tapatalk-cdn.com/20161227/e60b367eb928e0fa78d2263730177f10.jpg


Sent from my iPhone using Audizine mobile app

[Sedan Guy]

Picked these up used off a 2016 Black Optic package S5. Going to clean them this weekend.

Factory 20x9; et29; Contisportcontact 3 265/30/20

http://i.imgur.com/xuknyHH.jpg

http://i.imgur.com/QBlWvfu.jpg

[Killerboots]

Picked these up used off a 2016 Black Optic package S5. Going to clean them this weekend.

Factory 20x9; et29; Contisportcontact 3 265/30/20

Excellent! They're badass for sure. Are you going to run any spacers?

[Killerboots]

Non-functional
http://uploads.tapatalk-cdn.com/20161229/5c71e0d4eec6049c171c0985e2e588ec.jpg

Functional
http://uploads.tapatalk-cdn.com/20161229/979e9e1dbc6c986d1bd2dc243ca77ae1.jpg

[geebus]

Non-functional
http://uploads.tapatalk-cdn.com/20161229/5c71e0d4eec6049c171c0985e2e588ec.jpg

Functional
http://uploads.tapatalk-cdn.com/20161229/979e9e1dbc6c986d1bd2dc243ca77ae1.jpg

My dogs would hate that lol


Sent from my iPhone using Tapatalk

[Killerboots]

My dogs would hate that lol

Haha, the bars can be removed for dog transportation mode. Or remain if you need to separate them. Lol

[sferraro]

Rinsed off winter today. And in Colorado that means MgCl 2.

https://c4.staticflickr.com/1/474/31183985523_15fdd6bd83_z.jpg

[Samsonite]

^mmmmm, delicious.

[europaisch]

Love it.


Rinsed off winter today. And in Colorado that means MgCl 2.

https://c4.staticflickr.com/1/474/31183985523_15fdd6bd83_z.jpg

[sebgreen]

http://uploads.tapatalk-cdn.com/20170108/36d659c49a9598561370442c51bb358a.jpg

Swapped the front grill badge

http://uploads.tapatalk-cdn.com/20170108/611ccff9fc0861fa9f4947848e75cf01.jpg


Sent from my iPhone using Tapatalk

[AUDacIouS4]

http://uploads.tapatalk-cdn.com/20170109/2a1c7efbfd9d6d587d1f21871bc23b4b.jpg
http://uploads.tapatalk-cdn.com/20170109/cbcbf75dd7baccb1c24c99b53619c0ee.jpg
For Christmas my parents bought me Thule Aeroblade Edge crossbars and an Inno Shadow 16 cargo box.

My wife bought me a Giac tune (91 pump and E85 race file) so I can keep up with her stage 1 b8 S4

I just ordered myself a magnaflow cat back off Amazon.... $637.00 shipped!!!!

I ordered a set of Vossen x Work VWS-1
Exactly like the picture above in 20x10 et25. 12 weeks to delivery and counting.

slave of corruption

[Samsonite]

FINALLY going to be giving my white wagon the Recaro treatment she deserves, thanks Aaron!

https://c4.staticflickr.com/1/528/31410345763_0773a70699_b.jpg (https://flic.kr/p/PRCetz)

Got the full set, B7 Avant donor with rear ski pass-thru.

[MagnaFlow]

I just ordered myself a magnaflow cat back off Amazon.... $637.00 shipped!!!!


Thanks for the support! We'd love to know what you think after it's installed.

[Samsonite]

Productive day...

https://c4.staticflickr.com/1/752/32240798355_8033062912_b.jpg (https://flic.kr/p/R81w6H)20170110_133046 (https://flic.kr/p/R81w6H) by Nicholas Swanson (https://www.flickr.com/photos/118658193@N04/), on Flickr

https://c2.staticflickr.com/1/521/32240813225_7a4af4c896_b.jpg (https://flic.kr/p/R81Aw6)20170110_133135 (https://flic.kr/p/R81Aw6) by Nicholas Swanson (https://www.flickr.com/photos/118658193@N04/), on Flickr

https://c8.staticflickr.com/1/484/31430745623_d911de4371_b.jpg (https://flic.kr/p/PTqMDi)20170110_205412 (https://flic.kr/p/PTqMDi) by Nicholas Swanson (https://www.flickr.com/photos/118658193@N04/), on Flickr

No Airbag light! Thanks for all your help today @Axis

[gcoy]

Those look awesome !!!

[happs]

Not technically "today," (last Saturday), but flashed an APR Stage 1 tune :) Vroom vroom!

[Callaghan]

Hi guys, I'm new here. This week I've put a DTM front bumper on my B7 S-line Avant. Couldnt find any S-line front bumpers in South Africa and luckily found
a scraped DTM with the bumper still intact. I'll upload a pic or two once I've figured that out. pAID4 I really like those rims you've got on yours!

[Callaghan]

Btw can anyone tell me how the hell I can get more space on here to upload pics? I've been trying to upload a few but they are too big for the space I have at the moment.
any advise? thanks gents.

[Killerboots]

Btw can anyone tell me how the hell I can get more space on here to upload pics? I've been trying to upload a few but they are too big for the space I have at the moment.
any advise? thanks gents.

Upload to Imgur / Flickr / Photobucket or any of the many free hosting sites and link it.

Or

Tapatalk

[sferraro]

https://c4.staticflickr.com/1/752/32240798355_8033062912_b.jpg (https://flic.kr/p/R81w6H)20170110_133046 (https://flic.kr/p/R81w6H) by Nicholas Swanson (https://www.flickr.com/photos/118658193@N04/), on Flickr

https://c8.staticflickr.com/1/484/31430745623_d911de4371_b.jpg (https://flic.kr/p/PTqMDi)20170110_205412 (https://flic.kr/p/PTqMDi) by Nicholas Swanson (https://www.flickr.com/photos/118658193@N04/), on Flickr

Looks great!

[AUDacIouS4]

I played around with some Plasti dip today and applied yellow film to the fogs. Blacked out inside of grille and finished with satin. Blacked out chrome fog rings. Aluminized entire lip to mimic RS4
https://uploads.tapatalk-cdn.com/20170117/54a95bc2875ed0dc59583a696ab82e81.jpghttps://uploads.tapatalk-cdn.com/20170117/d27542c3c29147cf1fed5c5942500389.jpghttps://uploads.tapatalk-cdn.com/20170117/c6eae76da3790b408f8d2682f1be2969.jpg
slave of corruption

[jaustin]

Would be interesting to see how it looks from 10 feet back

[AUDacIouS4]

Like zis?https://uploads.tapatalk-cdn.com/20170118/d07c15c317176bb45d4b9ccf545ffda5.jpg

slave of corruption

[jaustin]

yea, looks nice what about thirty feet back? maybe from the side?

