Aggressive Wheel Thread (S3)

[jon-stuver]

https://farm2.staticflickr.com/1971/45142520554_15f6c1f927_c.jpg (https://flic.kr/p/2bM6dBU)82B5518C-5850-4D9F-B338-07436389DF0D (https://flic.kr/p/2bM6dBU) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

https://farm5.staticflickr.com/4884/44050321410_ce99910f94_c.jpg (https://flic.kr/p/2a7zpSb)6133CDF5-7A56-4A8E-971C-0B456D5FC962 (https://flic.kr/p/2a7zpSb) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

https://farm2.staticflickr.com/1955/30927771127_cfb6dac63b_c.jpg (https://flic.kr/p/P7YURe)CAB92496-F4A6-4818-A1D5-3F587DF41249 (https://flic.kr/p/P7YURe) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

https://farm5.staticflickr.com/4863/31995678108_a6f3eda8e5_c.jpg (https://flic.kr/p/QKmdoy)80406DC8-3B50-4838-A7DF-051BBCF6C64A (https://flic.kr/p/QKmdoy) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

[SMM_S3]

Should be okay with 245s. I’m on 19X9.5 et38s 245/35 Michelin Pilot Supersports and lowered on EMD springs. No rub


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Awesome, ill go with 245s then. Im hoping to have them on in a couple of weeks. Cant wait!

[S3Mike]

https://farm2.staticflickr.com/1971/45142520554_15f6c1f927_c.jpg (https://flic.kr/p/2bM6dBU)82B5518C-5850-4D9F-B338-07436389DF0D (https://flic.kr/p/2bM6dBU) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

https://farm5.staticflickr.com/4884/44050321410_ce99910f94_c.jpg (https://flic.kr/p/2a7zpSb)6133CDF5-7A56-4A8E-971C-0B456D5FC962 (https://flic.kr/p/2a7zpSb) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

https://farm2.staticflickr.com/1955/30927771127_cfb6dac63b_c.jpg (https://flic.kr/p/P7YURe)CAB92496-F4A6-4818-A1D5-3F587DF41249 (https://flic.kr/p/P7YURe) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

https://farm5.staticflickr.com/4863/31995678108_a6f3eda8e5_c.jpg (https://flic.kr/p/QKmdoy)80406DC8-3B50-4838-A7DF-051BBCF6C64A (https://flic.kr/p/QKmdoy) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on FlickrJon, what roof bars are those?


Sent from my SM-T820 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[2010A6]

Looks like the standard ones for the 8V from Audi
Jon, what roof bars are those?


Sent from my SM-T820 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Sent from my Pixel 2 XL using Tapatalk

[jon-stuver]

Jon, what roof bars are those?


Sent from my SM-T820 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Hey mike they are OEM Audi


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Mikkie]

I ordered Ispiri FFR8 wheels

20 inch
9J And offset 32
10J and offset 45

Falken FK510 tires
235/30/20 front
245/30/20 rear

Lowered on KW v1 coils.
I hope it will fit without adjustments 🤣🤣🤣 soon pictures

[Kirsigland]

Interested to see how the 20x9 +32 fits. I have a set on the way and i'll be running 20x9 +35 all around with 235/35/20's.

[Mikkie]

Wheels are arrived. Here a sneakpeak:

https://www.mypolo.nl/xenforo/attachments/img_2922-jpg.25838/

[jon-stuver]

Interested to see how the 20x9 +32 fits. I have a set on the way and i'll be running 20x9 +35 all around with 235/35/20's.

You didn’t do 235/30/20 tires?

[Kirsigland]

I ended up doing 225/35/20, I have the wheels on and the fitment is pretty flush, however the car looks like a monster truck at the moment. Once i get coilovers installed friday, I'll post some photos.

[949]

does anyone know if there are any tires with theses specs?
245/30r19?

[YMR]

https://farm2.staticflickr.com/1971/45142520554_15f6c1f927_c.jpg (https://flic.kr/p/2bM6dBU)82B5518C-5850-4D9F-B338-07436389DF0D (https://flic.kr/p/2bM6dBU) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

https://farm5.staticflickr.com/4884/44050321410_ce99910f94_c.jpg (https://flic.kr/p/2a7zpSb)6133CDF5-7A56-4A8E-971C-0B456D5FC962 (https://flic.kr/p/2a7zpSb) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

https://farm2.staticflickr.com/1955/30927771127_cfb6dac63b_c.jpg (https://flic.kr/p/P7YURe)CAB92496-F4A6-4818-A1D5-3F587DF41249 (https://flic.kr/p/P7YURe) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on Flickr

https://farm5.staticflickr.com/4863/31995678108_a6f3eda8e5_c.jpg (https://flic.kr/p/QKmdoy)80406DC8-3B50-4838-A7DF-051BBCF6C64A (https://flic.kr/p/QKmdoy) by Jon Stuver (https://www.flickr.com/photos/jstuver/), on FlickrSet up? How many inches dropped?

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[jon-stuver]

Set up? How many inches dropped?

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

H&R Super Sport Springs w/ factory mag ride

[ralphie_43]

H&R Super Sport Springs w/ factory mag rideWhats your measurement for mid fender to ground?

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[949]

Yes, wheel fitment is a little different between hatch and sedan. On the sedan, rear is more inset than front, ...

do you happen to know how many mm inset the rear is compared to the front, stock measurements of course?

[SMM_S3]

wheels are finally on!

[darbyfam]

https://farm2.staticflickr.com/1964/31297116707_c40a8beef4_z.jpg

APR 19x8.5 with eMotion springs

[richierichs3]

wheels are finally on!

Very nice[;)] Now just needs some H & R sports springs to finish it off. Oh yeah go the 76ers [:D]

[SMM_S3]

Very nice[;)] Now just needs some H & R sports springs to finish it off. Oh yeah go the 76ers [:D]

I think i may wait a while to lower it. roads in philly are terrible...and of course, trust the process

[donot521]

Which of following spec gives more flush look without rub the fender.
19 x 8.5 ET47
19 x 9 ET 35
Car is not lower, which is a better setup?
Thanks

[Paul@SupremePower]

Which of following spec gives more flush look without rub the fender.
19 x 8.5 ET47
19 x 9 ET 35
Car is not lower, which is a better setup?
Thanks

Neither is flush. 8.5 +47 sits inboard and 9 +35 pokes. If you have to choose I’d go with 8.5 +47 because Going aggressive and not lowering doesn’t look right imo.

[Spinnetti]

do you happen to know how many mm inset the rear is compared to the front, stock measurements of course?

I don't sorry. we don't get the hatch here. use a straight edge & tape measure on your rear wheel to see what room you have, then use one of the online wheel/tire fitment calculators to see what will fit. I've currently got 18x8.5 with 255/40 all around which fit fine on my sedan, lowered with front camber plates. I have a set of 18x9 ET30 that are going on next, probably with 265/35 up front and 235/40 in the back.

[marked4def]

do you happen to know how many mm inset the rear is compared to the front, stock measurements of course?

On a sedan I would guess it's somewhere between 5 and 10mm safely....it seems when people run spacers the rears end up about that much wider to sit nearly as flush as the fronts. Hatch should be fairly comparable I would think. When I was thinking of running spacers and measured I figured I would run 12.5 in front and 17.5mm in the rear....but I ended up just ordering new wheels instead.

[TechnicianB5]

I used this thread to plan out what I was going to do for fitment and figured I should share.

Miro 111 19x9.5 et40 with 235/35s

Accuair ENDO-CVT and airlift struts/springs/shocks.9713797138

[donot521]

Neither is flush. 8.5 +47 sits inboard and 9 +35 pokes. If you have to choose I’d go with 8.5 +47 because Going aggressive and not lowering doesn’t look right imo.

How tucked in will 8.5 ET 47 be?
HRE flowform is having the sale and they only offer these 2 offsets

[Paul@SupremePower]

How tucked in will 8.5 ET 47 be?
HRE flowform is having the sale and they only offer these 2 offsets

I’d say 8-10mm inside of flush.

The 19x9 +35 isn’t an official S3 fitment like the 19x8.5 +47. It’s recommended for MLBs like S4 or A6. It will certainly work on the S3 but it all depends on the look you want. They also have 19x9.5 +45.

[ralphie_43]

Would a 18x9.5 et 38 with a 265/35r18 fit on this chassis I ran 18x9 et30 with a 245/40r18 on my a3 and fit well but idk about this set up

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[donot521]

I’d say 8-10mm inside of flush.

