What Did You Do To Your Avant Today? [Archive] - Page 3

migsan

05-28-2011, 03:40 PM

Change my roof bars and truck trim to black matte... so nice!

http://msgtc.no.sapo.pt/audi/projecto/silver511.JPG

http://msgtc.no.sapo.pt/audi/projecto/silver512.JPG

Meanwhile I start a new mod... change my interior to the S-Line Black Version... :)

http://msgtc.no.sapo.pt/audi/projecto/silver513.JPG

http://msgtc.no.sapo.pt/audi/projecto/silver514.JPG

I have almost finished it (95% done)... :) Pictures soon....

A4 Effort

05-28-2011, 06:32 PM

Ok put on A4Efforts Ti wheels and got me some Hankook EVO12 rubbers. Lookin better. Next suspension to get out of this 4x4 mode.
These hide the dirt well, I'm diggin it big time. For some reason it's hard to photograph Quartz, it looks so much better in person to me.
http://i772.photobucket.com/albums/yy7/swever99/avantti.jpg

Yea! Looks great

I washed mine, again. Re-seated my front wheels and spacers, too. I have just a 'lil bit' of shimmy right at 60 mph, but it's much better than it was before.

kneel

05-28-2011, 07:48 PM

took this pic on the way home from work this morning

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/255182_10150185616865178_539685177_7300625_1680973 _n.jpg

PNW Avant

05-28-2011, 09:53 PM

Detailed the inside and washed the outside. Debadged the rear.

After I was all done I started practicing with a few different pad/polish combinations, prepping for when I do my full detail.

I'll try to post a pic or two tomorrow.

B5S4/C5A6

05-29-2011, 12:22 AM

washed mine...
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/247187_133310930079211_131514840258820_235857_1160 112_n.jpg

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/250975_133311020079202_131514840258820_235858_7919 270_n.jpg

smooth as butter again...
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/250332_133306763412961_131514840258820_235838_2293 256_n.jpg

pooptech 332's going on this week and then just waiting for the Vogtland GT rears to be shipped out from being rebuilt.

A4 Effort

05-29-2011, 06:18 AM

washed mine...

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/247187_133310930079211_131514840258820_235857_1160 112_n.jpg

What foam gun are you using?

B5S4/C5A6

05-29-2011, 06:20 AM

the $17 Home Depot one.

BCsniper

05-29-2011, 10:35 AM

Oh yeh,she's an a4 v6 3.0 6speed

Looks like we're twins (albeit with different wheels).
I'm an Atlas Grey 3.0 6MT as well

http://i.imgur.com/yFg3y.jpg
http://i.imgur.com/MNRhu.jpg

and here's my contribution to what I did to my Avant today:
http://i.imgur.com/tz2RU.jpg
Plasti-Dipped the front grill surrounds. Going to do the rear rings as well, just need to go get some more 3M double-sided tape first so I'll be able to put them back on

nudavinci64

05-29-2011, 11:53 AM

i need to get that home depot gun.. I have been re-purposing the mr. clean with meguiars Gold Class in it.

dufferdude

05-29-2011, 01:30 PM

Same idea for me, I use a old liquid fertilizer sprayer set on the highest setting to dispense Meguiars. works ok. makes good foam.

7speed

05-30-2011, 09:05 AM

Still getting the car ready

http://i447.photobucket.com/albums/qq194/audizine/th_MVI_8841.jpg (http://s447.photobucket.com/albums/qq194/audizine/?action=view&current=MVI_8841.mp4)

old engine out new built goodness in !

http://i447.photobucket.com/albums/qq194/audizine/Avant%20Build/IMG_8847.jpg

http://i447.photobucket.com/albums/qq194/audizine/Avant%20Build/IMG_8861.jpg

http://i447.photobucket.com/albums/qq194/audizine/Avant%20Build/IMG_8863.jpg

kneel

05-30-2011, 09:58 AM

^AWESOME!

Gdlaszako

05-30-2011, 10:08 AM

I like the new engine. I am going to wash mine today

A4 Effort

05-30-2011, 07:28 PM

Same idea for me, I use a old liquid fertilizer sprayer set on the highest setting to dispense Meguiars. works ok. makes good foam.

Yeah I tried the same thing but wasn't very successful. I'll try the home depot one. I just can't see dropping $60 on a gun from DD.

snowplau

05-30-2011, 07:31 PM

Went rallying... and forded two rivers, epic day, thank god for quattro lol. Vids n pics soon

dropshadow

05-30-2011, 07:43 PM

Is this the foam sprayer? http://is.gd/Z3izMY

That's a great price, I'm going to pick one up as well.

saul972

05-30-2011, 08:12 PM

Took the avant to Steve at Zinks garage had H&R springs installed and T-stat replaced on Friday.Bought some wheels from here as soon as I get them installed I'll post pics

B5S4/C5A6

05-31-2011, 04:04 AM

Yeah I tried the same thing but wasn't very successful. I'll try the home depot one. I just can't see dropping $60 on a gun from DD.

The Gun Phil sells, hooks up to a hose. This would be comparable to the cannon he offers for $120 which attaches to a pressure washer.

patastinky

05-31-2011, 09:47 AM

Installed JHM short shifter :)

migsan

05-31-2011, 06:11 PM

The new headliner mod almost done, and some exterior shots:

http://msgtc.no.sapo.pt//audi/projecto/silver515.JPG

http://msgtc.no.sapo.pt//audi/projecto/silver516.JPG

http://msgtc.no.sapo.pt//audi/projecto/silver517.JPG

http://msgtc.no.sapo.pt//audi/projecto/silver518.JPG

http://msgtc.no.sapo.pt//audi/projecto/silver520.JPG

http://msgtc.no.sapo.pt//audi/projecto/silver521.JPG

http://msgtc.no.sapo.pt//audi/projecto/silver522.JPG

http://msgtc.no.sapo.pt//audi/projecto/silver523.JPG

http://msgtc.no.sapo.pt//audi/projecto/silver524.JPG

I know that I need to lower it, but it's a bit complicate due to my garage entrance... :(

A4 Effort

06-02-2011, 06:12 AM

The Gun Phil sells, hooks up to a hose. This would be comparable to the cannon he offers for $120 which attaches to a pressure washer.

I like that it can attach to a pressure washer; would allow me to spray down the house, too. And you just can't beat $15 bucks.

dropshadow

06-02-2011, 06:49 AM

I picked up that $15 foam sprayer yesterday, will test it out tomorrow night.

B5S4/C5A6

06-02-2011, 07:45 AM

you mean $17 sprayer? lol

tankdeer

06-02-2011, 08:13 AM

Now I wish I had a pressure washer....

dropshadow

06-02-2011, 08:22 AM

you mean $17 sprayer? lol

No, I mean this $15 foam sprayer http://is.gd/Z3izMY

http://i.imgur.com/4jQsf.png

dropshadow

06-02-2011, 10:34 PM

This is what I just finished:

http://i.imgur.com/xGWsM.jpg

Finally got around to pulling my front bumper to install my OE bixenon projectors using the DIYs found in the B7 A4 forum. I also found out that my $20 ebay VAG-COM cable can code a lot more than I thought it could when I was able to recode the car from halogens to bixenons myself.

http://i.imgur.com/07r7p.png

Gdlaszako

06-03-2011, 06:13 AM

do you need a pressure washer or just a hose?

BCsniper

06-03-2011, 06:30 AM

If you want the awesome foam like you see in the DD threads then you really need a pressure washer. I have the foam gun for a regular hose and it's not exactly spectacular. I mean it's cool and it does what it's supposed to, but the car isn't absolutely covered in foam like you see on DD's pics, mostly just cause there;s a lot more water than foam when you use a regular hose

basically, get a pressure washer if you want to do it right/look cool.

Gdlaszako

06-05-2011, 03:20 PM

ok so i can use hose it just wont work perfectly

happy2B5

06-05-2011, 05:25 PM

step 3 of summer mode installed = fully polished SSR GT-3. Steps 1 and 2 = full exterior detail (wash, clay, polish, sealed) and lowered the coils (25+ up front, 25++ in rear)
Step 4 = install all my body bits and parts laying around including euro rear, RS4 hatch wing, Cupra lip (and remove mudflaps).

http://img.photobucket.com/albums/v313/vwpanic/031.jpg
http://img.photobucket.com/albums/v313/vwpanic/032.jpg

B5S4/C5A6

06-05-2011, 06:53 PM

The cannon is pressure washer and the gun is for a hose. Do it right, dont rig it.