[AUDacIouS4]

yea, looks nice what about thirty feet back? maybe from the side?
https://uploads.tapatalk-cdn.com/20170119/4eb4acc9df97cd76efa38e0b5bcb88fb.jpg

I'll get right on it

slave of corruption

[happy2B5]

Chased down fuel trim issues, vac leaks, exhaust leaks, etc, etc...[emoji35] https://uploads.tapatalk-cdn.com/20170119/0a741bdcd832ca1616c597111a4c8b97.jpg

[DirtD1ver]

Installed the Load Rails

http://i451.photobucket.com/albums/qq233/dadams19/0128171216_zps7ujboibd.jpg

[B5AvantTurbro]

Swapped shoes and fixed my broken mirrorhttps://uploads.tapatalk-cdn.com/20170129/eda0522b3171a58f1f2d6b2833211ec7.jpghttps://uploads.tapatalk-cdn.com/20170129/d3a69ec2859a0851211c28724a5c62d5.jpghttps://uploads.tapatalk-cdn.com/20170129/6b23605cc807ac9e70d2b7d6c68eac16.jpg

Sent from my SM-G925V using Tapatalk

[Samsonite]

Went snowboarding today with one of my sons and took my first long road trip with the new Recaro's. Pretty nice 👍

https://c1.staticflickr.com/1/643/32601599415_37dabaf77a_b.jpg (https://flic.kr/p/RETHFD)20170129_130737 (https://flic.kr/p/RETHFD) by Nicholas Swanson (https://www.flickr.com/photos/118658193@N04/), on Flickr

[mrw]

Finally got around to putting the RS4 spoiler on.http://i512.photobucket.com/albums/t323/mrwphoto_2008/IMG_4077.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/IMG_4077.jpg.html)http://i512.photobucket.com/albums/t323/mrwphoto_2008/image.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/image.jpg.html)

[Killerboots]

Finally got around to putting the RS4 spoiler on.http://i512.photobucket.com/albums/t323/mrwphoto_2008/IMG_4077.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/IMG_4077.jpg.html)http://i512.photobucket.com/albums/t323/mrwphoto_2008/image.jpg (http://s512.photobucket.com/user/mrwphoto_2008/media/image.jpg.html)

Do I spy a Jeep Brute / Pickup conversion back there?! Also, love the spoiler!

[dropshadow]

Do I spy a Jeep Brute / Pickup conversion back there?!

Right? He's got all the toys.

[mdot1203]

https://uploads.tapatalk-cdn.com/20170130/90354d7eb1c6b2b520dc64b103289556.jpg

Thought I'd share in here too. Really excited about this mod and didn't think I'd find a spare S Line grill this fast. Just need to get the adhesive and pick a weekend[emoji16][emoji1419]


Sent from my iPhone using Tapatalk

[ginger_snaps]

Got my new shift boot and knob finally in.

https://uploads.tapatalk-cdn.com/20170131/2c83c29440f2ccc49127c116099f2d64.jpg
https://uploads.tapatalk-cdn.com/20170131/4cf8457b4c721cd4f126725e25d7ff2c.jpg

[GramCracker]

This past weekend I washed it for the first time since Avantoberfest...[>_>]

http://i.imgur.com/5ADZJRh.jpg

[DC242]

This past weekend I washed it for the first time since Avantoberfest...[>_>]


Loving that green.

Not technically today, and not very exciting, but only real mod I've had time to do since picking her up in October.
http://i.imgur.com/fDkJcbn.jpg

[Charles.waite]

Cactus is such a great color.

[Axis]

Got my new shift boot and knob finally in.



Looks great, I have the same knob and like it alot.

May I asked where did you source the boot? Think of having one made custom.

[ginger_snaps]

Looks great, I have the same knob and like it alot.

May I asked where did you source the boot? Think of having one made custom.

Same company. Black Forest industries made it.


Sent from my iPhone using Tapatalk

[Charles.waite]

Looks great, I have the same knob and like it alot.

May I asked where did you source the boot? Think of having one made custom.

I got a boot on eBay from a company in the UK for like $25. Quality was decent and I was able to get red stitching. It probably wasn't as good as OEM regarding leather quality but it was worlds better than my totally dried out and crusty OEM boot. That thing had seen many a latte spilled on it in the 8 years prior to my ownership.

[DC242]

Anybody have any experience with the DTM edition knob available from ECS (https://www.ecstuning.com/b-genuine-volkswagen-audi-parts/dtm-edition-shift-knob-leather-soul-black-silver-6-speed/8e0863278dhvdu/)? I'm leaning towards that same BFI knob, but the DTM edition does come with a new leather boot w/silver stitching...

[Axis]

Anybody have any experience with the DTM edition knob available from ECS (https://www.ecstuning.com/b-genuine-volkswagen-audi-parts/dtm-edition-shift-knob-leather-soul-black-silver-6-speed/8e0863278dhvdu/)? I'm leaning towards that same BFI knob, but the DTM edition does come with a new leather boot w/silver stitching...

Alcantara on a part used as much as a shifter is a no go imo. I had an Alcantara steering wheel/ebrake handle and ended up selling them.

[Charles.waite]

Yea I'd do air leather over alcantara too. I just feel like alcantara plus sweaty palms would get gross after a while...

Not to mention the fabric tends to wear poorly if it's not high quality.

[tankdeer]

Not to mention the fabric tends to wear poorly if it's not high quality.
I agree with everything except this statement. Alcantara is by definition, high quality. Unless of course it's not Alcantara, in which case all bets are off.

But yes, as much as I love Alcantara, on a shift knob, on a daily. That's a no go

[jjvwg]

ive got the DTM alcantara knob on my b6. have had it in there for over four years, 3 being daily driven as an electrician leaving work with dirty hands. I clean it off with a damp microfiber when i clean the interior and no problems at all, still looks great! only complaint was spending that much on a shift knob, but damn its sexy.

[DC242]

Thanks for the feedback all! I'll definitely post up pictures when I decide what option I go with and get it installed. Might be a bit though, as I'm going to spend money on a Stage I tune first probably, If i can ever get around to checking/replacing the cam follower.