The 19x9 +35 isn’t an official S3 fitment like the 19x8.5 +47. It’s recommended for MLBs like S4 or A6. It will certainly work on the S3 but it all depends on the look you want. They also have 19x9.5 +45.

Will 9.5 ET 45 be a better fitment? Might lower with springs in the future but certainly don't want to rub or roll the fender

[Paul@SupremePower]

Will 9.5 ET 45 be a better fitment? Might lower with springs in the future but certainly don't want to rub or roll the fender

You have pm.

[ralphie_43]

Rotiform

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[ralphie_43]

Rotiform

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Oops disregard

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[flipstah]

Just did some test fitting for the upcoming summer. Maybe -3 to take care of the poke? Thoughts?

Gotta get the lowering dialed in now.

https://imgur.com/a/trEnIS5

[Mikkie]

I got my wheels on the car!

9J 235/30/20 ET32
10J 245/30/20 ET 45 + 5 mm spacers = ET 40 .

Its rubbing but the car is very low.
Im looking for stiffer springs in de back for my KW coils
And do a little bit camber in the front. of smaller tyres.

Last solution is roll the fenders.






https://www.mypolo.nl/xenforo/attachments/7d76ff61-bc68-4d00-9745-0b221ffb241f-jpeg.25879/
https://www.mypolo.nl/xenforo/attachments/e6d8ed6b-85c7-49f6-ae2c-ce849b701706-jpeg.25880/

[CGK]

I have gone through this whole thread with no answer so hopefully someone can help.

Ordered some 19x9 ET40 wheels and Eibach Sportline springs (mild drop of 15mm approx all round) for my 2018 S3 Sedan with Mag ride.

Will 255/35/19 Michelin PS4S fit without rubbing? It seems like 245/35/19 will work, but would love to run 255/35/19.

Thanks.

[JuanPablo]

There's a post on page 18 with 19x9 et 40 and 255/35 lowerd on EMD springs. Diameter is bigger than oem , more meaty. I think Michellin P4S in 255/30 is a more safer option for that setup.

[Paul@SupremePower]

There's a post on page 18 with 19x9 et 40 and 255/35 lowerd on EMD springs. Diameter is bigger than oem , more meaty. I think Michellin P4S in 255/30 is a more safer option for that setup.

255/35 is about 13mm talller than 255/30 so larger diameter. It may need some massaging to fit properly with 9” +40.

[CGK]

There's a post on page 18 with 19x9 et 40 and 255/35 lowerd on EMD springs. Diameter is bigger than oem , more meaty. I think Michellin P4S in 255/30 is a more safer option for that setup.

I found it on page 17. Thank you. It looks awesome which is what I was after.


255/35 is about 13mm talller than 255/30 so larger diameter. It may need some massaging to fit properly with 9” +40.

What sort of massaging? Of the guard? I would prefer a 245/35 over a 255/30. I like more meat and not a fan of low profile.

[Paul@SupremePower]

I found it on page 17. Thank you. It looks awesome which is what I was after.



What sort of massaging? Of the guard? I would prefer a 245/35 over a 255/30. I like more meat and not a fan of low profile.

Depends on how low you are. Front fender liner at least. My RS3 with 245/35 19x9 +40 rubbed the fender liner. I had to modify it a little but no big deal. 255/35 would have been seriously rubbing tho.

[Spinnetti]

Depends on how low you are. Front fender liner at least. My RS3 with 245/35 19x9 +40 rubbed the fender liner. I had to modify it a little but no big deal. 255/35 would have been seriously rubbing tho.

Really? That's odd. with 18x8.5 ET35 and 255's I've got miles of room. I'm thinking I could fit 275 18x9 ET30 with a bit of camber (I'm running 034 camber plates up front)

[CGK]

There's a post on page 18 with 19x9 et 40 and 255/35 lowerd on EMD springs. Diameter is bigger than oem , more meaty. I think Michellin P4S in 255/30 is a more safer option for that setup.


Depends on how low you are. Front fender liner at least. My RS3 with 245/35 19x9 +40 rubbed the fender liner. I had to modify it a little but no big deal. 255/35 would have been seriously rubbing tho.

Definitely think that is odd. I have seen people running 19x9.5 ET38 with 245/35 on ED springs with no rubbing.

I am putting Eibach springs which are the same drop as ED springs.

I am 100% certain that 19x9 ET40 with 245/35 will work without rubbing, but not sure if 255 will work.

There is a guy who ran 19x9 ET40 with 255/35 Michelins on ED springs but he didn't say if he had any rubbing or not.

[CGK]

Really? That's odd. with 18x8.5 ET35 and 255's I've got miles of room. I'm thinking I could fit 275 18x9 ET30 with a bit of camber (I'm running 034 camber plates up front)

How much camber are you running now? and how low are you?

255/40/18 is the same diameter and width as 255/35/19 so if it works on your it will work on mine. The wheels width and offset combo puts me 1.5mm more poke than you, which is nothing considering my tyres will be more square and less rounded than yours.

[Paul@SupremePower]

Definitely think that is odd. I have seen people running 19x9.5 ET38 with 245/35 on ED springs with no rubbing.

I am putting Eibach springs which are the same drop as ED springs.

I am 100% certain that 19x9 ET40 with 245/35 will work without rubbing, but not sure if 255 will work.

There is a guy who ran 19x9 ET40 with 255/35 Michelins on ED springs but he didn't say if he had any rubbing or not.

245 on 19x9.5 will give you some stretch so you’d have more room.
I grazed the front fender liner in spots during turns. It was mainly due to the PS4S being wide and that square shoulder catching. Barely any But it was enough to bug me so I adjusted. It certainly works though.

[MerlinS3]

275’s on an 18” will fit
I’m running it on an 18x10 et35


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[ralphie_43]

245s on an 18" fit

I was running 18x9 et 30 no rub on bilstein b14 coilovers

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Spinnetti]

How much camber are you running now? and how low are you?

255/40/18 is the same diameter and width as 255/35/19 so if it works on your it will work on mine. The wheels width and offset combo puts me 1.5mm more poke than you, which is nothing considering my tyres will be more square and less rounded than yours.

034 springs, 034 camber plates. its a couple degrees negative camber and lots of room both sides. There is never rubbing under any conditions. I removed the spare and tools, but don't think that would change anything from a bump perspective. I'm actually running less than stock camber in the back (for better handling balance), and tires and wheels are square up.
I spent a bunch of time with wheel/tire calculators tonight, and I already bought wheels in 18x9 ET30, and I'll run 265/35 up front, and 245/40 in the back. This is slightly smaller diameter than stock, and slightly bigger around in the back than the front (like RS3 staggered setup). This should be about ideal (given size choices available) for the gearing and F/R balance I'm shooting for.

98680
98681

[CGK]

There's a post on page 18 with 19x9 et 40 and 255/35 lowerd on EMD springs. Diameter is bigger than oem , more meaty. I think Michellin P4S in 255/30 is a more safer option for that setup.


034 springs, 034 camber plates. its a couple degrees negative camber and lots of room both sides. There is never rubbing under any conditions. I removed the spare and tools, but don't think that would change anything from a bump perspective. I'm actually running less than stock camber in the back (for better handling balance), and tires and wheels are square up.
I spent a bunch of time with wheel/tire calculators tonight, and I already bought wheels in 18x9 ET30, and I'll run 265/35 up front, and 245/40 in the back. This is slightly smaller diameter than stock, and slightly bigger around in the back than the front (like RS3 staggered setup). This should be about ideal (given size choices available) for the gearing and F/R balance I'm shooting for.

98680
98681


Thanks mate. Appreciate all the info.

[ralphie_43]

Would an 18x9.5 et 20 and 25 work? I ran 18x9 et 30 squared on my a3 and that was flush not sure about these i'm guessing it's too aggressive looking for confirmation of fitment[emoji1362]

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Grey3]

Would an 18x9.5 et 20 and 25 work? I ran 18x9 et 30 squared on my a3 and that was flush not sure about these i'm guessing it's too aggressive looking for confirmation of fitment[emoji1362]

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)I would think that is going to be too aggressive unless you ran a super stretched tire and alot of camber. I remember one guy ran that wheel w maybe a 38et and that was about max.