Stubek

06-06-2011, 06:01 AM

Hauled a bunch of garden supplies and tools home from home depot.

dropshadow

06-06-2011, 06:56 AM

ok so i can use hose it just wont work perfectly

It won't work at all unless you have a quick connect fitting on your hose. It's made for a pressure washer.

Gumby

06-08-2011, 02:50 PM

Haven't posted anything in the avants section in a while....

But, yesterday I restriped the lip of my wheels black. The guy that mounted my new tires was nice enough to stack the finished ones on top of eachother. Chipped the hellout of the previous red time attack stripe they had.

http://i235.photobucket.com/albums/ee286/gumby13_ibtc/0855fe8f.jpg

Should be taking it out for some proper pictures in a few weeks. I'll make sure to post here for you guys.

bryzf1

06-08-2011, 02:56 PM

Should be taking it out for some proper pictures in a few weeks. I'll make sure to post here for you guys.

I can't wait to see the pics, you have the best looking allroad ever!

Gdlaszako

06-08-2011, 04:42 PM

you can't even tell that it is a allroad unless you really look

Stubek

06-08-2011, 05:12 PM

All road, that's how you got those wide fenders

Capt. Obvious

06-08-2011, 06:34 PM

Put new exhaust on my friend's shitbox while my Imola watched.

http://i671.photobucket.com/albums/vv75/dbartley82/Car%20Stuff/IMAG0262.jpg

Stubek

06-08-2011, 06:55 PM

Yup, that is a shit box. Would not touch that with out gloves on. Both look really nice.

tankdeer

06-08-2011, 07:08 PM

Is that shitbox missing the RS spoiler?

Capt. Obvious

06-08-2011, 08:18 PM

Correct, no RS spoiler. The one he had got ruined in shipping and hasn't been replaced yet.

jumpinj

06-08-2011, 09:09 PM

JHM tune installed! Almost got me HUGE ticket! It begs to be pushed. LOVE it.

snowplau

06-08-2011, 09:34 PM

034 stage 2 :)

patastinky

06-08-2011, 09:42 PM

PNW Avant

06-08-2011, 10:55 PM

Put new exhaust on my friend's shitbox while my Imola watched.

http://i671.photobucket.com/albums/vv75/dbartley82/Car%20Stuff/IMAG0262.jpg

Is this the car that was being sold partially finished on craigslist?

dropshadow

06-09-2011, 06:24 AM

What's it look like? I need to get me one :)

The cable? It looks like this: http://www.audizine.com/forum/showthread.php/158766-The-20-eBay-VAG-COM-Cable-Walkthrough-*Revisited*

Ian K

06-09-2011, 07:19 AM

Polo//S4

06-09-2011, 07:25 AM

Went for a drive.
http://3.bp.blogspot.com/-_73PQ8OY12s/Te_iCILRt4I/AAAAAAAAAQ0/t-m-MEm1FpM/s1600/b427b424fea34b5fb96c54536be5fa83_7.jpg

Capt. Obvious

06-09-2011, 09:30 AM

Is this the car that was being sold partially finished on craigslist?
Yes, same one. He ended up keeping it though.

BENI_BOY

06-09-2011, 11:58 AM

test fitted my wheels on my unfinished project

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/260378_10150194876511741_501861740_7508460_3396906 _n.jpg

bryzf1

06-09-2011, 12:00 PM

Props for deciding to go w/ the B7 RS4 bumper!

BENI_BOY

06-09-2011, 12:03 PM

thanks man it was a no brainer for me, i had to do it! i got another surprise coming too

tankdeer

06-09-2011, 12:11 PM

You did a great job of molding that bumper too. Looks OEM (for the B5 I mean).

hazMatt01

06-09-2011, 01:51 PM

Put GT's on it.

http://farm3.static.flickr.com/2682/5814180900_93ca652701.jpg (http://www.flickr.com/photos/boosted20th/5814180900/)
My S4 (http://www.flickr.com/photos/boosted20th/5814180900/) by Ian Kosiek (http://www.flickr.com/people/boosted20th/), on Flickr

Looks hot. Nice pic too.

Beni, great job with the bumper. Looks awesome.

Yesterday I gave my Avant a bath and took it for a ride.

Gdlaszako

06-09-2011, 02:42 PM

sat and looked at it for a while then looked for dents.

scdreger

06-12-2011, 10:53 AM

I just installed these stock S4 wheels I bought from Stasis:

http://www.audizine.com/classifieds/showproduct.php?product=53916&title=oem-2011-audi-s4-wheels26amp-3b-tires&cat=48

Looks pretty damn nice, even with the OEM Sport suspension. Stoked.

Gdlaszako

06-12-2011, 06:56 PM

so I figured that I would try to show some pictures.... but it won't let me can anyone help with that?

saul972

06-13-2011, 08:34 AM

Got wheels put on over the weekend.

http://dl.dropbox.com/u/9325356/Avant_Wheels/IMAG0049.jpg

http://dl.dropbox.com/u/9325356/Avant_Wheels/IMAG0054.jpg

Haenszel20v

06-13-2011, 08:52 AM

First full tank..........

http://img.photobucket.com/albums/v124/haenszel/IMAG0636.jpg

lnferno

06-13-2011, 09:08 AM

Hard-wired the radar detector and stealth install of smart cord.

http://i104.photobucket.com/albums/m180/Thelnferno/Audi/002.jpg
http://i104.photobucket.com/albums/m180/Thelnferno/Audi/001.jpg

Gdlaszako

06-13-2011, 11:16 AM

went for a drive

ProLux

06-13-2011, 12:48 PM

Test fitted some new wheels i finally got

http://inlinethumb63.webshots.com/45630/2497288490105500935S600x600Q85.jpg (http://good-times.webshots.com/photo/2497288490105500935iGZIJB)

Oh yea on my avant i just put the motor in

http://inlinethumb11.webshots.com/48522/2095598480105500935S600x600Q85.jpg (http://good-times.webshots.com/photo/2095598480105500935uSrvLd)

Capt. Obvious

06-14-2011, 09:49 AM

2.7T swap into a C5 Avant? Nice!

moclakens

06-14-2011, 10:30 AM

I have been wanting to do that FOR EVER!!!

I'm just to broke and lazy[:(]

patastinky

06-14-2011, 12:33 PM

Installed JHM short shifter. The Stratmosphere Short Shifter that was previously installed was a notchy POS..

ProLux

06-14-2011, 03:45 PM

2.7T swap into a C5 Avant? Nice!

Yes 2.7t in C5 Avant. I have a build thread started. Stg 2+ chip 3" DP's 2.5" custom exhaust and front mount intercooler.

Moclakens, beleive me If I didn't get the motor for a steal I would not b doing this! Especially being a 6 Spd. I had to!

PNW Avant

06-15-2011, 09:49 PM

I have been wanting to do that FOR EVER!!!

I'm just to broke and lazy[:(]

Moclakens...what up with the sig?? Where my car?

Polo//S4

06-18-2011, 10:05 PM

Took a photo of it...
http://3.bp.blogspot.com/-xlo4YxD_u9M/Tf1HJICn1GI/AAAAAAAAAQ8/rXd61qflnLg/s1600/DSC_0142.JPG

Avant1.8BT

06-18-2011, 10:28 PM

re tinted

http://i52.tinypic.com/hrzlaa.jpg

moclakens

06-19-2011, 12:27 AM

Moclakens...what up with the sig?? Where my car?

It is still here:) It is just being driven by my dad until I finish school.

Oaks

06-21-2011, 01:19 PM

got a present in the mailroom

http://farm6.static.flickr.com/5264/5857045361_966ca9c3fa_z.jpg

warranty replacement

snowplau

06-22-2011, 12:25 AM

http://tapatalk.com/mu/a6cd8b66-98bd-1716.jpg
Got the front end painted :)

87supraman

06-22-2011, 03:22 AM

Just gave her a pep talk about how we are driving 1600 miles today. Augusta GA to El Paso TX. Fresh oil, plugs, new tires, extra coil packs and crossed fingers!