[ginger_snaps]

The reason I always feared getting alcantara stuff. I live in south Florida and between the sweat and heat, it would be destroyed in a short amount of time. I'd say do the perforated leather and shift boot. Looks great, feels great and the peace of mind it will last.


Sent from my iPhone using Tapatalk

[Samsonite]

Logged over 140 fun miles and turned 87k miles on the white wagon driving back and forth from the ski resort this weekend...Wife wasn't feeling well and my sons had their own separate plans sat and sun, so it was just me and my 11yr old snowboarding Saturday and me and my 8yr old Sunday...40°F+ as well, good times!

https://c1.staticflickr.com/1/697/32747018411_cb8aa0b05a_b.jpg (https://flic.kr/p/RTK2FH)20170212_165331 (https://flic.kr/p/RTK2FH) by Nicholas Swanson (https://www.flickr.com/photos/118658193@N04/), on Flickr

[AUDacIouS4]

https://uploads.tapatalk-cdn.com/20170217/357ff8bc2675833ae576754a3e790d02.jpg
https://uploads.tapatalk-cdn.com/20170217/bc0ffaaf8bc0ab8b32e8a83cd272e2a4.jpghttps://uploads.tapatalk-cdn.com/20170217/32e795d2ae59e385e5a059282cb14dc7.jpg

APR FMIC to compliment my 034 HFC, Magnaflow cat back, and GIAC E85 race map. IAT's are down a solid 25 degrees!

slave of corruption

[Killerboots]

APR FMIC to compliment my 034 HFC, Magnaflow cat back, and GIAC E85 race map. IAT's are down a solid 25 degrees!

Please post up your impressions once you've logged some mileage. I told GIAC I was installing this FMIC and got this response recently when I inquired about their Stage 2 roadmap for the B8.5. I still intend to move forward but wasn't sure if I'd be switching over to APR Stage 2 depending on how everything is running.

"You may want to hold off on installing the front mount for when we have a stage 2 file depending on how well it flows and how much additional volume it creates. Sometimes front mounts will cause boost to drop a little bit until we change the file to accommodate the additional volume."

If you have a vagcom, I'm sure they would be interested in seeing your logs.

[Avantmaniac]

I just installed this,

http://www.audizine.com/forum/showthread.php/414601-Eurocode-Tuning-Introducing-our-FMIC-kit-for-the-B8-A4-2-0TSI

[NLPed68]

I just installed this,

http://www.audizine.com/forum/showthread.php/414601-Eurocode-Tuning-Introducing-our-FMIC-kit-for-the-B8-A4-2-0TSI

I have that one too.


Sent from my iPhone using Tapatalk

[Avantmaniac]

I have that one too.


Sent from my iPhone using Tapatalk

Ed, how do you like yours? I'm planning to go stg 3 with REVO.

[NLPed68]

I like it a lot. I put mine in at the same time as the K04, APR tune & a few other goodies so I can't speak for it as an individual install. I know the combo made for one HeLLa upgrade.


Sent from my iPhone using Tapatalk

[mdot1203]

Took some pictures on a weekend getaway.
https://uploads.tapatalk-cdn.com/20170219/1a6786f525a34a3b9c136d86cf4a2e49.jpg
https://uploads.tapatalk-cdn.com/20170219/f5e9562c741624b578648b437a8d3b02.jpg
https://uploads.tapatalk-cdn.com/20170219/412b279793ccca63f4ac1a76ca9fae8c.jpg



Sent from my iPhone using Tapatalk

[Veereihen6]

Put out the feelers to sell her to a new home, unfortunately.
http://www.audizine.com/forum/showthread.php/751611-2004-B6-S4-Avant-6MT-Moro-Blue?p=12217018#post12217018

[happy2B5]

Me too

[ChicagosPhantom]

Me too
Which one and where?
Haven't seen it posted.

[happy2B5]

B5 S4. Local listing only

[imajeanius]

Logged over 140 fun miles and turned 87k miles on the white wagon driving back and forth from the ski resort this weekend...Wife wasn't feeling well and my sons had their own separate plans sat and sun, so it was just me and my 11yr old snowboarding Saturday and me and my 8yr old Sunday...40°F+ as well, good times!

https://c1.staticflickr.com/1/697/32747018411_cb8aa0b05a_b.jpg (https://flic.kr/p/RTK2FH)20170212_165331 (https://flic.kr/p/RTK2FH) by Nicholas Swanson (https://www.flickr.com/photos/118658193@N04/), on Flickr

That's awesome. What side sill/skirt are those and where can I get em?

[Samsonite]

Mine are the discontinued Relak side skirts....they do pop up used from time to time....otherwise there is still another company (CSR) producing them across the pond that people have been sourcing....good luck!

[geebus]

Mine are the discontinued Relak side skirts....they do pop up used from time to time....otherwise there is still another company (CSR) producing them across the pond that people have been sourcing....good luck!

I cracked one of mine on Saturday [emoji31][emoji31][emoji31]


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[tankdeer]

I cracked one of mine on Saturday [emoji31][emoji31][emoji31]


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

That was stupid.

That being said, ours have taken a minor beating over the last couple years. They aren't cracked per se but you can see some spots that the outer layer has either worn thin, sloughed off, or something

[Berlinetta]

Just bought a S4 hood will grille for my avant for 50$. Not sure the difference between the two besides the grille, but the price was a steal. Will post pics soon.

Sent from my HTC6525LVW using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[tankdeer]

Just bought a S4 hood will grille for my avant for 50$. Not sure the difference between the two besides the grille, but the price was a steal. Will post pics soon.

Sent from my HTC6525LVW using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
As far as i know the hood itself is identical

[Samsonite]

I cracked one of mine on Saturday [emoji31][emoji31][emoji31]


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Danggg. How'd you manage that!?

[Samsonite]

Sale pending on our dolphin grey avant...hopefully time for my wife to get "her" car as she says I have three cars in the garage and she has zero lol

[Charles.waite]

Sale pending on our dolphin grey avant...hopefully time for my wife to get "her" car as she says I have three cars in the garage and she has zero lol

Haha. We went through the same deal. She always hated the b7 because I "made" her trade in we old b7 on it. Finally let her pick out a q5 and I sold my b6, now I'm in the b7 and there have been zero complaints about cars in over a year aside from a weird issue with the q5s radio which just needed a software update. The q5 gets crappy gas mileage for a 2.0t but it drives well and isn't totally gutless. When the CPO warranty expires in a year or two I'll probably get it tuned.

It's well worth letting the wife choose her own car though. It's nice not having deal with car complaints.