Sent from my phone using Tapatalk

[Wr3ks_S3]

I run 9.5” et 38 with 245s and kiss the fender wells very slightly on big highway bumps


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[outtie_3]

Just got these installed. 19x9.5 et35 Brada CR-1. 235/35 tires with -2 degrees of camber at ride height. I really love how concave they are. https://uploads.tapatalk-cdn.com/20181227/8b69e46a1f8703e1144de961be552427.jpghttps://uploads.tapatalk-cdn.com/20181227/bd0b50a2329061d66f1aebc6d57e05e0.jpghttps://uploads.tapatalk-cdn.com/20181227/dd8b9cb0643757e2a9b49fcd638cd520.jpghttps://uploads.tapatalk-cdn.com/20181227/75de7b6ca0ffa275e3aaa611337dc4bf.jpg

Sent from my SM-N960U using Tapatalk

[Grey3]

Just got these installed. 19x9.5 et35 Brada CR-1. 235/35 tires with -2 degrees of camber at ride height. I really love how concave they are. https://uploads.tapatalk-cdn.com/20181227/8b69e46a1f8703e1144de961be552427.jpghttps://uploads.tapatalk-cdn.com/20181227/bd0b50a2329061d66f1aebc6d57e05e0.jpghttps://uploads.tapatalk-cdn.com/20181227/dd8b9cb0643757e2a9b49fcd638cd520.jpghttps://uploads.tapatalk-cdn.com/20181227/75de7b6ca0ffa275e3aaa611337dc4bf.jpg

Sent from my SM-N960U using TapatalkDefinitely super aggressive. Looks awesome. I'm assuming u are on air? What size tires u running?

Sent from my phone using Tapatalk

[outtie_3]

Definitely super aggressive. Looks awesome. I'm assuming u are on air? What size tires u running?

Sent from my phone using TapatalkYes I'm on air. Tires are 235/35/19

Sent from my SM-N960U using Tapatalk

[rex_racer]

I run 9.5” et 38 with 245s and kiss the fender wells very slightly on big highway bumps


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

What's your alignment look like, especially in the rear?

[SMM_S3]

19x9.5 994729947399474

Sent from my SM-G935F using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Wr3ks_S3]

What's your alignment look like, especially in the rear?


99537

-1.6 degrees outback



Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[rex_racer]

99537

-1.6 degrees outback


Not bad at all, thanks!

[S3_Miles]

Thought I would post my contribution

2015 S3 with 19 x 8.5, et45 Neuspeed RSe102. I run 10mm spacer rear, 5mm spacer front.

https://i.imgur.com/F7d0ABy.jpg

https://i.imgur.com/9KANp40.jpg

https://i.imgur.com/IH25qgk.jpg


Short 1/2 walkaround video to see the stance:


https://i.imgur.com/pTjaRrU.gifv

[S23brian]

101345101346101347

Work CR2P 19x8.5 +32 245/35/19 RE71R
On KW V3 with 034 front camber plate


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)101348101349

[rex_racer]

Work CR2P 19x8.5 +32 245/35/19 RE71R


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

No longer for sale?

[S23brian]

No longer for sale?

Sold the wheels already sorry man. New set of wheels coming this month


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[mtarr07]

Hello all,

Looking to see if anyone has fit a 19x8.5 ET +47 wheel with a 255/35/19 tire on their S3. Yes, a 35 ratio on a 255; I want the extra sidewall versus a 30.

I ask because I'm looking at purchasing this wheelttire package used; it was previously on a TTS.

Its looking like I'll need something like a 5mm spacer up front and 10 in the rear. Maybe a 8mm up front if 5mm isn't enough.

What I'm looking for is if someone has done this and if so, could you post a picture or note/ link where I could go see myself.

I've gone on here: https://www.wheel-size.com/calc/ and plugged in the upgraded 19 inch factory wheels from Audi at 235/35/19 with a 19x8 wheels and +49 offset. With no spacers it says that the tire will stick out 12mm farther and be 8mm closer to suspension components and that that is acceptable for most cars. The wheel itself will stick out 8mm farther and 4mm closer to suspension; the tires are the issue here so no worries with the wheels.

I'm stock ride height and will stay that way as this is my DD and I have a front lip that already scrapes on steep inclines/ declines. So rubbing on the outside of the fenders shouldn't be an issue if I need to put a small spacer to avoid touching on the inside on but at the same time I dont want the tire sticking out like crazy (I dont think it will, this isn't very aggressive at all).

[mikeyhandz]

https://uploads.tapatalk-cdn.com/20190129/bb2c7e0da302f67687278d4e8b2e3e7c.jpghttps://uploads.tapatalk-cdn.com/20190129/7ab71a55efea4c5dc8e91ef38e4c2d4b.jpg

Wheels are for sale!! AG m540 19x9.5 et40 w/ 225/35


Sent from my iPhone using Tapatalk

[Spinnetti]

Hello all,

Looking to see if anyone has fit a 19x8.5 ET +47 wheel with a 255/35/19 tire on their S3. Yes, a 35 ratio on a 255; I want the extra sidewall versus a 30.

I ask because I'm looking at purchasing this wheelttire package used; it was previously on a TTS.

Its looking like I'll need something like a 5mm spacer up front and 10 in the rear. Maybe a 8mm up front if 5mm isn't enough.

What I'm looking for is if someone has done this and if so, could you post a picture or note/ link where I could go see myself.

I've gone on here: https://www.wheel-size.com/calc/ and plugged in the upgraded 19 inch factory wheels from Audi at 235/35/19 with a 19x8 wheels and +49 offset. With no spacers it says that the tire will stick out 12mm farther and be 8mm closer to suspension components and that that is acceptable for most cars. The wheel itself will stick out 8mm farther and 4mm closer to suspension; the tires are the issue here so no worries with the wheels.

I'm stock ride height and will stay that way as this is my DD and I have a front lip that already scrapes on steep inclines/ declines. So rubbing on the outside of the fenders shouldn't be an issue if I need to put a small spacer to avoid touching on the inside on but at the same time I dont want the tire sticking out like crazy (I dont think it will, this isn't very aggressive at all).

I've got essentially the same - 255/40-18.. Fits with plenty o'-room inside and out and I've got a 35mm offset and will be putting on 265 up front next time around. On my 19's I ran 15mm spacers up front and 20mm in the back and they didn't poke at all (I don't like poke whatsoever)

[mtarr07]

I've got essentially the same - 255/40-18.. Fits with plenty o'-room inside and out and I've got a 35mm offset and will be putting on 265 up front next time around. On my 19's I ran 15mm spacers up front and 20mm in the back and they didn't poke at all (I don't like poke whatsoever)

Do you have any pictures by any chance?

So on the 255/40/18 with a 35mm offset, you're not running any spacers up front or out back?

I'm a bit tripped up when you started talking about your 19s... what size was the tires, what width was the wheel, what offset was the wheel? Because you say 15mm up front and 20mm in the rear for spacers on that setup. Any pictures of that?

Thanks again for your help.

[S3_Miles]

https://uploads.tapatalk-cdn.com/20190129/bb2c7e0da302f67687278d4e8b2e3e7c.jpg



Looks like your car's rear fender is *literally* sitting on the rear rim lip

[mikeyhandz]

Looks like your car's rear fender is *literally* sitting on the rear rim lip

https://uploads.tapatalk-cdn.com/20190130/9c06d7e3c6d8f82772471d8096989452.jpgit is [emoji23]



Sent from my iPhone using Tapatalk

[arjunS3]

Can someone let me know if this setup would work..

Looking at BBS CC-R 20x9. On tire rack, the default offset is 25mm and doing the wheel/tire package means my tire option would be 245/30ZR20 (90Y).

I could do the 20x8.5 with the 42mm offset with a 245/30ZR20 (90Y).

I have the FL S3 (2017) with no modifications and would like to do one of the two options without having to modify. Or if anyone has other suggestions, let me know!

Thanks in advance!

[Thudux]

Sold the A3 and jumped over to the SQ side

107032107033107034

[Spinnetti]

Do you have any pictures by any chance?

So on the 255/40/18 with a 35mm offset, you're not running any spacers up front or out back?

I'm a bit tripped up when you started talking about your 19s... what size was the tires, what width was the wheel, what offset was the wheel? Because you say 15mm up front and 20mm in the rear for spacers on that setup. Any pictures of that?

Thanks again for your help.