ProLux

06-22-2011, 04:32 AM

hey superman...wouldn't it be cheaper to fly? Corny...i know :-)

BCsniper

06-22-2011, 06:20 AM

Just gave her a pep talk about how we are driving 1600 miles today. Augusta GA to El Paso TX. Fresh oil, plugs, new tires, extra coil packs and crossed fingers!

good luck man, have a safe and fun drive. Sounds like you should be good to go.

rollerton

06-22-2011, 07:12 AM

Chain tensioner seals, valve cover gaskets, plugs, Aero wipers, brake pads on the right rear. I think the caliper might be toast;
Do we even need rear brakes!? Naaaah.

http://i27.photobucket.com/albums/c168/zer0b0y/P1020926.jpg

87supraman

06-22-2011, 08:11 PM

hey superman...wouldn't it be cheaper to fly? Corny...i know :-)
Yes, it would. But I'm moving there.. not by choice.. silly US Army.

good luck man, have a safe and fun drive. Sounds like you should be good to go.
Thanks!

I guess I better show a picture. Rear is about 3mm from rubbing. Original worn out sport suspension.
http://i1218.photobucket.com/albums/dd416/Dan_Emily86/IMG_0169.jpg

Stubek

06-22-2011, 09:18 PM

Dropped it at Audio Design for the final audio upgrades and a little custom interior work. I get it back Monday

Capt. Obvious

06-23-2011, 09:02 AM

Started removing the stock downpipes from my car to install my new 3" ones. Man, getting the OEM DPs is a major pain in the ass! And one of the studs snapped off the turbo too. [headbang]

snowplau

06-23-2011, 10:29 AM

Crammed my polar bearhttp://tapatalk.com/mu/a6cd897c-77f4-34d5.jpg in for a quick smash to the dogpark

snowplau

06-23-2011, 10:30 AM

miggity02

06-23-2011, 09:32 PM

JHM short shift, plugs, full seafoam treatment, and going to swap my USPs from the B6 to the B5 avant and putting the RS6 reps on the B6.

Turbwhistle

06-23-2011, 10:01 PM

Put new exhaust on my friend's shitbox while my Imola watched.

http://i671.photobucket.com/albums/vv75/dbartley82/Car%20Stuff/IMAG0262.jpg
That shit box happens to be my favorite shit box.

thanks man it was a no brainer for me, i had to do it! i got another surprise coming too
Hows the progress, whats the estimated time till finished?

Gdlaszako

06-24-2011, 05:13 PM

drove mine up Morrison. =) gave a bath the other day to wish i could show pics

kneel

06-24-2011, 10:24 PM

Installed 3"dp back center resinators. Sound little raspy when your rev at idle, but under load it sounds amazing. A little deeper but more refined than before.

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/264273_10150206782090178_539685177_7490621_604472_ n.jpg

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/267532_10150206782295178_539685177_7490626_2170017 _n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/268872_10150206778855178_539685177_7490559_3566439 _n.jpg

SurferD

06-25-2011, 06:54 AM

Hard-wired the radar detector and stealth install of smart cord.

I have been meaning to do this with the V1. Was it difficult?

SurferD

06-25-2011, 06:57 AM

Started removing the stock downpipes from my car to install my new 3" ones. Man, getting the OEM DPs is a major pain in the ass! And one of the studs snapped off the turbo too. [headbang]
I feel ya! Were you on your back or did you have a lift? I did my TIP DP's (curvy pipes, no room around the huge tranny) on the ground, it was the worst job yet on this car.

wpg2.0T

06-25-2011, 09:06 PM

See: http://www.audizine.com/forum/showthread.php/436529-Got-my-new-mod-today

SoCalS4Avant

06-25-2011, 09:15 PM

Took her on the highest pass in Southern California, at 8,500 feet.

http://tapatalk.com/mu/a6cd8948-b1c4-ce2b.jpg

http://tapatalk.com/mu/a6cd8948-b218-9a82.jpg

kneel

06-25-2011, 09:15 PM

added coil pack adapters and mkvi coil packs and mkvi plugs. Whie doing this found a large evap leak. Fixed that with some tubing from Home Depot, i had left over form the charcoal canister delete.

pic:

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/261345_10150207725380178_539685177_7500375_890055_ n.jpg

jumpinj

06-26-2011, 07:47 AM

Coolant Flush. A/C service/flush (50% low with good pressure test) blows at 41 degrees now :-) New alt belt/tensioner/pulley and finally starter

finished my mods for a while. Stern motor/tranny mount. Apikol rear diff/snub mount and last but not least JHM LWCP.

tada!

spoon

06-27-2011, 09:59 AM

new tires, hankook v12s

http://i1218.photobucket.com/albums/dd409/spoondoggydog/Audizine/IMG_20110627_085827.jpg

SoCalS4Avant

06-27-2011, 10:15 AM

new tires, hankook v12s

http://i1218.photobucket.com/albums/dd409/spoondoggydog/Audizine/IMG_20110627_085827.jpg

You'll like them! Nice pic, too.

Gdlaszako

06-27-2011, 11:49 AM

going to give her another bath today.......pikes peak got her dirty[:(]

ProLux

06-28-2011, 04:00 PM

ummm stanced it!

http://inlinethumb45.webshots.com/46636/2679624100105500935S600x600Q85.jpg (http://good-times.webshots.com/photo/2679624100105500935PpXYct)

rears

http://inlinethumb25.webshots.com/45848/2996311390105500935S600x600Q85.jpg (http://good-times.webshots.com/photo/2996311390105500935rzkMRn)
http://inlinethumb50.webshots.com/48881/2441716250105500935S600x600Q85.jpg (http://good-times.webshots.com/photo/2441716250105500935yGpcpd)

fronts
http://inlinethumb39.webshots.com/46566/2428363740105500935S600x600Q85.jpg (http://good-times.webshots.com/photo/2428363740105500935lJtGUz)
http://inlinethumb41.webshots.com/48104/2900555820105500935S600x600Q85.jpg (http://good-times.webshots.com/photo/2900555820105500935wOiZJu)

Stubek

06-28-2011, 08:45 PM

got the car back with painted cluster surround and the area around the door handles painted piano black to match the belt line.
I used the Osir chrom accents on the cluster, but they don't quite match the silver in the rest of the car, so they will be painted to match next week
http://img.photobucket.com/albums/v311/stubek/Avant/IMG_2238.jpg

And the area around the door handles to match the belt line...
http://img.photobucket.com/albums/v311/stubek/Avant/IMG_2241.jpg
http://img.photobucket.com/albums/v311/stubek/Avant/IMG_2234.jpg
http://img.photobucket.com/albums/v311/stubek/Avant/IMG_2232.jpg

evo_ski

06-28-2011, 10:38 PM

Gumby

06-28-2011, 11:16 PM

Raised my coilovers up a bit so I don't rub. They settled almost half an inch on a two day cruise [o_o] Also adjusted my roof rack so it's perfectly straight, I sort of threw it on quick when I installed it initially.

BTW, thanks for the rack Rollerton!

And the results, rides way better now :)
http://i235.photobucket.com/albums/ee286/gumby13_ibtc/5c88aefb.jpg

evo_ski

06-29-2011, 07:32 AM

Gumby, saw your ride on the cruise that thing was insane I wish I could have nabbed a couple pics of it.

tankdeer

06-29-2011, 07:52 AM

Best AR on the site - easily. [up]

Gdlaszako

06-29-2011, 02:11 PM

More Pics.

Saracen

07-01-2011, 10:51 AM

Ordered a bunch of maintenance items from ECS, PureMS and 034:

034 Street density mounts
034 tranny mount
Stern snub mount
NGK BRK7E's
Fuel filter
cabin filter
Timing belt kit + WP
Oil change kit
K&N filter
Cabin filter
New floormats
Touareg 9 volt LED torch

and ordering new tires tomorrow. probably Hankook V12's.

CARTEL

07-01-2011, 11:21 AM

CARTEL

07-01-2011, 11:37 AM

Drove it up to Tahoe with bike in tow... mmmmm, Tahoe singletrack.

http://hellaawesomebro.com/images/avant_sycip.jpg

Gdlaszako

07-01-2011, 06:40 PM

[drool]please

jojoampt

07-01-2011, 08:02 PM

took her for a drive to the beach.... shitty photo, i know.....
http://i187.photobucket.com/albums/x179/jojoampt/HPIM0604.jpg

not today, but a couple of weeks ago..... got her a new sister... my girlfriends new (to her) 2008 s-line A3 6spM, black on black [drive] its actually pretty damn fun!
http://i187.photobucket.com/albums/x179/jojoampt/jessieandblackbird.jpg

Gumby

07-01-2011, 11:30 PM

Holy god. Dude, dude... that's awesome.

haha, thanks Tony.

i'll trade you straight up [;)]

D's Avant

07-02-2011, 07:33 AM

haha, thanks Tony.

i'll trade you straight up [;)]

Now that would be a fun trade... Both are awesome Avants/Allroads!!!

kneel

07-02-2011, 09:24 AM

Drove it up to Tahoe with bike in tow... mmmmm, Tahoe singletrack.

http://hellaawesomebro.com/images/avant_sycip.jpg

doing a pre-run for avantober fest??? hehe

Gdlaszako

07-02-2011, 11:06 AM

jojoampt

07-02-2011, 12:11 PM

does that have some good kick to it?