[ginger_snaps]

They are


Sent from my iPhone using Tapatalk

[geebus]

Danggg. How'd you manage that!?

A jack issue [emoji30]


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[naiku]

Bought it some new luggage ;)

http://scontent-amt2-1.cdninstagram.com/t51.2885-15/s480x480/e35/16788845_1111796728947766_4729701802641981440_n.jp g?ig_cache_key=MTQ1Mzg3MjE3Mzk2NTAwMjkwMQ%3D%3D.2

Looking in from the trunk, that sits flush against the seat back. The sub and port fire down into the void beneath the floor (working on a new floor).

[ginger_snaps]

That's going to look tits


Sent from my iPhone using Tapatalk

[AUDacIouS4]

Bought it some new luggage ;)

http://scontent-amt2-1.cdninstagram.com/t51.2885-15/s480x480/e35/16788845_1111796728947766_4729701802641981440_n.jp g?ig_cache_key=MTQ1Mzg3MjE3Mzk2NTAwMjkwMQ%3D%3D.2

Looking in from the trunk, that sits flush against the seat back. The sub and port fire down into the void beneath the floor (working on a new floor).
That's brilliant! Vintage too! Was that your grandpa's suitcase?

slave of corruption

[ZERO FRAME GRAB]

I need some whispbars in my life, tired of that overhang from the ebay bars I bought.

[gcoy]

I need some whispbars in my life, tired of that overhang from the ebay bars I bought.

I'm with you, want Whispbars too !!!

[naiku]

That's brilliant! Vintage too! Was that your grandpa's suitcase?


Just a suitcase I found cheap enough on Craigslist that I did not mind hacking the back off. Hoping to pick up some supplies for the new floor tomorrow, but also need to figure out how I am now going to mount amplifiers and the DSP.

[Fantasiamon]

I need some whispbars in my life, tired of that overhang from the ebay bars I bought.

My Whisp bars never come off my current Sportwagen. They're silent.

Also, I vinyl wrapped mine.
https://uploads.tapatalk-cdn.com/20170223/be1c110d8f066576705e696233f3713f.jpg


Sent from my iPhone using Tapatalk

[gcoy]

Bought it some new luggage ;)

http://scontent-amt2-1.cdninstagram.com/t51.2885-15/s480x480/e35/16788845_1111796728947766_4729701802641981440_n.jp g?ig_cache_key=MTQ1Mzg3MjE3Mzk2NTAwMjkwMQ%3D%3D.2

Looking in from the trunk, that sits flush against the seat back. The sub and port fire down into the void beneath the floor (working on a new floor).

This is a cool idea

[gcoy]

My Whisp bars never come off my current Sportwagen. They're silent.

Also, I vinyl wrapped mine.
https://uploads.tapatalk-cdn.com/20170223/be1c110d8f066576705e696233f3713f.jpg


Sent from my iPhone using Tapatalk

Approve [up]

[Charles.waite]

My Whisp bars never come off my current Sportwagen. They're silent.

Also, I vinyl wrapped mine.
https://uploads.tapatalk-cdn.com/20170223/be1c110d8f066576705e696233f3713f.jpg


Sent from my iPhone using Tapatalk

Aren't those bars facing the wrong way? And what are those t-slot brackets you've got slotted in there. The black looks good, might want to think about that in the future....

[archrenov8]

The thin edge belongs in the rear, like the wing of a plane.

[Charles.waite]

The thin edge belongs in the rear, like the wing of a plane.

This. The thick side is the leading edge and the thin side is the trailing edge.

[DC242]

Have owned my Avant for about 4 months now and finally got around to replacing the cam follower. Didn't look too bad, but glad to know it's got a fresh one now.

Edit: Can't get picture to post. :(

[Fantasiamon]

Aren't those bars facing the wrong way? And what are those t-slot brackets you've got slotted in there. The black looks good, might want to think about that in the future....

They're facing the right way - just might be tough to see in that pick. Yes, like Arc said, like the wing of a plane.

The brackets are for my Rocky Mount Euro Fork Bike mount. I just leave them in because they're really only visible from up top visually and it's much easier than putting them in each time I want to mount up the bike.





Sent from my iPhone using Tapatalk

[weverb]

Installed Bilstein PSS10 and Stern control arms this weekend. Thanks to Killerboots for the inspiration and heads up on what to look out for. And thanks to Layd Dly for the installer recommendation.

http://i1380.photobucket.com/albums/ah192/weverb1/IMG_11191_zpskzrixm86.jpg (http://s1380.photobucket.com/user/weverb1/media/IMG_11191_zpskzrixm86.jpg.html)

http://i.imgur.com/CYUf27z.jpg

[Killerboots]

Installed Bilstein PSS10 and Stern control arms this weekend. Thanks to Killerboots for the inspiration and heads up on what to look out for. And thanks to Layd Dly for the installer recommendation.

Congrats! Looks good. Wheels are spaced out nicely and sitting flush! What did you set the dampers to?

[weverb]

Congrats! Looks good. Wheels are spaced out nicely and sitting flush! What did you set the dampers to?

Must be the angle since there are no spacers on the wheels. Trying 3 in the front and 4 in the back. With 3 on all four corners seemed close to stock but there felt to be some rocking (ever so slightly) back and forth when you come to a stop.

Also both fenders were notched after the alignment. Thanks again for the heads up on that.

[Axis]

Fixed my front bumper that I ripped reversing in a snow and ice mix trying to jump start my other A4.

Used too many self tapping and epoxy to get a good fitment. It holds and fits well but my ocd is on the hunt for another USP front bumper + valance with grilles. Yeah.

[redavant]

Had my 75k service done today! :-)

[AsifAvant]

AUDIZINE YOU DECIDE

What's Wheels
OZ 18" Silver
Driftz 18" Matte Black

I cannot make up my mind https://uploads.tapatalk-cdn.com/20170309/116663df9da8846d404bf5a4f14f5cc0.jpghttps://uploads.tapatalk-cdn.com/20170309/2f2da25ac96a09e22654c25b57917549.jpghttps://uploads.tapatalk-cdn.com/20170309/b5b3ea77e828d17f65258536b3826faf.jpg


Sent from my iPad using Audizine (http://r.tapatalk.com/byo?rid=87676)

[ginger_snaps]

AUDIZINE YOU DECIDE

What's Wheels
OZ 18" Silver
Driftz 18" Matte Black

I cannot make up my mind https://uploads.tapatalk-cdn.com/20170309/116663df9da8846d404bf5a4f14f5cc0.jpghttps://uploads.tapatalk-cdn.com/20170309/2f2da25ac96a09e22654c25b57917549.jpghttps://uploads.tapatalk-cdn.com/20170309/b5b3ea77e828d17f65258536b3826faf.jpg


Sent from my iPad using Audizine (http://r.tapatalk.com/byo?rid=87676)

If only those two, OZ. Then a spacer and lower.