Here's the 18"s no spacers and Factory 19" with spacers

[drewedm]

https://uploads.tapatalk-cdn.com/20190310/be46e57740ae0589560e0528ec5a8b9f.jpg

[dpmotley]

Here's the 18"s no spacers and Factory 19" with spacers
What tyres are on your factory 19"? 235/35/17 or 245/35/19?

[dpmotley]

https://uploads.tapatalk-cdn.com/20190310/be46e57740ae0589560e0528ec5a8b9f.jpg
Nice car! Min me asking what tyre size you use?

[ICUDr]

Does anyone have the Niche Misano on their S3?!


Sent from my iPhone using Tapatalk Pro

[Spinnetti]

What tyres are on your factory 19"? 235/35/17 or 245/35/19?

Factory tires are 235/35-19

Drewedm... just by your picture I knew you had to be in TX.. Seems like all the houses have a certain look.

[Grey3]

Does anyone have the Niche Misano on their S3?!


Sent from my iPhone using Tapatalk ProHunterdenicola on here put them on his car awhile back in black and the look great in my opinion. https://uploads.tapatalk-cdn.com/20190311/c8b15f4af7134cc1e0eff9b73d2d637c.jpghttps://uploads.tapatalk-cdn.com/20190311/0f70c979b811b76b65509b758c63b738.jpghttps://uploads.tapatalk-cdn.com/20190311/9bad4d92e2c24116b5324a1fba54418d.jpghttps://uploads.tapatalk-cdn.com/20190311/7954fe6c047a103c575b4a6c30d7e857.jpg

Sent from my phone using Tapatalk

[hunterdenicola]

110588110589

Yah I run Niche Missions with H&R springs. Fitment is perfect for me but ride is definitely rough.

[drewedm]

Nice car! Min me asking what tyre size you use?

Thanks sir! 255/35-19 all around

[drewedm]

Factory tires are 235/35-19

Drewedm... just by your picture I knew you had to be in TX.. Seems like all the houses have a certain look.

They really do. Good guess! DFW area

[ICUDr]

110588110589

Yah I run Niche Missions with H&R springs. Fitment is perfect for me but ride is definitely rough.

Thanks for the reply.

Got a damaged wheel and for the price of an OEM wheel I can get a full set of these.

I really like the look of these wheels, specially on the gun metal grey




Sent from my iPhone using Tapatalk Pro

[Spinnetti]

Got my new wheels and tires on. Went with the RS3 stagger of 255/235 on 18x9 et30 using the widest tread I could find in that size (Generals). I've got 034 springs and front camber plates. I actually have slightly less than stock rear camber. There's a touch of poke and stretch in the back, but couldn't get the wheels in a staggered width. No rubs or bump issues. Could take 265 or 275 up front with no issue I think.

112455

[Hard-Knocks]

Got my new wheels and tires on. Went with the RS3 stagger of 255/235 on 18x9 et30 using the widest tread I could find in that size (Generals). I've got 034 springs and front camber plates. I actually have slightly less than stock rear camber. There's a touch of poke and stretch in the back, but couldn't get the wheels in a staggered width. No rubs or bump issues. Could take 265 or 275 up front with no issue I think.

112455

Looks good!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Grey3]

Got my new wheels and tires on. Went with the RS3 stagger of 255/235 on 18x9 et30 using the widest tread I could find in that size (Generals). I've got 034 springs and front camber plates. I actually have slightly less than stock rear camber. There's a touch of poke and stretch in the back, but couldn't get the wheels in a staggered width. No rubs or bump issues. Could take 265 or 275 up front with no issue I think.

112455Looks really good w black and gray. Those about those wheels myself. ECS is running a great sale on alzor right now. Like 401 for some 18s

Sent from my phone using Tapatalk

[Spinnetti]

Looks really good w black and gray. Those about those wheels myself. ECS is running a great sale on alzor right now. Like 401 for some 18s

Sent from my phone using Tapatalk

Thanks! I've run a bunch of sets of Alzors on various cars now (GLI, Bug, S3, A4) and been happy with them every time.. Great value play, strong and long lasting. I had 18x8.5 gold ones on before that were off my bug.

[AddictedToBoost]

Vossen x Work VWS-1 19x9.5 et40
Pirelli P-Zero PZ4 245/35
Bilstein B16 PSS10 - 6/10 dampening
Aggressive drop
Rubs in back. Can’t drive at limit.
MPS4S 235/35 on the way
Will dial up dampening to 8/10 to retain max drop

http://i58.photobucket.com/albums/g259/aaronegsx1/Mobile%20Uploads/62627167-D91D-41E9-837C-E928DC0DEE60_zpsmg2hvmke.jpg
http://i58.photobucket.com/albums/g259/aaronegsx1/Mobile%20Uploads/A7C7994B-B8CA-447C-A4E0-B494640ABA16_zpsbsxp0w17.jpg
http://i58.photobucket.com/albums/g259/aaronegsx1/Mobile%20Uploads/C144FC5E-F134-419E-8133-F3F7D78CEECB_zpsiz7b52sp.jpg
http://i58.photobucket.com/albums/g259/aaronegsx1/Mobile%20Uploads/D506E3EE-F2B9-4B49-995F-6B951AD05F35_zpsyjcut6m1.jpg
http://i58.photobucket.com/albums/g259/aaronegsx1/Mobile%20Uploads/B9D6E8FC-3717-4C19-836C-7723BC78FF31_zpsh4jaf8bo.jpg

Compressed while backing into driveway
http://i58.photobucket.com/albums/g259/aaronegsx1/Mobile%20Uploads/FAABB2E3-2F31-4105-9A08-A04CFF3BF1D6_zpshczr0xvz.jpg
http://i58.photobucket.com/albums/g259/aaronegsx1/Mobile%20Uploads/4784BBAD-4696-4814-9D64-1602EB13DC68_zps7vbunnha.jpg

[Shiki]

https://uploads.tapatalk-cdn.com/20190327/9f4d38b5d4d1a3d0d25a456e40a83d60.jpg

https://uploads.tapatalk-cdn.com/20190327/7050c6ee78cab94db91453e7ca470523.jpg

Enkei RPF1
18x9 ET35
Firestone Firehawk 255/35
KW V3
Slight slight slight rubbing on the track. On street nothing.


Sent from my iPhone using Tapatalk

[Gooner1886]

Anyone running Emmanuele Designs springs with 255/35s on 19x9.5 et40? Any rubbing or fitment issues with no fender modification?

[itscmac]

https://uploads.tapatalk-cdn.com/20190327/9f4d38b5d4d1a3d0d25a456e40a83d60.jpg

https://uploads.tapatalk-cdn.com/20190327/7050c6ee78cab94db91453e7ca470523.jpg

Enkei RPF1
18x9 ET35
Firestone Firehawk 255/35
KW V3
Slight slight slight rubbing on the track. On street nothing.


Sent from my iPhone using Tapatalk

This tingles my JDM senses... lol I love RPF1's... Any more pics??? [drool]

[MerlinS3]

If someone’s looking for a good aggressive figment I’m selling my 18x10 et35 Zito ZF01’s



Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[2010A6]

If someone’s looking for a good aggressive figment I’m selling my 18x10 et35 Zito ZF01’s



Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)With tires? Pm me

Sent from my Pixel 2 XL using Tapatalk

[S3_Miles]

Not terribly aggressive but putting here for reference:

2016 A3 Quattro with EMD Springs and Rear Sway Bar
Wheels: Alzor 040 - 19 x 8.5, et 35 Offset. (The centercaps were off in the pictures, but they have them)
Tires: Toyo Proxes 4 (not 4 Plus), 235/35ZR 19

https://i.imgur.com/SNpt8qh.jpg
https://i.imgur.com/ouZJY0T.jpg
https://i.imgur.com/geV2Iun.jpg

[demonmk2]

That looks good
If you wanted to flush it up, 5 mm spacers up front and 8’s on the back


Powered by Hot Boi parts

[S3_Miles]

That looks good
If you wanted to flush it up, 5 mm spacers up front and 8’s on the back


Powered by Hot Boi parts

Its flush. I was trying to show that in the picture. ET35 seems to be ideal. I did 35 from trial and error. I have Neuspeed RS102e on my 2015 S5 with ET45 offsets and run 8mm spacer up front, 10mm rear (netting ET35)

[S23brian]

114523114524114525114526114527114528

SSR SP5 in SBC coat 19x9.5 +43
245/35 Bridgestone RE71R
KW v3 suspension
@S3.Brian on Instagram if you want more pictures!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[rbish56]

how do you like those RE71R's!?