The A3? It actually does. Really fun to drive. Although after driving Quattro for so long I can REALLY tell its FWD. Perfect for the lady though. She came from an 04 A4 Avant 1.8 with Tiptronic and hated it. She felt the Avant couldnt get out of its own way... so she is really happy with the manual 2.0. I think with a tune it would be even better. (obviously [>_<]) Although the way shes driving it around already Id be scared to get it chipped. haha! [o_o][drive]

Gdlaszako

07-02-2011, 06:56 PM

thats sweet that she hated the tiptronic. you should always get it chipped

http://dl.dropbox.com/u/10732607/DSCF2760_2.jpg

Stubek

07-03-2011, 09:42 PM

Just installed Euro LED tails on my 2011 North American Avant...
http://www.audizine.com/forum/showthread.php/416273-LED-Tail-light-programing-finaly-cracked-New-Video-Added?p=6657070&viewfull=1#post6657070

Korrect414

07-03-2011, 09:54 PM

Turbwhistle

07-04-2011, 09:08 PM

I did a quick detail to the SOB, pictures tomorrow, its dark out now.

kneel

07-04-2011, 09:15 PM

loaded car with stroller, 3 beach chairs, cooler filled with food, snacks and drinks for kids, 3 kids and the wife!
REALIZED i need a bigger Avant or need to put the Thule Box back on

Saracen

07-04-2011, 10:57 PM

I need to grab basically the same exact stuff.

I still need to order control arms, and tranny fluid/gear oil/diff oil, etc. Oy

altavant

07-05-2011, 07:44 AM

I washed and waxed...and stared at her a lot..trying to get used to the new wheels..

http://www.audizine.com/gallery/data/500/s4_wheels_34.jpg

Gdlaszako

07-05-2011, 10:21 AM

I worked with a paint pen. its the big one
before
http://dl.dropbox.com/u/10732607/DSCF2885.JPG

After
http://dl.dropbox.com/u/10732607/DSCF2886.JPG

Turbwhistle

07-05-2011, 03:56 PM

I ordered a test pipe and a 25' audio cable so i can use my ipod im my car.

Gumby

07-08-2011, 10:28 AM

i had to pull my passenger side headlight out yesterday, and separate the housing so i could push the level adjuster back into the socket. friggin thing pulled out when i was trying to level my headlights [headbang]

http://i235.photobucket.com/albums/ee286/gumby13_ibtc/566974c6.jpg

but the UPS man did show up with a few replacement parts for my roof rack when i was working on it, including a new faring [up]

tankdeer

07-08-2011, 10:50 AM

So mean looking. Love it

Gdlaszako

07-09-2011, 08:29 AM

So mean looking. Love it
It's like a angry football player

tankdeer

07-09-2011, 10:40 AM

It's like a angry football player

But smarter

Gdlaszako

07-09-2011, 01:39 PM

defiantly

dropshadow

07-09-2011, 01:46 PM

Defiantly? As in a rebellious manner? Maybe you were looking for "definitely?"

huemul2

07-09-2011, 01:59 PM

Today I went to the track with my avant and put down a 13.3 in the 1/4 mile

Saracen

07-09-2011, 10:17 PM

dropshadow

07-10-2011, 04:51 PM

Ordered coilovers for it. Install scheduled on the 23rd.

Gdlaszako

07-10-2011, 04:55 PM

Defiantly? As in a rebellious manner? Maybe you were looking for "definitely?"
ya I was

ChumbaWumba

07-10-2011, 07:34 PM

got a no state inspection ticket for it. Bought it and registered it in April from Vermont and I am still rocking the Vermont state inspection sticker.

Gdlaszako

07-11-2011, 07:18 AM

wondered what happened to her when I got up this morning. then I found out my dad took her. It really scared me because I have a garage spot to.

flynnr

07-11-2011, 03:46 PM

Today I went to the track with my avant and put down a 13.3 in the 1/4 mile

any vids of the track day? or more info?

Old No.7

07-11-2011, 11:03 PM

Added a new Votex rear spoiler

http://i199.photobucket.com/albums/aa76/OLD_NO_7/IMG_3801.jpg

http://i199.photobucket.com/albums/aa76/OLD_NO_7/IMG_3739.jpg

evo_ski

07-11-2011, 11:06 PM

The Gallardo's are so amazing. Seeing them in person at BCC was awesome. Car looks incredible!

Old No.7

07-12-2011, 12:10 PM

The Gallardo's are so amazing. Seeing them in person at BCC was awesome. Car looks incredible!

Thanks man!

bblume

07-12-2011, 01:40 PM

finally got some proper tips for the borlas from Techtonics
http://i301.photobucket.com/albums/nn44/bblume8/photo-79.jpg
Now if I can just keep them clean[:/]

SoCalS4Avant

07-12-2011, 01:45 PM

finally got some proper tips for the borlas from Techtonics
http://i301.photobucket.com/albums/nn44/bblume8/photo-79.jpg
Now if I can just keep them clean[:/]

Always keep your tip clean, buddy!

Looks good, though...damn big, but good.

Turbwhistle

07-12-2011, 05:42 PM

I attempted to install this but i elfin failed (face palm)
http://i1087.photobucket.com/albums/j480/turbwhistle/08C34CF1-orig.jpg

kneel

07-12-2011, 06:26 PM

finally got some proper tips for the borlas from Techtonics

Now if I can just keep them clean[:/]

Oven and Grill Cleaner......works like a charm. Spray it on it will disolve all the soot and road grim, then just wipe off.

Gumby

07-12-2011, 08:24 PM

I attempted to install this but i elfin failed (face palm)
http://i1087.photobucket.com/albums/j480/turbwhistle/08C34CF1-orig.jpg

i always found it easiest to disconnect the DP from the catback and pull the whole DP and cat assembly out through the top. after everything is out install the TP, and reinstall.

Turbwhistle

07-12-2011, 08:26 PM

Only problem with that was that the threads looked non existent for to remove the clamps.

KiddEng

07-13-2011, 06:09 PM

Votex spoiler finally mounted...and a wash after a long while.

http://www.audizine.com/gallery/data/500/medium/Avant_DroidHDR3.jpg

SoCalS4Avant

07-14-2011, 08:31 AM

Votex spoiler finally mounted...and a wash after a long while.

http://www.audizine.com/gallery/data/500/medium/Avant_DroidHDR3.jpg

Close ups of Votex.

SoCalS4Avant

07-14-2011, 08:31 AM

Votex spoiler finally mounted...and a wash after a long while.

http://www.audizine.com/gallery/data/500/medium/Avant_DroidHDR3.jpg

Close ups of Votex.

Oaks

07-14-2011, 09:51 AM

gave her a bath

http://farm7.static.flickr.com/6002/5937524910_4771acdf41_z.jpg

dropshadow

07-14-2011, 10:13 AM

Close ups of Votex.

http://seanblog.com/a4/hatchspoiler.jpg

Turbwhistle

07-14-2011, 06:00 PM

i always found it easiest to disconnect the DP from the catback and pull the whole DP and cat assembly out through the top. after everything is out install the TP, and reinstall.

Thanks for your help, the deed is done. =) boost seems to start sooner, a little better throttle response with everything stock from the tp back, doesn't sound bad, but would like to go 2.5" all the way. Well thanks again for your help.

naiku

07-15-2011, 05:28 AM

Votex spoiler finally mounted...and a wash after a long while.

Looks good, gives me an idea of what my Votex spoiler will eventually look like, mine has been sitting since around January. Do you have S4 door blades?