This helpful information provided by GngrSnaps

[tigger_78]

My Whisp bars never come off my current Sportwagen. They're silent.

Also, I vinyl wrapped mine.
https://uploads.tapatalk-cdn.com/20170223/be1c110d8f066576705e696233f3713f.jpg


Sent from my iPhone using Tapatalk
Looks great! I wanted mine black too so had them powdercoated awhile back. Also plastidipped the covers to hide the whispbar logo.

https://uploads.tapatalk-cdn.com/20170309/c1be2c9f72c422b454214bb3e949187b.jpg

[CONative]

Took her to Berg Performance in Denver and had a chance to meet the owner, Aaron. Lifetime customer.


Sent from my iPhone using Audizine mobile app

[AUDacIouS4]

https://uploads.tapatalk-cdn.com/20170315/ce99e72c3cc72f0e44b5d8efebee9443.jpg
Gave my dash bezel a dose of piano black lacquer.

a slave of corruption no longer

[Charles.waite]

They're facing the right way - just might be tough to see in that pick. Yes, like Arc said, like the wing of a plane.

The brackets are for my Rocky Mount Euro Fork Bike mount. I just leave them in because they're really only visible from up top visually and it's much easier than putting them in each time I want to mount up the bike.





Sent from my iPhone using Tapatalk

I think I just had the orientation of your car confused. I thought the picture is looking towards the rear hatch. But on further inspection it's looking towards the front.

Carry on.

[Samsonite]

Gave my dash bezel a dose of piano black lacquer.

I need to do this in my Q7..did you do it yourself?

[AUDacIouS4]

I need to do this in my Q7..did you do it yourself?
Yes, I've done quite a bit of painting things like this so it wasn't too difficult. I can do a write up if anyone is interested.

a slave of corruption no longer

[jamesinger]

I had the poor quality Audi dealer tint removed from my car today and replaced it with F1 Pinnacle 50 all around.
https://c1.staticflickr.com/4/3840/33355190811_91ed2435ea_k.jpg
seems pretty chill

[Quattro 4 Life]

Yes, I've done quite a bit of painting things like this so it wasn't too difficult. I can do a write up if anyone is interested.

a slave of corruption no longer

I'd be interested, I have a couple pieces that I need to redo.

[DeeBee87]

https://uploads.tapatalk-cdn.com/20170318/efe3e386f2f150323a40d985c0b7a75f.jpg


Sent from my iPhone using Tapatalk

[re99ie]

Installed KW HAS followed by a wash.

http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5578_zpsdiwfxxhg.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5578_zpsdiwfxxhg.jpg.html)
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5579_zpsooh3912z.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5579_zpsooh3912z.jpg.html)
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5580_zpshg04royd.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5580_zpshg04royd.jpg.html)
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5582_zpsotxra0ka.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5582_zpsotxra0ka.jpg.html)

[rs5_tdi]

Installed KW HAS followed by a wash.

http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5578_zpsdiwfxxhg.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5578_zpsdiwfxxhg.jpg.html)
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5579_zpsooh3912z.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5579_zpsooh3912z.jpg.html)
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5580_zpshg04royd.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5580_zpshg04royd.jpg.html)
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5582_zpsotxra0ka.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5582_zpsotxra0ka.jpg.html)

Are those oem rs5 rotors ? 20x9

[re99ie]

Are those oem rs5 rotors ? 20x9
They are oem S5 rotors 19x9 +33.

[avantagg]

They are oem S5 rotors 19x9 +33.

Those look nice. How low are you? Any rubbing?

[ians]

Installed KW HAS followed by a wash.

http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5578_zpsdiwfxxhg.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5578_zpsdiwfxxhg.jpg.html)
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5579_zpsooh3912z.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5579_zpsooh3912z.jpg.html)
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5580_zpshg04royd.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5580_zpshg04royd.jpg.html)
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5582_zpsotxra0ka.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5582_zpsotxra0ka.jpg.html)
That's really nice! I am going to put OEM S5 wheels on too and then lower with pss10. Hope it won't rub

Here is my test fit, but can't tell if it will rub or not until lowered and running on the street
35963

Sent from my SM-G935W8 using Tapatalk

[tigger_78]

Installed ECS snub mount...bit of a PITA for the 3.2. Discovered the OE foam mount was cracked in a few spots, so glad I got this done.

Then gave her a much needed wash, full claybar, light scratch buff, and wax. First time doing a claybar and wow, what a difference it makes! Probably the cleanest she's ever been since new ☺️.

https://uploads.tapatalk-cdn.com/20170320/f52b8be16bd77881ad0e0a4a21fbea49.jpg

[re99ie]

Those look nice. How low are you? Any rubbing?
Thanks. For now it's 25.5 inches fender to ground all around. Stock sport suspension was around 26.75 inches fender to ground. Fronts rub during aggressive turns, rears rub on big dips or harsh roads over 30mph. Camber is just under 2 degrees all 4 corners. I'll probably raise it 1/2 inch next week when I have some time at work.


That's really nice! I am going to put OEM S5 wheels on too and then lower with pss10. Hope it won't rub

Here is my test fit, but can't tell if it will rub or not until lowered and running on the street
35963

Sent from my SM-G935W8 using Tapatalk
Thanks. You'll like the fitment! Are you on currently on standard suspension? With oem sport suspension at 26.75 inches fender to ground I had no rubbing issues at all. S5 spec rotors make a huge difference in looks and fitment vs the my stock 19x8.5 rotors. Not sure how low you plan on going but see my response to avantagg.
This was stock oem sport suspension.
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5576_zpsi8cn3xsy.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5576_zpsi8cn3xsy.jpg.html)

[Samsonite]

http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5578_zpsdiwfxxhg.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5578_zpsdiwfxxhg.jpg.html)


I can't believe you rub at all, you're not even low [:p]

Does look good tho [up]

[ians]

Thanks. For now it's 25.5 inches fender to ground all around. Stock sport suspension was around 26.75 inches fender to ground. Fronts rub during aggressive turns, rears rub on big dips or harsh roads over 30mph. Camber is just under 2 degrees all 4 corners. I'll probably raise it 1/2 inch next week when I have some time at work.