[S23brian]

how do you like those RE71R's!?

Best tires for grip [emoji14]


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[rbish56]

is it much better on launch? are you tuned?

[S23brian]

is it much better on launch? are you tuned?

Never had any tire spin on stage two and full bolt ons


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[rbish56]

wow, that is impressive!

[ST3V]

Has anyone put 19x8.5 ET35 on a S3 sedan facelift? how does this look and how much suspension drop does it allow?

[sub-zero]

Has anyone put 19x8.5 ET35 on a S3 sedan facelift? how does this look and how much suspension drop does it allow?

I run ET35 in rear no problem, I have ED Springs. In the front you will probably rub. I have ET40 in the front and it's dam close already

[kotadawg]

WHEEL MANUFACTURER : BC FORGED
WHEEL DESIGN : HCS21S
FRONT WHEEL SIZE : 19X9.5″ et40
REAR WHEEL SIZE : 19X9.5″ et40
CENTER FINISH : DARK BRUSHED BLACK
LIP FINISH : POLISHED
HARDWARE FINISH : BLACK

TIRE BRAND : MICHELIN
TIRE MODEL : PILOT SPORT 4S
FRONT TIRE SIZE : 245/35/19
REAR TIRE SIZE : 245/35/19

https://farm2.staticflickr.com/1740/42794858342_b65c7918e0_h.jpg

https://farm2.staticflickr.com/1785/42794858132_dc637602b1_h.jpg

https://farm1.staticflickr.com/883/28970450738_bedfcee231_h.jpg

https://farm2.staticflickr.com/1770/42843529691_ea342dc86a_h.jpg

https://farm1.staticflickr.com/880/28970450178_119745e9ec_h.jpg

https://farm2.staticflickr.com/1748/42843528911_afe8ce2f1e_h.jpg

Is this stock suspension height? Any rubbing? Thanks!

[S23brian]

Is this stock suspension height? Any rubbing? Thanks!

95% sure he’s on 034 springs and no rub


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[S23brian]

Has anyone put 19x8.5 ET35 on a S3 sedan facelift? how does this look and how much suspension drop does it allow?

116330
116332116333116334
First two pictures when my car was on EMD springs. Stock camber .19x8.5 +32 with 245/35 RE71R
Last two pictures on KW V3. About -2.2 degrees of camber in rear


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[kotadawg]

95% sure he’s on 034 springs and no rub



Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Thanks for the info!

[ralphie_43]

Stock 19"s with H&R 20mm spacers all around on factory magride with H&R Super Sport Springs

http://uploads.tapatalk-cdn.com/20160920/0d153ccfcdbca29c6daf1fc6f4ea3e79.jpg


Sent from my iPhone using Audizine mobile appAny rubbing?

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Jesse S.]

116330
116332116333116334
First two pictures when my car was on EMD springs. Stock camber .19x8.5 +32 with 245/35 RE71R
Last two pictures on KW V3. About -2.2 degrees of camber in rear


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

What rear diffuser is that?

[S23brian]

What rear diffuser is that?

Emmanuel Design


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[mugenr]

Thanks for the info!

Yup. that's correct. 034 springs, no rub

[c0ld]

Will APR 19x8.5 ET45 with 255/35-19 Michelin PS4S fit without rubbing on a FL S3 stock magride?

[DESPOT D S4]

118643

19x9 et35 225/35front.
19x10 et35 235/35rear.


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[darbyfam]

Will APR 19x8.5 ET45 with 255/35-19 Michelin PS4S fit without rubbing on a FL S3 stock magride?

I am running those same rims with 245/35/19s. I think there is room for the 255mm tire and others have run a 255 on this platform.

https://live.staticflickr.com/7883/32658959437_acfa583431_k.jpg

[c0ld]

I am running those same rims with 245/35/19s. I think there is room for the 255mm tire and others have run a 255 on this platform.

Dude it looks so sick can't wait to get them. Are lowered? How close are the tires to the fenders? I think the back for sure fits, front might rub?

245 looks amazing but would really like 255 for more meat, stock pirellis barely have any sidewall.

[darbyfam]

Dude it looks so sick can't wait to get them. Are lowered? How close are the tires to the fenders? I think the back for sure fits, front might rub?

245 looks amazing but would really like 255 for more meat, stock pirellis barely have any sidewall.

I am lowered on EMD springs. In that photo the rear has 5mm spacers and the front has none. I have since added 5mm spacers without issues.

[c0ld]

I am lowered on EMD springs. In that photo the rear has 5mm spacers and the front has none. I have since added 5mm spacers without issues.

No rubbing at all then?

[darbyfam]

No rubbing at all then?

Never and I live in New Orleans with HORRIBLE streets.

[s3dro]

19 x 8.5 Konig's, wrapped in Hankook Ventus V12 Evo 2's - 245/35/19

https://i44.photobucket.com/albums/f18/Beanerbum/pic%201.jpg (https://s44.photobucket.com/user/Beanerbum/media/pic%201.jpg.html)

https://i44.photobucket.com/albums/f18/Beanerbum/AUDI%20S3.jpg (http://s44.photobucket.com/user/Beanerbum/media/AUDI%20S3.jpg.html)

[dpmotley]

19 x 8.5 Konig's, wrapped in Hankook Ventus V12 Evo 2's - 245/35/19

https://i44.photobucket.com/albums/f18/Beanerbum/pic%201.jpg (https://s44.photobucket.com/user/Beanerbum/media/pic%201.jpg.html)

https://i44.photobucket.com/albums/f18/Beanerbum/AUDI%20S3.jpg (http://s44.photobucket.com/user/Beanerbum/media/AUDI%20S3.jpg.html)Looks good :) What offset?

Sent from my LM-G710 using Tapatalk

[dcohen5]

116330
116332116333116334
First two pictures when my car was on EMD springs. Stock camber .19x8.5 +32 with 245/35 RE71R
Last two pictures on KW V3. About -2.2 degrees of camber in rear


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Are those Yokohama AD08r's?

[s3dro]

Looks good :) What offset?

Sent from my LM-G710 using Tapatalk

Thanks! I feel like they go very well with the color of the car. They are +45

[:)]

[c0ld]

Never and I live in New Orleans with HORRIBLE streets.

Thank you so much for the input I am gonna go with 255/35-19 then. One last question do you have magride?

[darbyfam]

I do not.

[2010A6]

Stock black optic wheels
19x8
235/35/19* ET49

EMD springs
10mm spacer front
12.5mm spacer rear

https://uploads.tapatalk-cdn.com/20190505/7a80f3d3a758d9c4484f3302101c4f20.jpghttps://uploads.tapatalk-cdn.com/20190505/63c7592569848a49a8c02dabb7ade223.jpg

Sent from my Pixel 2 XL using Tapatalk

[B7OrangeA4]

119330119331

BBS CHR 19 x 8.5 et 40

245/35/19

Not super aggressive but I’m happy with it

[markn1689]

118643

19x9 et35 225/35front.
19x10 et35 235/35rear.


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

naruto fan?https://otakukart.com/animeblog/wp-content/uploads/2017/02/akatsuki_2_0_by_odinforce23-da4qnwa.jpg

[DESPOT D S4]

naruto fan?https://otakukart.com/animeblog/wp-content/uploads/2017/02/akatsuki_2_0_by_odinforce23-da4qnwa.jpg

Haha. Just a little.

[bxultra]

After a few days of browsing this thread, I’m getting ready to pull the trigger on some 19x8.5 +35 CB 66.6, (needing rings) wrapped in Michelin Pilot Sports 245/35. I was looking for some input as to if one should do suspension first then wheels or vise versa. I’m leaning more towards coils in that aspect but springs seem to do the job well on many s3’s but not so sure about the a3. Btw Im new to suspension so I’m unsure of the order of operations of these things haha


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[XLR8 Erik]

After a few days of browsing this thread, I’m getting ready to pull the trigger on some 19x8.5 +35 CB 66.6, (needing rings) wrapped in Michelin Pilot Sports 245/35. I was looking for some input as to if one should do suspension first then wheels or vise versa. I’m leaning more towards coils in that aspect but springs seem to do the job well on many s3’s but not so sure about the a3. Btw Im new to suspension so I’m unsure of the order of operations of these things haha


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Suspension is always a good start, depending on your budget there are options to fit you needs. If you are looking for an entry level setup I would recommend either ST Coilover's (https://xlr8performance.com/i-35526-st-coilover-kit.html?ref=category:102) or KW V1 Coilover's (https://xlr8performance.com/i-30290-kw-automotive-kw-coilover-kit-v1-2015-audi-s3-quattro-8v-with-irs.html?ref=category:102).