KiddEng

07-15-2011, 06:23 AM

Looks good, gives me an idea of what my Votex spoiler will eventually look like, mine has been sitting since around January. Do you have S4 door blades?

lol mine sat around for about 8 months after i got it painted...should of done it sooner as it was easy to lineup/mount and just puts a finishing touch on the ride.
yep i got oem s4 door blades on her, much improvement over the stocks!

naiku

07-15-2011, 07:50 AM

lol mine sat around for about 8 months after i got it painted...should of done it sooner as it was easy to lineup/mount and just puts a finishing touch on the ride.
yep i got oem s4 door blades on her, much improvement over the stocks!

Mine is not even painted!! haha. I am hoping to do it some time soon, what did you mount it with? and the S4 door blades really do look good, other than the spoiler, the S4 blades are probably the only other exterior mod I plan to do.

stuntfish

07-15-2011, 10:50 AM

I bought mine well Today. 2007 S4 6speed manual avant W/ VF engineering supercharger.. I'll post pics soon

tankdeer

07-15-2011, 10:56 AM

I bought mine well Today. 2007 S4 6speed manual avant W/ VF engineering supercharger.. I'll post pics soon

White one. Been for sale on CL for quite some time now.

stuntfish

07-15-2011, 11:45 AM

Yeah that's the one. I have had a couple B5 S4's stage II+ but always wanted something newer but just felt like the power to performance was not that great for the B6/B7's. I'd seen the car for sale but it was out of my price range. I seen he lowered his price a couple weeks ago so i called him drove it made an offer and didn't buy the winter tires. I told the seller i would not tell anyone what I paid for the car but all i can say is I got a great deal on a B7 Avant much less for this car.

tankdeer

07-15-2011, 11:47 AM

Lol. well congrats. I had wondered why it was for sale for so long, but figured it was due to the price. That and I'm sure some people were skeptical about buying a supercharged S4

55fanatic

07-15-2011, 03:27 PM

Who sees what I did today?

http://tapatalk.com/mu/47f5ecd2-be86-bb5c.jpg

Ok... I finished making the car matte white

Naudi_Mat

07-15-2011, 04:59 PM

Who sees what I did today?

http://tapatalk.com/mu/47f5ecd2-be86-bb5c.jpg

Ok... I finished making the car matte white

Did you wrap it or paint it?

55fanatic

07-15-2011, 09:38 PM

Plasti Dip

KiddEng

07-15-2011, 10:02 PM

I am hoping to do it some time soon, what did you mount it with? and the S4 door blades really do look good, other than the spoiler, the S4 blades are probably the only other exterior mod I plan to do.

i used 2 rolls of 3M tape on it lol, it's holding pretty well except this one corner where i didn't put enough, the wind is kinda getting under and lifting. im gonna find some epoxy and a syringe to inject it under. If iwere to do it again, i suggest putting some epoxy from the get go w/ 3M.

im a big fan of s4 blades... do you got front lip? i suggest adding that to the list as well (cupra) [up]

Stubek

07-18-2011, 08:26 AM

With the help of DavidB8 over the internet and lots of research from Alex@Europrice, I became the first North American B8 Avant to have RoW LED tail lights fully functional!

http://www.youtube.com/watch?v=T6INVhOTUTo
Took about 90 minutes for the original install, about 90 minutes more of wiring and pin changes yesterday, and 2-3 hours of coding from David, but it rocks!
You can see it all at http://www.audizine.com/forum/showthread.php/425391-A4-LED-Taillight-Retrofit-Package-Group-Purchase...?p=6693999#post6693999

spd33

07-18-2011, 09:54 AM

New front brakes for mine. Schwaben crossdrilled/slotted rotors and PBR Ultimate Ceramic pads. After bedding them in, significant improvement in braking and pedal feel. We'll see how fast they eat the pads.

http://c1552172.r72.cf0.rackcdn.com/9553_x600.jpg

jonnybravo

07-20-2011, 09:04 AM

Is this paint or a vinyl wrap?

gave her a bath

http://farm7.static.flickr.com/6002/5937524910_4771acdf41_z.jpg

SoCalS4Avant

07-20-2011, 09:17 AM

I'll answer for him, because he won't mind, it's vinyl wrap.

boostedAvant

07-20-2011, 10:14 AM

Been doing a lot of work to the Avant the last week or so. New dipstick tube, oil change, new MAF, new front 02 sensor, new timing belt and tensioner, Fixed the front bumper, Wash/Vaccum, Cleaned the engine bay, and an overall inspection (just rolled 100k).

55fanatic

07-20-2011, 10:29 AM

Just installed my short shifter and yesterday I gloss black Vinyled my roof to complete the storm trooper look. Waiting on my retrofitted headlights and the car is visually completed(for now)

55fanatic

07-20-2011, 10:30 AM

Just installed my short shifter and yesterday I gloss black Vinyled my roof to complete the storm trooper look. Waiting on my retrofitted headlights and the car is visually completed(for now)

http://tapatalk.com/mu/a689891e-10a8-09b4.jpg

altavant

07-21-2011, 07:02 AM

..did B5 lower spring perches...me likely lot

http://www.audizine.com/gallery/data/500/s4_caps.jpg

shameless plug for Streamline..great work!

http://www.audizine.com/gallery/data/500/streamline_s.jpg

raveadelic

07-21-2011, 10:16 AM

I just got a speed sensor replaced, tie rod end replaced, and had an alignment...

Gdlaszako

07-24-2011, 09:29 AM

I gave her a bath I will post pics later

Gdlaszako

07-24-2011, 10:35 AM

Looks good right

http://dl.dropbox.com/u/10732607/all%203.jpg

7speed

07-25-2011, 01:14 PM

Gave the rear a little love

http://i447.photobucket.com/albums/qq194/audizine/Avant%20Build/IMG_9632.jpg

http://i447.photobucket.com/albums/qq194/audizine/Avant%20Build/IMG_9633.jpg

http://i447.photobucket.com/albums/qq194/audizine/Avant%20Build/IMG_9634.jpg

http://i447.photobucket.com/albums/qq194/audizine/Avant%20Build/IMG_9637.jpg

http://i447.photobucket.com/albums/qq194/audizine/Avant%20Build/IMG_9641.jpg

http://i447.photobucket.com/albums/qq194/audizine/Avant%20Build/IMG_9642.jpg

Stubek

07-25-2011, 01:39 PM

not sure I like the lack of a clear backup light, I find that pretty functional. If you tried at night yet?

7speed

07-25-2011, 01:52 PM

Yes I did and yes I noticed a huge difference. Small price to pay I guess. I also installed these

http://i447.photobucket.com/albums/qq194/audizine/IMG_9619.jpg

flynnr

07-26-2011, 05:46 PM

the seats? nice!

moyenecorniche

07-27-2011, 09:38 AM

FUCKING AWESOME! a friend of mine wrapped his v10 tdi taureg in matte white! So excited for this!

Very nice......
Pardon Me My Good Man...Hee...Hee.. But what are those BBS models of wheels..??? they remind me of the old style in Road Racing before the sourpusse's decreed that Quattro's were an unfair advantage...

Thanks

Ruffiano

07-27-2011, 09:45 AM

shameless plug for Streamline..great work!

http://www.audizine.com/gallery/data/500/streamline_s.jpg

Car looks great, but streamline pisses me off, they won't touch "old" audis.

moyenecorniche

07-27-2011, 09:46 AM

OK, so got to go to a meet @ Applebee's in Warwick @ 8pm.. ( first time ) So I Have decided I have had enough of the chrome trim around the front radiator grille. fairly easy to pop off the car and equally so to pop the chrome bezel off, tabs are tricky but with a flat head screwdriver, prying from one side to the other carefully it was easy and no broken tabs. I was going to keep the license plate off but those horrendous screw holes into the bumper solved that idea....Have to take pics will edit and add in a bit.

So after removing the grilles and separating the chrome outer trim I installed the grilles back in to see if indeed this was the look I wanted

http://i657.photobucket.com/albums/uu294/MarcJM/ef8cac40.jpg

Grilles outer trim ready to sand with 150 and 400 then paint
Have decided blacked out rings are too much, at least for the time being

http://i657.photobucket.com/albums/uu294/MarcJM/9d3a2e27.jpg

Will have to find a more appropriate before and after matching pics...

With both Grille assemblies reinstalled

http://i657.photobucket.com/albums/uu294/MarcJM/d77edc25.jpg

Finally with all Grilles, LP and detailed and ready to go to the meet.

http://i657.photobucket.com/albums/uu294/MarcJM/e1101a81.jpg

will have to find a better before pic to add, only took the afternoon to repaint the grilles as well as detail the QuaVant.

patastinky

07-27-2011, 10:39 AM

Gave the rear a little love

How are people suppose to know when you're backing up!?