Thanks. You'll like the fitment! Are you on currently on standard suspension? With oem sport suspension at 26.75 inches fender to ground I had no rubbing issues at all. S5 spec rotors make a huge difference in looks and fitment vs the my stock 19x8.5 rotors. Not sure how low you plan on going but see my response to avantagg.
This was stock oem sport suspension.
http://i44.photobucket.com/albums/f47/awwwwdeeeez/IMG_5576_zpsi8cn3xsy.jpg (http://s44.photobucket.com/user/awwwwdeeeez/media/IMG_5576_zpsi8cn3xsy.jpg.html)

Yes, I am in stardard suspension now. Just bought it on Dec 31, 2016 [:p] So start working on it bit by bit. With the 17" winter wheels, it sits 27.5" now. I plan to drop to 26". My S5 is 25.5" too and with 20X10.5 ET25 275/30/20 it slightly rub which I dun want that happen on my daily. BTW, have you try remove the screw inside the front wheel well that to secure the liner and the fender? After I remove it on my S5, the front didn't rub as much as before

[pwdrskr]

Added under seat storage to the drivers side. Would have added the passenger side except I managed to lose one of the speednuts while installing the drivers side bin. The speednut shot through the hole and got lodged behind the outer metal under the seat out of sight while attempting to push it in to place. Doh!!!

Ordered a few replacements and will install passenger side eventually.

Purchased bins from ECS (https://www.ecstuning.com/b-genuine-european-volkswagen-audi-parts/front-underseat-storage-bin-kit-pair-sabre-black/8k0898001/)

Followed the instructions on Audi Enthusiasts website (http://www.audienthusiasts.com/ProjectUnderseatbin.html)

Straightforward install and great write up on the instructions.

[plastic_organic]

First time mounting carrier bars after the roof rail swap.https://uploads.tapatalk-cdn.com/20170323/8618f291fc4413af4d8b7e6da333931a.jpg


Sent from my iPhone using Tapatalk

[AUDacIouS4]

First time mounting carrier bars after the roof rail swap.https://uploads.tapatalk-cdn.com/20170323/8618f291fc4413af4d8b7e6da333931a.jpg


Sent from my iPhone using Tapatalk
Roof rail swap....PITA? cost?

RS5 brakes too? Are you going to track that thing?

a slave of corruption no longer

[Killerboots]

First time mounting carrier bars after the roof rail swap.https://uploads.tapatalk-cdn.com/20170323/8618f291fc4413af4d8b7e6da333931a.jpg

Classy upgrades! I keep going back and forth on the flush rails. The utility of the raised rails keeps me from switching but I love the look of the flush ones.

[Charles.waite]

Is there a before pic? Aren't those just the standard b8 rails?

[Killerboots]

Is there a before pic? Aren't those just the standard b8 rails?

Yes, on an allroad which comes with raised rail bars.

[dropshadow]

Is there a before pic? Aren't those just the standard b8 rails?


Yes, on an allroad which comes with raised rail bars.

B8 flush rails:
http://i.imgur.com/8G7kyLQ.jpg

B8.5 allroad raised rails:
http://i.imgur.com/wXWtDmk.jpg

[Charles.waite]

Ahhhh. Sorry didn't realize that was an AR. My b8 game is weak!

[plastic_organic]

Roof rail swap....PITA? cost?

RS5 brakes too? Are you going to track that thing?

a slave of corruption no longer

Roof rail swap is pretty straight forward. It's time consuming, all the pillars have to come out before you can drop the headliner. It took me a full day with the biggest PITA being the C-pillar seeming to take up half the time of removal and install. I attribute that to probably not having all the appropriate trim removal tools. Key word is patience.
As far as tracking it goes, I want to put some more work into the brakes first. Not thrilled with the pedal feel. Definitely brakes sooner but the stock master cylinder and brake booster don't really give me the confidence I'm looking for with these 8 pot calipers. Found a master cylinder/brake booster setup from a D4 S8 (same as RS5) that I'm hoping I install within the next month.
Also not sure if the 20" RS Rotors are appropriate for track use. Might need wider tires.


Sent from my iPhone using Tapatalk

[plastic_organic]

Classy upgrades! I keep going back and forth on the flush rails. The utility of the raised rails keeps me from switching but I love the look of the flush ones.

Thanks! I imagine it's going to be a sacrifice in utility but that's what the carrier bars are for. For me it just came down to preference and being delusional enough to think that all the work required was worth it.
I really like the way it looks and feel that it falls more in place with the rest of the product line.


Sent from my iPhone using Tapatalk

[cmh2011b8avant]

Replaced with mesh grill, painted bumper support & added mesh grill. Grill was a cheap eBay lookalike--some tabs broke and got it for free so not complaining! Bought a new black Thule Flow too!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[AsifAvant]

My B6 S4 Calipers are stripped and ready for Powder coating. Full rebuild with new pistons and new seals.
Thanks to my nephew in London for The rebuild kit https://uploads.tapatalk-cdn.com/20170324/3550092ab59e2fc241e9bbc43cc5c01b.jpg


Sent from my iPad using Audizine (http://r.tapatalk.com/byo?rid=87676)

[dropshadow]

RS4 spoiler installed finally.

http://i.imgur.com/rDPZjX0.jpg

[Avant_to_rock]

^Killer touch!

[DirtD1ver]

no pics, but got my windshield replaced.

[pwdrskr]

recoded the allroad for ADS with Dynamic set as default

[Killerboots]

Installed the APR intercooler this weekend

https://uploads.tapatalk-cdn.com/20170327/b2dd88ddd850321c3003c84dfa4e57cb.jpg

[AUDacIouS4]

Installed the APR intercooler this weekend

https://uploads.tapatalk-cdn.com/20170327/b2dd88ddd850321c3003c84dfa4e57cb.jpg
What do you think so far? I thought the install went smooth on mine and those brackets are well engineered. My car got way faster too, especially at the top end.

a slave of corruption no longer

[Killerboots]

What do you think so far? I thought the install went smooth on mine and those brackets are well engineered. My car got way faster too, especially at the top end.

I'm loving it so far. It pulls hard as hell! I updated the hoses, TMD and high flow intercooler pipe too so there's no bottlenecks. I double checked all my hoses when I got home tonight to make sure everything was secure (an hour in the car) and popped the shroud. The intercooler was cold as ice! Awesome.