Feel free to send me PM with any questions and I would be happy to help.

[dpmotley]

A question to folks with 245/35/19 tyres. Does your speedometre show the real speed? I'm on a 225/40/18 wheels and my speedometre shows 2 km/t more than GPS does and this difference increases with speed (3-4 km/t at 90-100 km/t). Does your speedometer show the same speed as the GPS?

[949]

A question to folks with 245/35/19 tyres. Does your speedometre show the real speed? I'm on a 225/40/18 wheels and my speedometre shows 2 km/t more than GPS does and this difference increases with speed (3-4 km/t at 90-100 km/t). Does your speedometer show the same speed as the GPS?

mine shows incorrectly even with my stock car. dealership says if its within +/- 3% of actual they wont do anything. the mistake is never on our side [:|], it never shows under but will show over. so as you add miles your going to show more than its actually driven. oh well.

[dpmotley]

mine shows incorrectly even with my stock car. dealership says if its within +/- 3% of actual they wont do anything. the mistake is never on our side [:|], it never shows under but will show over. so as you add miles your going to show more than its actually driven. oh well.
Yeah, I know the reason to why they do it. They don't want to be sued for every speeding ticket. My question was if you increased the wheel circumference with bigger wheels, for instance 245/35/19 instead of 235/35/19 or 225/40/18, the speedo would show a speed closer to the real one. Does yours?

[949]

Yeah, I know the reason to why they do it. They don't want to be sued for every speeding ticket. My question was if you increased the wheel circumference with bigger wheels, for instance 245/35/19 instead of 235/35/19 or 225/40/18, the speedo would show a speed closer to the real one. Does yours?

i see. sorry i cant be more help with the actual wheel question you have. havent experienced this yet.

i did once find the option in vcds to calibrate the speedo when the mnfg changes the wheel circumference. just cant change it. probably need the right security code or procedure. at times certain changes require some constraint to be met before changing an option. you can definitely find the option in there for wheel circum, they didnt hide it. as it makes sense when there are a few different options for wheels from the audi.

[EROtero]

new summer wheelset...
Advan Racing TC-4 18x8.5 et45
Bridgestone Potenza RE760 Sport 255/40/r18
12mm BFI spacers all around
Tight fit super flush, no rub in front but some in the rear only when vehicle is forced downwards abruptly (going over large speed bumps faster than necessary). Will get some 10mm spacers for the rear this week and try again.

120493120492120491120490120489

[Spinnetti]

new summer wheelset...
Advan Racing TC-4 18x8.5 et45
Bridgestone Potenza RE760 Sport 255/40/r18
12mm BFI spacers all around
Tight fit super flush, no rub in front but some in the rear only when vehicle is forced downwards abruptly (going over large speed bumps faster than necessary). Will get some 10mm spacers for the rear this week and try again.

120493120492120491120490120489

That's odd- doesn't look flush, looks like the rims stick out an inch from the bodywork (not the tire). I'm running 18x9 ET30 with 255 and don't have that kind of poke. Didn't think my camber plates made that much difference. BTW, 255/40 is a taller tire than stock - was that on purpose? (I ran that same size before the current set as they were takeoffs from my bug)

[Grey3]

That's alotta tire....love the wheels though

Sent from my phone using Tapatalk

[ralphie_43]

That's odd- doesn't look flush, looks like the rims stick out an inch from the bodywork (not the tire). I'm running 18x9 ET30 with 255 and don't have that kind of poke. Didn't think my camber plates made that much difference. BTW, 255/40 is a taller tire than stock - was that on purpose? (I ran that same size before the current set as they were takeoffs from my bug)+1 I ran 18x9 et30 245/40r18 on my 15 A3 Quattro and didn't have that kind of poke. Mine was very flush, I didn't run camber plates.120847120848

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[coolwater]

Vmr V810 19x9.5 et40, 245-35 R19.

https://youtu.be/MOglyI9vVKg

-cW

Sent from my SM-G965U using Tapatalk

[Spinnetti]

+1 I ran 18x9 et30 245/40r18 on my 15 A3 Quattro and didn't have that kind of poke. Mine was very flush, I didn't run camber plates.120847120848

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Ha.. running those same wheels on my S3 with 255/35. They are slightly smaller diameter than stock which helps acceleration.

\120942

[949]

That's alotta tire....love the wheels though

Sent from my phone using Tapatalk

+1

but he might have bad roads where he is at.

[EROtero]

That's odd- doesn't look flush, looks like the rims stick out an inch from the bodywork (not the tire). I'm running 18x9 ET30 with 255 and don't have that kind of poke. Didn't think my camber plates made that much difference. BTW, 255/40 is a taller tire than stock - was that on purpose? (I ran that same size before the current set as they were takeoffs from my bug)

Wheel is flush but tire sticks out about ⅛". I will have alignment done on Friday and the 10mm spacers are coming on Friday as well. I will take a picture of the car from behind to show the wheel flush soon and post it here.

As for tire size, I really wanted 255/35 but the 255/40 were half price on clearance and I couldn't pass on that. Next tire change I am definitely going either 255/35 or 245/40 do not to rub at all.

[EROtero]

+1

but he might have bad roads where is at.

Columbus, OH... so yeah roads here are not the autobahn for sure, specially after winter season.

[949]

+1 I ran 18x9 et30 245/40r18 on my 15 A3 Quattro and didn't have that kind of poke. Mine was very flush, I didn't run camber plates.120847120848

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

can you post more photos from different angles. maybe even some with up close angles. very curious about the 18 inches

[ralphie_43]

can you post more photos from different angles. maybe even some with up close angles. very curious about the 18 inchesI have this one I'll have to find my other sd card that has other. Cant take new ones as I no longer have that car 121071

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[ralphie_43]

Will 18x9.5 et 35 255/35 fit on an s3 lowered on h&r super sport springs?

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Spinnetti]

Will 18x9.5 et 35 255/35 fit on an s3 lowered on h&r super sport springs?

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

It might, but I don't think I'd try it without camber plates up front. 9.5 is wider than optimal for 255 though.

[ralphie_43]

It might, but I don't think I'd try it without camber plates up front. 9.5 is wider than optimal for 255 though.I was thinking 265 but i don't want it to not fit

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Spinnetti]

I was thinking 265 but i don't want it to not fit

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Put on some camber plates (I'm using 034) and will be plenty of room for 265.. Pretty sure 275 will fit with room to spare on 9" ET30 which should be similar to 9.5 ET35

[EROtero]

Still with 12mm spacers and no alignment. We'll see after alignment if I go with the 10mm spacers or not.

121207121206121205

[sub-zero]

https://i.imgur.com/l1KRkCJ.jpg
19x8.5 +40mm with 5mm spacer on rear. Pilot Sport 4S 235/35/19, ED Springs, No Mag Ride

[unitzero]

https://uploads.tapatalk-cdn.com/20190521/c7d47c87ec503da008a4d907c9ca3d4b.jpg

https://uploads.tapatalk-cdn.com/20190521/2b96ac46896b8a35c4574ba5807997a2.jpg

https://uploads.tapatalk-cdn.com/20190521/1eacecf783d80c1663dd8d0e13b51914.jpg

OEM
SPEEDLINE / BBS
19x9J ET32 225/35

A little too aggressive for my low static set up here IMHO


Sent from my iPhone using Tapatalk

[ralphie_43]

It is. Guess we'll see when I lower it. If they contact a tiny bit, I'll roll the stock ones until i find another wheel

http://uploads.tapatalk-cdn.com/20160224/475fcb513e40b00c93f2a6e6b2fdff68.jpg
http://uploads.tapatalk-cdn.com/20160224/dd40c5c08198cfbf2f90bbc14c231c55.jpg



Sent from my iPhone using TapatalkDid you ever experience any rubbing at all? Looking into a set of 18x9.5 et 35

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[s3dro]

https://i.imgur.com/l1KRkCJ.jpg
19x8.5 +40mm with 5mm spacer on rear. Pilot Sport 4S 235/35/19, ED Springs, No Mag Ride

Hooollllyyyyy shit, that looks good![drool] Nice job!