7speed

07-27-2011, 05:30 PM

It still gets pretty white back there, more like really bright pinkish.

evo_ski

07-27-2011, 06:59 PM

Test fitting the winters! 18x8 SLR reps with 225/40/18 Conti DWS.... pumped. Also, this week I installed a Vogtland GT kit and two weeks ago I installed a stealth sub box in the drivers side quarter, sounds awesome.

http://farm7.static.flickr.com/6149/5983379484_e6b0e8beb5_b.jpg

http://farm7.static.flickr.com/6014/5983378616_f01fc5a50c_b.jpg

ndwelle08

07-27-2011, 08:41 PM

Installed st coils, and new wheels today. will update with a finished product but this is a pic of the madness
http://img828.imageshack.us/img828/8522/imag0485iy.jpg

Turbwhistle

07-27-2011, 08:42 PM

^ nice log.. what is it oak?

ndwelle08

07-27-2011, 08:46 PM

you know it haha

PNW Avant

07-27-2011, 09:12 PM

Test fitting the winters! 18x8 SLR reps with 225/40/18 Conti DWS.... pumped. Also, this week I installed a Vogtland GT kit and two weeks ago I installed a stealth sub box in the drivers side quarter, sounds awesome.

Pics of sub box? I have something similar that I haven't installed yet.

kneel

07-27-2011, 09:46 PM

Pics of sub box? I have something similar that I haven't installed yet.

x2 on pics of the sub box

naiku

07-28-2011, 04:37 AM

Pics of sub box? I have something similar that I haven't installed yet.

x2 on pics of the sub box

If you guys want, I can also take a pic of my sub box. It is for a B7, but I imagine should be fairly similar to the B6.

Veereihen6

07-28-2011, 08:57 AM

If you guys want, I can also take a pic of my sub box. It is for a B7, but I imagine should be fairly similar to the B6.

x3 yes please! :)

evo_ski

07-28-2011, 09:28 AM

At the moment it is still somewhat of a work in progress since I am working on getting the stock cover to not rattle when it is closed. The cover closes just fine so everything in the back appears stock, which is exactly what I was going for. Basically I made a 7x7x7x14 inch trapezoid for the top and bottom pieces and then made it 18 inches tall. It fits perfectly in that corner with the XM box and all of the other parts relocated. I simply tucked the XM box up and behind the little metal flap next to where it was already and used 3M double sided tape to hold it in. Then I dynamatted the entire corner including the "fart flap" so it wouldn't keep rattling when bass would hit. The sub is a 10 inch Pioneer shallow sub and I think it provides plenty of bass for my taste. It sounds very crisp and gives you solid kick drums and bass notes for lots of different music, but never really gets boomy. I have it paired with an Apline PDX-5 amp mounted where the Bose stuff was on the other side. I used the Polk DB6501's in the doors and after some tweaking with my external eq I have it dialed in perfectly. The box fit so well in that spot that all I really did to secure it was use some egg crate style foam on the bottom and all sides that would be touching metal. Then I made a small metal brace and attached it to the car using one of the bolts that came off of the Bose Box from the other side. I put the speaker protector on there just to be sure when the stock panel was fitted it wouldn't end up touching the speaker. Once I find a good way to make that panel not rattle I will post up my solution.

Hit me up with any questions or build plans as I would love to help you guys out.

Wiring and tape job on the sub protector is a bit shoddy, but since you never see it I don't really feel the need to clean it up too much.

http://farm7.static.flickr.com/6025/5984470863_26a37de21b_b.jpg

http://farm7.static.flickr.com/6148/5984471597_3599c27648_b.jpg

naiku

07-28-2011, 10:26 AM

Here is mine, similar to evo_ski, except my box has different dimensions as I do not have a shallow sub. For now the XM box is just sitting on the top, its not gone anywhere in the couple weeks I have had the box in there. At some point I plan to fabricate a grill to replace the original panel, just trying to find the best material to make it with at the moment. Will probably get some perforated metal from Lowes and shape it to the door, then cover it in carpet to match the trunk. I might also put something under the box to raise it up a little, the picture makes it look like the speaker is touching the trim, but it is not, however when the door is on it does touch. So for now I leave the door off.

http://img268.imageshack.us/img268/1056/07282011072.jpg (http://imageshack.us/photo/my-images/268/07282011072.jpg/)

The amp and processor are just loose behind the door on the passengers side, I need to tidy up the wiring some and secure them in there a bit better. But, for now they have not caused me any problems so not too worried about it.

http://img691.imageshack.us/img691/8063/07282011073.jpg (http://imageshack.us/photo/my-images/691/07282011073.jpg/)

evo_ski

07-28-2011, 10:39 AM

Very nice! Looks almost identical to mine. You could always trade me components though if you like.....[:D]

naiku

07-28-2011, 10:53 AM

Very nice! Looks almost identical to mine.

I almost did not post pictures as they look so similar!

You could always trade me components though if you like.....[:D]

Sure, I will trade you my 4 channel Alpine for your PDX5 [:D] I want to run my front components active, currently have Vifa tweeters, Arc Audio mids using an MPyre crossover but I am hoping to at some point sell/trade the Alpine and pick up a 5 channel. A PDX5 or Massive Audio NX5 would be nice, both currently out of my budget though.

evo_ski

07-28-2011, 11:05 AM

Isn't that the top end Elemental sub? Kinda hard to tell from just the pic. I got lucky and snagged that PDX5 off craigslist brand new for $220 a while ago.

Stubek

07-28-2011, 11:12 AM

Since we are showing subs
http://img.photobucket.com/albums/v311/stubek/Avant/AudioDesign/IMG_0239.jpg
http://www.audizine.com/forum/showthread.php/422032-Avant-custom-subwoofer-install?p=6362097#post6362097

For today, I actually added the R8 oil cap since it was on sale on ECS last week, so that gives me at least 2hp

naiku

07-28-2011, 11:20 AM

Isn't that the top end Elemental sub? Kinda hard to tell from just the pic. I got lucky and snagged that PDX5 off craigslist brand new for $220 a while ago.

No, its more of a mid level sub, its an 11KV.2, I have had it for a few years now. Was running it under the seat in my F150 before putting it in the Audi.

Since we are showing subs

That looks good, is there as much space behind those panels in the B8 Avant as in the B8 Sedan? I took off one of those panels when I had a loaner 2011 sedan and there was a huge amount of room back there (obviously once the stock amp etc would be removed).

Stubek

07-28-2011, 11:28 AM

No, its more of a mid level sub, its an 11KV.2, I have had it for a few years now. Was running it under the seat in my F150 before putting it in the Audi.
That looks good, is there as much space behind those panels in the B8 Avant as in the B8 Sedan? I took off one of those panels when I had a loaner 2011 sedan and there was a huge amount of room back there (obviously once the stock amp etc would be removed).
This is behind the left side panel. The silver amp on top is the B&O, then the black amp in the middle is for my sub, then under that is the computer/hdd for the Nav and jukebox, MMI, etc.
http://img.photobucket.com/albums/v311/stubek/Avant/IMG_0454.jpg

This is behind the right panel. There is a bit more room behind it because the BCM module is forward of the panel and the fuses are down low, but it is all taken up by the sub box. I should take a picture of the box.
http://img.photobucket.com/albums/v311/stubek/Avant/IMG_2242.jpg

ndwelle08

07-28-2011, 05:56 PM

New Shoes!
http://img812.imageshack.us/img812/732/imag0488.jpg

BMackAvant

07-29-2011, 01:40 AM

Washed, waxed and detailed with all Adams Polishes products, in preparation for So Cal GTG, if I can make it. Swapped out all 3 S-line badges with Black ones. I also have interior LEDs en route, hopefully I'll get/install them by Saturday.