[AUDacIouS4]

I'm loving it so far. It pulls hard as hell! I updated the hoses, TMD and high flow intercooler pipe too so there's no bottlenecks. I double checked all my hoses when I got home tonight to make sure everything was secure (an hour in the car) and popped the shroud. The intercooler was cold as ice! Awesome.
I've noticed my IAT'S hover around 18-20* above ambient too. With the stocker I was about 35-40* above ambient. Car runs a few degrees more timing, especially when I'm running E85.

What intercooler piping did you get? I was eyeing that ECS hard pipe kit.

a slave of corruption no longer

[Killerboots]

I've noticed my IAT'S hover around 18-20* above ambient too. With the stocker I was about 35-40* above ambient. Car runs a few degrees more timing, especially when I'm running E85.

What intercooler piping did you get? I was eyeing that ECS hard pipe kit.

I have the Eurocode silicone hose kit. I'm curious to see some reviews on that ECS hard piping setup.

[grumpycarguy]

Traded my 2012 sedan with no options for a 2012 Premium + sports package S-Line Avant and i don't regret it one second!!!! Feels like a totally different car even though I went from manual to auto, but I have ADS and paddle shift [emoji851]
https://uploads.tapatalk-cdn.com/20170328/2435cd766506e90714977ebd9c41640e.jpg
https://uploads.tapatalk-cdn.com/20170328/32871eaceb8d257ac062ba025ce17152.jpg


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Ninja]

nice trade!! not trying to be offensive but your sedan looks like plain jane compare to the avant haha.

[callaghan.]

This was last weekend but...

AST 5100 Series coilovers
New UCA's
4 wheel alignment
Hit 100K miles!

SUPER impressed with these coilovers! The ride quality is incredible.

https://s28.postimg.org/3na0ghpq5/IMG_0327.jpg (https://postimg.org/image/xf72vocjd/)

https://s28.postimg.org/4e2qm9s3h/IMG_0332.jpg (https://postimg.org/image/wqy8cqdtl/)

https://s28.postimg.org/dadiq7ipp/IMG_0596.jpg (https://postimg.org/image/y79quvgqh/)

[grumpycarguy]

nice trade!! not trying to be offensive but your sedan looks like plain jane compare to the avant haha.

None taken. It was a base model but with led lights I don't miss it one second lol at one point I had black peelers but even then it wasn't as awesome as an Avant !!!


Sent from my iPhone using Tapatalk

[CONative]

Today's CL find...a Thule Atlantis 1600https://uploads.tapatalk-cdn.com/20170403/815eb05c1801d1f5a8f3262f63013478.jpg


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[happy2B5]

How much? Looks like my force

Sent from my SM-N920V using Tapatalk

[happy2B5]

Traded my sedan for an Avant and i don't regret it one second!!!!

Duh



Sent from my SM-N920V using Tapatalk

[CONative]

How much? Looks like my force

Sent from my SM-N920V using Tapatalk

$300 - included both keys.

Was trying to hold out for something more narrow but after seeing it on top and how much s* it can hold, I gave in


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[happy2B5]

Nice find. Thats why I got the force alpine. Narrow and carries what I need with room to load bike trays.

[tigger_78]

Installed Q5 style rear wiper. Took a chance on a cheap ($10 USD including shipping!) aftermarket one from eBay and am pleasantly surprised buy the OE-like fit & finish. Will see how the actual blade holds up over time, worst case scenario I buy the OE replacement blade later.

Wipes much better than stock, no more streaking and super quiet. The original arm did not want to come off no matter what I tried (wd40 + heat gun + pulling and twisting and swearing). So I gave up and just used a dremel to cut it off. https://uploads.tapatalk-cdn.com/20170411/88b999b8459f054eb093129b65805558.jpghttps://uploads.tapatalk-cdn.com/20170411/f49cdc5e921a0d928919a5fd22f50f8a.jpg

[Jez]

Cleaned, colour coded the bumpers, fitted HID lights, fitted new wiper motor, fitted sub and amp

http://i153.photobucket.com/albums/s208/jezfederal/Mobile%20Uploads/Fotor_149167533405156_zpsblgko4ai.jpg (http://s153.photobucket.com/user/jezfederal/media/Mobile%20Uploads/Fotor_149167533405156_zpsblgko4ai.jpg.html)

http://i153.photobucket.com/albums/s208/jezfederal/Mobile%20Uploads/Fotor_149167531740866_zpspfxyusl6.jpg (http://s153.photobucket.com/user/jezfederal/media/Mobile%20Uploads/Fotor_149167531740866_zpspfxyusl6.jpg.html)

http://i153.photobucket.com/albums/s208/jezfederal/Mobile%20Uploads/Fotor_149167516302886_zpshdwkg4jf.jpg (http://s153.photobucket.com/user/jezfederal/media/Mobile%20Uploads/Fotor_149167516302886_zpshdwkg4jf.jpg.html)

http://i153.photobucket.com/albums/s208/jezfederal/Mobile%20Uploads/Fotor_149167521707026_zpsjzirqs5c.jpg (http://s153.photobucket.com/user/jezfederal/media/Mobile%20Uploads/Fotor_149167521707026_zpsjzirqs5c.jpg.html)

[GramCracker]

Finally drove it for the first time in about 2 months. Battery was dead despite being on a tender...turns out I left an interior light on [>_>]. Took it to the UConn car show and then washed/waxed it Sunday afternoon. Driving it was so therapeutic I opted to DD the car Monday and Tuesday.

https://i.imgur.com/0oGft3J.jpg

[huynh]

Installed Q5 style rear wiper. Took a chance on a cheap ($10 USD including shipping!) aftermarket one from eBay and am pleasantly surprised buy the OE-like fit & finish. Will see how the actual blade holds up over time, worst case scenario I buy the OE replacement blade later.

Wipes much better than stock, no more streaking and super quiet. The original arm did not want to come off no matter what I tried (wd40 + heat gun + pulling and twisting and swearing). So I gave up and just used a dremel to cut it off. https://uploads.tapatalk-cdn.com/20170411/88b999b8459f054eb093129b65805558.jpghttps://uploads.tapatalk-cdn.com/20170411/f49cdc5e921a0d928919a5fd22f50f8a.jpg

Before I got my avant I found a bunch or research about the Q5 mod and thought it couldn't be that bad. Now that I have mine I realize how bad it really is. I should do this or just delete the arm all together for a clean look.