[S23brian]

Are those Yokohama AD08r's?

Bridgestone RE71R


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[ralphie_43]

No rub 19x9.5ET40 w/ 245/35/19.
http://uploads.tapatalk-cdn.com/20161120/7f35ab9d755707aca71bdd7e8845d14b.jpg




Sent from my iPhone using TapatalkWhat springs?

Sent from my SM-G930V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[naudinate]

Just an A3, 18x9 et35 245/35/18https://uploads.tapatalk-cdn.com/20190529/0846d85921ee10b68b209d81e2c451e3.jpg

[Grey3]

Just an A3, 18x9 et35 245/35/18https://uploads.tapatalk-cdn.com/20190529/0846d85921ee10b68b209d81e2c451e3.jpgNice wheels. What kind are they?

Sent from my phone using Tapatalk

[naudinate]

Nice wheels. What kind are they?

Sent from my phone using Tapatalk

Enkei PF01

[sub-zero]

Hooollllyyyyy shit, that looks good![drool] Nice job!

Thanks! Just a bunch of subtle mods [:D]

[Hard-Knocks]

Switched out the OEM rims with BC Forged RS41s (19x8.5 ET 42). No spacers and on OEM mag ride. Tires are Michelin Pilot Sports 4S (235/35/19).

[949]

Just an A3, 18x9 et35 245/35/18https://uploads.tapatalk-cdn.com/20190529/0846d85921ee10b68b209d81e2c451e3.jpg

can you take more photos from different angles. this is the closest to what im thinking of doing but with et25. so im very curious if the wheels look too small and do they pop out too much?

[naudinate]

can you take more photos from different angles. this is the closest to what im thinking of doing but with et25. so im very curious if the wheels look too small and do they pop out too much?

Et25?! With what width of wheel?https://uploads.tapatalk-cdn.com/20190603/eb3a905881ebb0f54ea3669209114c2d.jpghttps://uploads.tapatalk-cdn.com/20190603/e1558c0f824992684349498f929714f3.jpghttps://uploads.tapatalk-cdn.com/20190603/8c31bd44cc3d3f6dfbcbf6a2b6fbead8.jpg

[949]

thanks for the pics. im still doing a lot more researching for now.

et25 was not my first choice as i would prefer to do et35 on a 9inch width which is about 0.40 inches movement. its not a huge difference but any amount will still help bring it back under the fender and be more compliant with daily driving.
the wheel im looking into only has et49 or et25 (has a deeper look) for that deep concavity appearance. there are some tricks i know of that will bring that back into alignment but it can only go so far.

[naudinate]

thanks for the pics. im still doing a lot more researching for now.

et25 was not my first choice as i would prefer to do et35 on a 9inch width which is about 0.40 inches movement. its not a huge difference but any amount will still help bring it back under the fender and be more compliant with daily driving.
the wheel im looking into only has et49 or et25 (has a deeper look) for that deep concavity appearance. there are some tricks i know of that will bring that back into alignment but it can only go so far.

It won’t fit! I am running -3° up front and -1° out back for track purposes. Et25 will Be way out of the fender. Unless you wanna look like those honda boys with massive camber.


Sent from my iPhone using Tapatalk

[949]

that bad huh. dang. the front i can bring 1 inch but the back is gonna be harder to work on.

[Auditree]

Hi!! I bought a new set of wheels for my 2016 A3 and wonders if a 19x8.5 et35 running on 245/35/19 tires set up would be safe with no rubbing; wants to be sure it’s good to go before I bring it in for powder coating. I don’t really want to roll or do any modifications. Just looking for that clean fitment with a little poke from the fenders. Also planning to lower the car as well. I have a few options but don’t know if I should go coilovers (if so what coilovers would you recommend for a reasonable price) or lowering springs (EMD, H&R, or Eibach). And would I rub if I lower the car?

[Tap053]

At stock ride height ('17 sedan) can I run 19x8.5+32 with 245/35r19s with no rubbing & no fender mods.?

[stevwang]

At stock ride height ('17 sedan) can I run 19x8.5+32 with 245/35r19s with no rubbing & no fender mods.?Yes.


Sent from my LM-G710 using Tapatalk

[Tap053]

Yes.


Sent from my LM-G710 using TapatalkThanks for the fast reply [emoji106]

[Paul@SupremePower]

At stock ride height ('17 sedan) can I run 19x8.5+32 with 245/35r19s with no rubbing & no fender mods.?

Stock height yes. Be careful if you ever lower it tho. Depending on the tire brand and ride height it could rub.

[Tap053]

Stock height yes. Be careful if you ever lower it tho. Depending on the tire brand and ride height it could rub.I'm between

BBS CH-Rs @ 19x8.5+40
&
TSW Nurburgrings @ 19x8.5+32

Being that I'd like to run a 245 tire I want to make the safe play with the BBSs but I like the design and light weight of the TSWs; on the other hand I definitely see subtle lowering in my future so I'm thinking play it safe with the +40s and maybe throw some spacers in if I want them more aggressive...
🤦🏻

[Chaoscreature]

I'm between

BBS CH-Rs @ 19x8.5+40
&
TSW Nurburgrings @ 19x8.5+32

The Nurburgring is a fantastic looking wheel IMO. If I had the budget, Nurburgring's in a 17x8 would be on my car already :)

[Paul@SupremePower]

I'm between

BBS CH-Rs @ 19x8.5+40
&
TSW Nurburgrings @ 19x8.5+32

Being that I'd like to run a 245 tire I want to make the safe play with the BBSs but I like the design and light weight of the TSWs; on the other hand I definitely see subtle lowering in my future so I'm thinking play it safe with the +40s and maybe throw some spacers in if I want them more aggressive...
🤦🏻

I love the CH-R. That’s be my choice.

[Auditree]

Does anyone know which spacers to run on the rear? I’m going 19x8.5 et35 with 245/35/19 tires and the front pokes out more than rear but I want that even flush look to match the front.

[billk1967]

Does anyone know which spacers to run on the rear? I’m going 19x8.5 et35 with 245/35/19 tires and the front pokes out more than rear but I want that even flush look to match the front.

ECS OEM wheel flush kit for S3's has a 10mm spacer for the front and a 17.5mm for the back so based on this I would say a 7.5mm spacer should do the trick if you are running a square setup all the way around.

[ZeroMech63]

Been checking several pages before and still not 100% clear on how flush this fitment would be. This whole offset thing is almost like algebra. Im lowered on normal H&Rs with mag ride. Trying to run flush with 245 and 255s in the back.

SIZE: Front:19x8.5,Rear:19x9.5

OFFSET: Front:+45mm,Rear:+48mm

[MerlinS3]

Just throwing it out for anyone wanting aggressive fitment.

My 18x10 et35 Zito ZF01 are still for sale/trade for stock S/RS3 wheels in San Antonio!



Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Gberg888]

19x9.5 Et45 with a 265/35/19 tire?

Will they fit?

[Paul@SupremePower]

Been checking several pages before and still not 100% clear on how flush this fitment would be. This whole offset thing is almost like algebra. Im lowered on normal H&Rs with mag ride. Trying to run flush with 245 and 255s in the back.

SIZE: Front:19x8.5,Rear:19x9.5

OFFSET: Front:+45mm,Rear:+48mm

Rear would be flush. Front would sit 10mm more inboard compared to the front. Not a good match imo.

You’d be better off doing 9.5 +48 square

[ZeroMech63]

Rear would be flush. Front would sit 10mm more inboard compared to the front. Not a good match imo.

You’d be better off doing 9.5 +48 squareI already have 10mm spacer if that's all it needs to be flush. So with the set up you're talking about would I be able to get away with 255 all around? Plus I thought the front needs less offset then rear.

Sent from my SM-G950U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Gberg888]

19x9.5 Et45 with a 265/35/19 tire?

Will they fit?

[Grey3]

19x9.5 Et45 with a 265/35/19 tire?

Will they fit?265 may be too large...stock sport suspension?

Sent from my phone using Tapatalk

[Gberg888]

Stock for now...

When I get the car ill test fit. Worst case, the tires that come on the car can be swapped over hopefully.

[OnionKnight]

Can stock wheels be aggressive if they're painted?

https://i.imgur.com/lQnaoCV.jpg

[Paul@SupremePower]

I already have 10mm spacer if that's all it needs to be flush. So with the set up you're talking about would I be able to get away with 255 all around? Plus I thought the front needs less offset then rear.