97A6

07-29-2011, 10:41 AM

Did the S4 seat swap. :)

55fanatic

07-29-2011, 04:55 PM

Installed my freshly retrofitted headlights.

martianbooby

08-01-2011, 11:25 PM

did this:(gheto cai)

http://img.photobucket.com/albums/v368/yamov323/IMG_1462.jpg
http://img.photobucket.com/albums/v368/yamov323/IMG_1465.jpg
http://img.photobucket.com/albums/v368/yamov323/IMG_1469.jpg

working on a heat shield now and a filter for the sai pump hose (i know the reduced diameter causes drop in pressure but the extra velocity sounds awesome so i dont mind)

moyenecorniche

08-02-2011, 06:29 AM

Stubek

08-02-2011, 06:32 AM

Saturday started with a car wash, then a dyno run at the 034 Motorsports open house
http://img.photobucket.com/albums/v311/stubek/Avant/B8_A4_2011_20TFSI_APR_Stg1_91oct_dyno.jpg

Then had an APR Carbonio and 034 inlet hose installed

martianbooby

08-02-2011, 03:57 PM

Did you use that PVC elbow...? I would be concerned about the pvc thickness in relation to heat deformation. You may not have a problem with a thicker walled same diameter elbow but that one may cause you problems.
I would be wary and keep a close eye on it ( hopefully not while driving ) for possible deformation.

yup used that pvc elbow... and all the heat wrap went on it for the same reason you mentioned... i will keep a close eye on it tho im not done yet, still working on a heat shield (thinking of doing something with water inside of it) and the elbow will get more wrap on it...
i did a few 60-100 pulls after about 15 min on the highway and then pulled over and the elbow definitely gets hot but not to the point of melting yet lol

one thing is for sure, the throttle sounds ten times more deep now... if it wasnt my car i would think it had aftermarket exhaust setup....

Gdlaszako

08-02-2011, 04:31 PM

moyenecorniche

08-02-2011, 05:13 PM

yup used that pvc elbow... and all the heat wrap went on it for the same reason you mentioned... i will keep a close eye on it tho im not done yet, still working on a heat shield (thinking of doing something with water inside of it) and the elbow will get more wrap on it...
i did a few 60-100 pulls after about 15 min on the highway and then pulled over and the elbow definitely gets hot but not to the point of melting yet lol

one thing is for sure, the throttle sounds ten times more deep now... if it wasnt my car i would think it had aftermarket exhaust setup....

Not to sound like the neighborhood alarmist again but if I remember correctly ( I'm familiar with PVC piping, having installed multiple septic systems, french drains and quite a few other resourceful applications )
However that elbow's wall thickness is perhaps 1/8th" whereas the next size is at least 3/16th.
I was thinking that over time PVC has a tendency to become brittle depending on the PVC's chemical composition. Question is would the extreme heat that our Audi engine's generate accelerate that kind of failure.
I would not like to imagine small pieces of PVC being sucked up into the intake.....

martianbooby

08-02-2011, 06:00 PM

sorry i haven't been on but i fixed a cesed brake and fixed this problem with the abs and then plasti-diped the grill I also rotated the tires

http://dl.dropbox.com/u/10732607/DSCF2913.JPG

http://dl.dropbox.com/u/10732607/DSCF2898.JPG

Has anyone seen this interior before?

http://dl.dropbox.com/u/10732607/DSCF2914.JPG

plasti dip is so awesome lol its addicting... seems like you did an awesome job spraying it... mine wasnt as smooth the first time around...
and ive seen that interior before and personally dont like it (looks like something that belongs in a rice burner for my taste)

Not to sound like the neighborhood alarmist again but if I remember correctly ( I'm familiar with PVC piping, having installed multiple septic systems, french drains and quite a few other resourceful applications )
However that elbow's wall thickness is perhaps 1/8th" whereas the next size is at least 3/16th.
I was thinking that over time PVC has a tendency to become brittle depending on the PVC's chemical composition. Question is would the extreme heat that our Audi engine's generate accelerate that kind of failure.
I would not like to imagine small pieces of PVC being sucked up into the intake.....

you dont sound like the neighborhood alarmist lol, i always appreciate some knowledge... i never knew pvc tends to fail (thought it was the "life time" solution to replace metal piping) its good to know... i was planning on going to a muffler shop and see if they can fabricate that elbow for me, but i wasnt in a hurry... now it seems like i shouldnt push it too far so yea good call...
i already had a failure at one intake camshaft and 3 lifters which almost killed my engine and took me like 2 months to fix (took my sweet time doing it) so yea i wouldnt want to even think of pvc pieces in my intake....
i wish i had a different material to work with (i couldnt find anything for the diameters im working with...)

moyenecorniche

08-03-2011, 05:21 AM

I would look into the thicker walled PVC, or there is also a certain grade of piping that has to meet much higher requirements as far as compression and other criteria's that certain code's require ( used for underground installs ) . Let me do a bit of research today, I have to go look at a new project for a client in Newport, at the same time ( today ) I have to return to the milling house and submit measurements for stair rails, newel and balusters for a Queen Anne Shingle style house. I love it, I'm busy again.....

That is 4" PVC if i guess correctly...?

McGovs2.7TB5

08-03-2011, 06:12 AM

Had new tires put on yesterday. Hankook V12s, great tires for the price, ride quiet and grip well.

Gdlaszako

08-03-2011, 08:06 AM

Hoping to fix the cruise control today

martianbooby

08-03-2011, 04:42 PM

contractor?
yup 4 inch
there was actually thicker 4 inch in homedepot but it seemed that it might not fit into the 6-4 reducer i used... but i can always try some lube... [:D]

moyenecorniche

08-03-2011, 09:03 PM

contractor?
yup 4 inch
there was actually thicker 4 inch in homedepot but it seemed that it might not fit into the 6-4 reducer i used... but i can always try some lube... [:D]

In need of a protractor....Did not get to the planned agenda today, running late for the meeting left no time for anything else, tomorrow...happens when the meeting is an hour away.

CCA4

08-03-2011, 09:17 PM

@blazsako, LOVE those seats! I've been looking for a set of sport cloth seats for quite some time. Also, PLEASE don't use the widow maker anymore, that thing terrifies me [:(]

moyenecorniche

08-04-2011, 05:01 AM

@blazsako, LOVE those seats! I've been looking for a set of sport cloth seats for quite some time. Also, PLEASE don't use the widow maker anymore, that thing terrifies me [:(]

+10...In a shop or your garage, hoist that Avant with a hydraulic floor jack. They're less than a hundred bucks at any Napa or Auto Zone, after hoisting place the car on Jack stands, another 50 or so.
for less than a $150 you will be safe.

I had the widow maker slip on me a couple years ago when attempting to change a flat. It was in January, in the middle of a snowstorm. I thought I had placed the Avant on a good spot in the driveway entrance of a closed commerce. Jacked it up, went to the back to get the spare out of the well, always fun when it's a 17x7.5 only to feel the car shifting. The shift jammed the hoist against the panel, ( gouging it ) the wheel was already off,
I had to call for service, 2 hours later (since they were overwhelmed with people who should not have been out driving) they hoisted me up and I was back on the road.
Luckily, I did not get injured, two months later, my panel got replaced when a little old man pulled into the parking space next to me and side swipped both front and rear driver's side doors. I got to watch it just as I was exiting the sandwich shop....That was an expensive lunch... ( for his insurance )

Gdlaszako

08-04-2011, 06:18 AM

+10...In a shop or your garage, hoist that Avant with a hydraulic floor jack. They're less than a hundred bucks at any Napa or Auto Zone, after hoisting place the car on Jack stands, another 50 or so.
for less than a $150 you will be safe.

I had the widow maker slip on me a couple years ago when attempting to change a flat. It was in January, in the middle of a snowstorm. I thought I had placed the Avant on a good spot in the driveway entrance of a closed commerce. Jacked it up, went to the back to get the spare out of the well, always fun when it's a 17x7.5 only to feel the car shifting. The shift jammed the hoist against the panel, ( gouging it ) the wheel was already off,
I had to call for service, 2 hours later (since they were overwhelmed with people who should not have been out driving) they hoisted me up and I was back on the road.
Luckily, I did not get injured, two months later, my panel got replaced when a little old man pulled into the parking space next to me and side swipped both front and rear driver's side doors. I got to watch it just as I was exiting the sandwich shop....That was an expensive lunch... ( for his insurance )

I actually had to change the jack to a newer one. The original had a curved bottom and we had the car up on it and it tipped. so there we were holding the car up so it wouldn't fall onto the allroad. do you know how hard it is to lift a car. While someone els puts the wheel back on?

Gdlaszako

08-04-2011, 06:21 AM

So I have to take my glove box out today for my cruise control. any tips for a speedy job?[:D]

martianbooby

08-04-2011, 06:43 AM

In need of a protractor....Did not get to the planned agenda today, running late for the meeting left no time for anything else, tomorrow...happens when the meeting is an hour away.

protractor? lol
dont we all run late for something? like right now im running late to getting me some food before my stomach beats me up ... haha

+10...In a shop or your garage, hoist that Avant with a hydraulic floor jack. They're less than a hundred bucks at any Napa or Auto Zone, after hoisting place the car on Jack stands, another 50 or so.
for less than a $150 you will be safe.