[tigger_78]

Finally drove it for the first time in about 2 months. Battery was dead despite being on a tender...turns out I left an interior light on [>_>]. Took it to the UConn car show and then washed/waxed it Sunday afternoon. Driving it was so therapeutic I opted to DD the car Monday and Tuesday.

https://i.imgur.com/0oGft3J.jpg
Love that deep green! Beautiful car - the lines are so clean compared to a lot of designs these days.

Sent from my XT1575 using Tapatalk

[tigger_78]

Before I got my avant I found a bunch or research about the Q5 mod and thought it couldn't be that bad. Now that I have mine I realize how bad it really is. I should do this or just delete the arm all together for a clean look.
It's a cheap mod, do it! PM me and I'll send you the ebay link. I thought about just deleting it as well but we get too much rain in Vancouver.

Sent from my XT1575 using Tapatalk

[dropshadow]

Finally drove it for the first time in about 2 months. Battery was dead despite being on a tender...turns out I left an interior light on [>_>]. Took it to the UConn car show and then washed/waxed it Sunday afternoon. Driving it was so therapeutic I opted to DD the car Monday and Tuesday.

https://i.imgur.com/0oGft3J.jpg

Attaboy.

[nhodgson1993]

Finally drove it for the first time in about 2 months. Battery was dead despite being on a tender...turns out I left an interior light on [>_>]. Took it to the UConn car show and then washed/waxed it Sunday afternoon. Driving it was so therapeutic I opted to DD the car Monday and Tuesday.

https://i.imgur.com/0oGft3J.jpg

She wanted the cactus

[oVeRdOsE]

Installed Q5 style rear wiper. Took a chance on a cheap ($10 USD including shipping!) aftermarket one from eBay and am pleasantly surprised buy the OE-like fit & finish. Will see how the actual blade holds up over time, worst case scenario I buy the OE replacement blade later.

Wipes much better than stock, no more streaking and super quiet. The original arm did not want to come off no matter what I tried (wd40 + heat gun + pulling and twisting and swearing). So I gave up and just used a dremel to cut it off.

I got the OEM Q5 one 82$. (cap, arm and bosch wiper)
And it wasn't realy better when the car is dirty dry in winter, even with a lot of windshield washer, it leaves traces.
But when it rains, it's just fine.

I assume, the arm doesn't put enough pressure on the wiper blade.

[asg1290]

Fixed my busted plastic triangle latch with a metal one

https://i.imgur.com/8DwovWv.jpg

https://i.imgur.com/T12Kb2g.jpg

https://i.imgur.com/f3HR4eL.jpg

[callaghan.]

Finally time to put my wheels back on!

https://s30.postimg.org/ip0ngmghd/Full_Size_Render.jpg (https://postimg.org/image/4vcarknvx/)

https://s30.postimg.org/p3zodan75/IMG_0952.jpg (https://postimg.org/image/m9wizul0t/)

https://s30.postimg.org/606cwyacx/IMG_0956.jpg (https://postimg.org/image/xaro4vd9p/)

https://s30.postimg.org/6ecaaaju9/IMG_0957.jpg (https://postimg.org/image/61kw441kd/)

[ZERO FRAME GRAB]

Me being the dummy I am, bought one and didnt put it on right away and lost it

[AvantNoir]

Fixed my busted plastic triangle latch with a metal one

https://i.imgur.com/8DwovWv.jpg

https://i.imgur.com/T12Kb2g.jpg

https://i.imgur.com/f3HR4eL.jpg

Where did you get a metal one from? I need one too. TIA.

[Dusty Mauve]

http://imagizer.imageshack.us/v2/1600x1200q90/922/xsiabT.jpg

Technically not today, but it got a new exhaust yesterday :)

[f_399]

Damn, are those CH's?

[Dusty Mauve]

Yep, they are. BMW spec CH which has been redrilled :)

[f_399]

Second one I have seen, how exactly are they redrilled? I have seen them done on wheels like BBS RS's with a center cap to cover the bolts.

5x120 right? so the lug holes have to get closer to the center?

CH > CH-R but CH-R's are the only one worth getting for the allroad in 5x112

[Dusty Mauve]

Second one I have seen, how exactly are they redrilled? I have seen them done on wheels like BBS RS's with a center cap to cover the bolts.

5x120 right? so the lug holes have to get closer to the center?

CH > CH-R but CH-R's are the only one worth getting for the allroad in 5x112

Old holes are filled then CNC drilled new holes. 5x112 and 5x120 are close enough to not be super visible.
If you look closely IRL you could see that the holes are a tiny bit more rounded off towards the center of the wheel.

CH in 19" at 5x112 doesnt cut it on an allroad width- and offset-wise.
Meanwhile, 5x120 gets the good stuff [>_<]

[f_399]

Awesome! Love concave CH's

Do you have pictures of the new holes after the redrill?

[Charles.waite]

http://imagizer.imageshack.us/v2/1600x1200q90/922/xsiabT.jpg

Technically not today, but it got a new exhaust yesterday :)

Those CHs look amaze balls. What are the width on those?

[f_399]

19x10 et20?

almost the same outer clearance as the 20x10.5 et 25 CH-R's

[Dusty Mauve]

Those CHs look amaze balls. What are the width on those?


Awesome! Love concave CH's

Do you have pictures of the new holes after the redrill?


19x10 et20?

almost the same outer clearance as the 20x10.5 et 25 CH-R's

Dont have any close ups of the redrilling, but I can always take some tomorrow.
10jx19" ET20 on all four. Suited with 255/30-19 Michelin Pilot Super sports.

[Charles.waite]

Balls. No way those would come close to fitting on my b7. Those are MEATY!

[Dusty Mauve]

Balls. No way those would come close to fitting on my b7. Those are MEATY!

10x19" et20 is doable on the B7 I think...but require some tweaking I guess.
Hell, I even managed to do 10x18" et25 all round on a small body B5...B7 must be doable then [emoji23]


Sent from my iPhone using Tapatalk

[Charles.waite]

I should correct that. It might be doable but I'm not interested in doing the modifications required to do it, haha. No rolling fenders and tweaking camber simply to get massive wheels to fit. Regardless of scene points and how amazing those CHs look. 10" wheels are a VERY tight fit on the b7 chassis though.

[oatzel]

Finally got around to hardwiring/installing my V1

Edit: and ordered a magnaflow exhaust

[Teslatim]

https://uploads.tapatalk-cdn.com/20170416/ea676d320d8d033e78ad2e6edb874eaa.jpg

20x10.5s all day :)


Sent from my iPhone using Tapatalk