I had the widow maker slip on me a couple years ago when attempting to change a flat. It was in January, in the middle of a snowstorm. I thought I had placed the Avant on a good spot in the driveway entrance of a closed commerce. Jacked it up, went to the back to get the spare out of the well, always fun when it's a 17x7.5 only to feel the car shifting. The shift jammed the hoist against the panel, ( gouging it ) the wheel was already off,
I had to call for service, 2 hours later (since they were overwhelmed with people who should not have been out driving) they hoisted me up and I was back on the road.
Luckily, I did not get injured, two months later, my panel got replaced when a little old man pulled into the parking space next to me and side swipped both front and rear driver's side doors. I got to watch it just as I was exiting the sandwich shop....That was an expensive lunch... ( for his insurance )

i had this stupid thing drop the car almost on my face 3 times lol
i was doing the oil pan gasket and the jack kept slipping (apparently an oil soaked driveway cant grip all that good lmao) and luckily i "flew" out from under the car each time... after that i stopped being lazy went into the garage got some jack stands and my old jeep hydraulic jack lol
lesson - spidy senses are mighty useful... [:D]

patastinky

08-05-2011, 05:07 AM

http://tapatalk.com/mu/a6898a19-dcf1-5d1b.jpg

Messing around with the GoPro.

http://tapatalk.com/mu/a6898a19-dd10-e570.jpg

jaustin

08-05-2011, 03:30 PM

Did an oil change today.

Gdlaszako

08-06-2011, 09:11 AM

last night we were messing around w/ plasti-dip and well this is how it came out.

http://dl.dropbox.com/u/10732607/DSCF2923.JPG

http://dl.dropbox.com/u/10732607/DSCF2925.JPG

Ended up taking off the gas cap though

KiddEng

08-06-2011, 01:14 PM

^did you do the roof rails and window trim? if so looks good! was the masking job a pita?

BENI_BOY

08-06-2011, 06:59 PM

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/251442_10150255622220924_713880923_7733299_1224122 _n.jpg

finally threw in the motor..now time to get it runing..stock 1.8t to stage 3 2.7[evilsmile]

Gdlaszako

08-07-2011, 03:30 PM

^did you do the roof rails and window trim? if so looks good! was the masking job a pita?

No they were already like that when I got the car. but yes it does look good.

CCA4

08-08-2011, 06:11 AM

^did you do the roof rails and window trim? if so looks good! was the masking job a pita?

No they were already like that when I got the car. but yes it does look good.

B5 1.8T came with black rails and window trim stock.

Gdlaszako

08-08-2011, 08:46 AM

^ Yep

feelgood156

08-08-2011, 01:12 PM

hazMatt01

08-08-2011, 01:41 PM

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/251442_10150255622220924_713880923_7733299_1224122 _n.jpg

finally threw in the motor..now time to get it runing..stock 1.8t to stage 3 2.7[evilsmile]

Nice. Now let's see that rear bumper!

Gdlaszako

08-10-2011, 06:34 AM

I brought 180 pounds of scrap metal to the scrap yard then got a couple replacement part for the girl. just random pieces of plastic and such. Does any one here sore there Audi in
general at a scrap yard off sata fe its like the parts guy or something?
well any way look at this

http://dl.dropbox.com/u/10732607/DSCF2928.JPG

Capt. Obvious

08-10-2011, 07:26 AM

I did nothing, glorious NOTHING to my car yesterday. It's clean, running well and has new wheels finally. About damn time.

Axel-

08-10-2011, 07:39 AM

Well, not technically today, but yesterday we fitted her with the Stasis catback.

http://img.photobucket.com/albums/v487/sundance2108/rear.jpg?t=1312834309

Initially, I was scared the tips would stick out too much from pictures/videos floating out there of the same set up but I'm very happy with how it turned out!

http://img.photobucket.com/albums/v487/sundance2108/tips.jpg?t=1312834332

I went with a Magnaflow catback and now I'm stuck with the B6 single tips on a b7. I absolutely love the sound of the magnaflow but I do wish they had made a b7 version with dual tips instead of just the b6 with singles. Research on finding new tips hasn't been fruitful. Your tips looks nice.
Also installed the JHM shifter linkage and bushing while getting the downpipe installed.

Tomorrow will be intake spacers, jhm short shifter and rs4 upgraded rear sway bar. Most likely won't have time for the LWCP and snub mount.

SoCalS4Avant

08-10-2011, 08:54 AM

Well, not technically today, but yesterday we fitted her with the Stasis catback.

Initially, I was scared the tips would stick out too much from pictures/videos floating out there of the same set up but I'm very happy with how it turned out!

One of my favorite B7 S4 exhausts! Nice work. The B7 STaSIS setup was what originally led me to get mine when I heard they were in development. Believe it or not, the B6 and B7 setup doesn't sound the same! I'm still very happy with mine, though, as I have one of the original five catbacks they developed...call me a product tester.

feelgood156

08-10-2011, 03:24 PM

I went with a Magnaflow catback and now I'm stuck with the B6 single tips on a b7. I absolutely love the sound of the magnaflow but I do wish they had made a b7 version with dual tips instead of just the b6 with singles. Research on finding new tips hasn't been fruitful. Your tips looks nice.
Also installed the JHM shifter linkage and bushing while getting the downpipe installed.

Tomorrow will be intake spacers, jhm short shifter and rs4 upgraded rear sway bar. Most likely won't have time for the LWCP and snub mount.

Thanks Axel, Does your setup look weird because of the cutouts not being filled (post some pics!)? After looking at your taillights again, I decided that I really really dig them. They're added to the list :)

One of my favorite B7 S4 exhausts! Nice work. The B7 STaSIS setup was what originally led me to get mine when I heard they were in development. Believe it or not, the B6 and B7 setup doesn't sound the same! I'm still very happy with mine, though, as I have one of the original five catbacks they developed...call me a product tester.

Thanks Dan, wow you were an early adopter huh? I'm glad I'm happy with the sound since I only heard the setup through youtube vids. How long did it take for your exhaust to break in?

Gdlaszako

08-10-2011, 04:05 PM

does any one know how to fix the wiring in the hatch clip you know the one that locks the cars closed? if any one can can you fix mine please?
Please

SoCalS4Avant

08-10-2011, 04:34 PM

Thanks Dan, wow you were an early adopter huh? I'm glad I'm happy with the sound since I only heard the setup through youtube vids. How long did it take for your exhaust to break in?

I only drive about 5k miles per year...so it's hard to quantify when it exactly broke in, but I will tell you that I started considering down pipes or piggies about a year ago...which tells me it probably took less than a year. LOL

Nah, I think it settled down pretty quick, at least to my ears. I still love it when I get on it, though, and I get a lot of compliments.

dropshadow

08-10-2011, 05:02 PM

http://i.imgur.com/gyiyH.jpg

KiddEng

08-10-2011, 07:14 PM

^ APR Stealth exhaust? I have the same and love it...not obnoxiously loud.

I hope you had the end cans straightened out and aligned to fit the tips in the valence [up]

Turbwhistle

08-10-2011, 07:17 PM

I really like the bubble rap.

dropshadow

08-10-2011, 08:27 PM

Billy Boat, but same as APR Stealth, and that's just a test fit, nothing was bolted in when that photo was taken. Notice the left side being held up by a stand.

Axel-

08-11-2011, 05:40 AM

Thanks Axel, Does your setup look weird because of the cutouts not being filled (post some pics!)? After looking at your taillights again, I decided that I really really dig them. They're added to the list :)

They look even better in person :)

As for the tips, they do look a tad weird as they're more to the outside than centered in the wide gap (and even if they were centered, the wide gap is weird. Looks like I'll probably need custom tips. Something to add to the list. What probably bothers me more is the slight "rice" look to it. Bah, I'll probably have something figured out in the next month or two.

Billy Boat, but same as APR Stealth, and that's just a test fit, nothing was bolted in when that photo was taken. Notice the left side being held up by a stand.

I mated my Billy Boat with the Magnaflow for a B6 on a B7. It was short by a few inches and needed an extension (but I was expecting it as I had read about it). I love the sound of the two together.