Sent from my SM-G950U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

You could use a spacer up front I suppose but The 19x9.5 +48 square would give you a close to flush stance without one. 255/30 would work. Fronts can go a little lower on the offset to fill the fender better...maybe 3mm. But that’s definitely not what you had with 19x8.5 +45 on 245 front with 19x9.5 +48 on 255 rear. Besides, staggering the widths on Audi’s like that doesn’t help performance. They tend to be nose heavy as it is and doing it like that will only increase understeer.

Your best bet is to go square in wheel and tire width.

Side note, double check inner clearance to the strut in the rear. 9.5 at +48 could be an issue.
You may need to come down to +45 to clear it.

[dpmotley]

Can stock wheels be aggressive if they're painted?

https://i.imgur.com/lQnaoCV.jpg
Sure they can :) Just lower your car and add spacers, so everything is flush or a little poking ;) I guess "aggressive wheels" means the wheels are as close to the fender a possible, with just a little gap enough to avoid rubbing.

Your ride looks great, btw.

[stevons84]

Hi All

Does anyone know or has put 20x9.5 et 35 on their S3 preferably a saloon. fancy the new ISPIRI FFP1, They only do 8.5j or 9.5j .no 9j unfortunately.
Any help will be greatly received.

[MadMr2]

Thanks to all the great info in this thread! [:)]

I went with 3SDM Style .01 19x9.5 Et40 with red center caps. I'm really happy with how it turned out. I had almost brand new 235 tires on the car so I've kept them but I'll step up to 245 when they are done... 0 rubbing but on stock height.

[jleclercz31]

Rays Gram Lights 57DR 18x9.5 +38 Gun Blue 2 redrilled from 5x114.3 to 5x112 by FM wheels in California. Tires are 265/35/18.


https://uploads.tapatalk-cdn.com/20190724/c9ae04ff7f492023671fcae49310906c.jpghttps://uploads.tapatalk-cdn.com/20190724/52affdd5f85033c6ff71d3c774d82651.jpghttps://uploads.tapatalk-cdn.com/20190724/c598c82110c03c13d3a44830a67ae36b.jpg


Sent from my iPhone using Tapatalk

[949]

034 springs, 034 camber plates. its a couple degrees negative camber and lots of room both sides. There is never rubbing under any conditions. I removed the spare and tools, but don't think that would change anything from a bump perspective. I'm actually running less than stock camber in the back (for better handling balance), and tires and wheels are square up.
I spent a bunch of time with wheel/tire calculators tonight, and I already bought wheels in 18x9 ET30, and I'll run 265/35 up front, and 245/40 in the back. This is slightly smaller diameter than stock, and slightly bigger around in the back than the front (like RS3 staggered setup). This should be about ideal (given size choices available) for the gearing and F/R balance I'm shooting for.

98680
98681

is this the wheels that are 18x9 et30?

[markn1689]

[QUOTE=OnionKnight;13736557]Can stock wheels be aggressive if they're painted?


Depends on your definition of aggressive. A lot of people put expensive clown wheels on their car and consider it aggressive. Most of the time their cool new aggressive wheels actually weigh more and perform worse than oem- is that aggressive?

Do what you like. But in my opinion “aggressive” has a very different meaning in this thread.

[Spinnetti]

is this the wheels that are 18x9 et30?

No, those are 18x8.5 ET35 with 255/40 (taller than stock) tires.

[Spinnetti]

[QUOTE=OnionKnight;13736557]Can stock wheels be aggressive if they're painted?


Depends on your definition of aggressive. A lot of people put expensive clown wheels on their car and consider it aggressive. Most of the time their cool new aggressive wheels actually weigh more and perform worse than oem- is that aggressive?

Do what you like. But in my opinion “aggressive” has a very different meaning in this thread.

In this context, "aggressive" simply means "will it fit" not "will it perform better". If everybody wanted performance, we'd all be running 17" wheels on slicks.

[3y3scream]

19 * 8.5 ET34 + Eibach pro kit

https://lh3.googleusercontent.com/mUApiAvBTowYXXOCx7jZhfdcZcUunC1U-OBDv31mazVOVt3LNwZ7aXRGmyrFMSSVn9lc4XJ6h2DCK5vnEDL he7jjhzb4gmtG0gbEgkcrHpXFV-Bomd3BHeGwzRf5nXRfCUet_7WTNbeDV95dJkJAGYQSEq6caK3A g7jYg3usU5q--2XMCgMh1eWqNQnUjy7nCzuJht2NNQirHyACuh57pzBnasesoy_ dstwrO6-QugXL-STk4SgWJXnRrPgjgDsQ0jYi-1Np2KH3gXJjkiOi-GoZs48Rvtp0nWP0b-kUjH_YO3S7cDCMxVjRc5ua-8tbs5-dW7jo-wwNDo4QdegGjJMhePhFFaxHVcYgoWp9sbKoslrvTSz3udWCzha __lcisgJl6DXKeMSsXbvN72-KzGlu3kBvpQD2pHZfSKKgMcqx89lXnhqXx_qPs7vSlGBkxR0Uh-Qsa_Q8xu-gGqlaiWdQlhsi_dansHYM4Wo-CTYws6bgHPwsH_YNQhbijLb5dI3OCydQGal4jSCtIKd5HXu1tE pzQyRBLAwljS_GFINzxeL8o_WL8gvskeBxCqI_YFzVKijinEme yKD-bUQ4DXnSzbTPPhrZf7IzKj2Cp1W-UTuiObAZozpnemd3BRd8ePSPjfrQECIxC4AtdLK5AtbSTo8_DY w1nByaTRrsXAywi83wNiYF3voaqGp5CjnX5pJrUiO0MJO72rqS WzDokZCHuQ=w438-h657-nohttps://lh3.googleusercontent.com/9_zzi5jFlTUnDl6w50FoB7pbF9MpEJSWDKJxJOdUrUUwLCpIUJ koIGNVH9dLAVmqLOwIYsmCYtNB95mDqTF9c7iIVprvQjBuKnDy 8ewADj3KNU8YbMM8f3FnFP1XUiKII6UZMrIpfnIPbN4kSQ5HUU yc4AaVUP8GtBxApNT9SDQ4q5rE_lECsPq7ZZrGQ1RU5S52oZxo uoM66yhGAkvGcfxqC4iCX6932e2c1oNuM3SQuAjnHZYmaHW4B7 NYZ007eidy0yboE49BQ8wr7BJE6qwn4O7aRH1DtmzmNjdtBGlU 1nTKQmaw-AFgp__YWBaCTASiQ5HfUAD-K_Q3xS3cBQ32PqDq7ZMKCBJEnAx2xdEArzto7c4qpiDpTatdSW JQjqWttQSnhMMP8Ds2V4mjXItCSkl3NgJFVRWePfc0CwRB8KXt Dy4UBsJXe0mdATv3CH1Oqh12vu_eJHbr4q90kpqsCk7EGzbDaM 0rEb3_encQuvHOh8-eNfnHeVrSejqD-fCJ80J5sBiEhfkWtuSWKeQ7G9b92BeTp-tePeVk-5JcGG1jQ_AZc9SRcHmNJ6zkbC6Ms64j7e7N5HHC4bOlvag7CVZ C4v9SNAc56OK7GlWSwlG9yufNODw8fhp6CX1h7PGKtISZc65N9 L4fSwo3rRPdzh2_SqyeUxoBRUq-IJTVlhSlOR-sdnyrxxpbJwjBU5b6BUgDDCk72Kfy06fldDnGcw=w439-h657-nohttps://lh3.googleusercontent.com/wH-zU7yPC_ZFEUP3nZkevzkbk2PV3NiTElm02pGrmz6AYFVb5wzas ZOBz1TnQslt88a_izWx-rMiDWDNlPyvm2XQWWF6EBq6kaKj35Qr7nshD1MXyWAsDzI1E8i SayOdaIreQG6h51UG4eEKdqNcKAwiiB5gzlgm3oSdPrg9sp1G7 ejlCvRuT1aOYPTwVrqNbfb8PXva3pX6RCB-xxMv8QpxKrsDTnYjN2vuLFXITjzAZWj83MxEMJwLledxXW9-k_6qWn8O0nsGXNSS4pM9W3tLRGnEFZ10h4ukTX3vIeEh_xwThG f-tAFA1SSZbdQBH_v0p7_74Lp1HoY6L6zW6Nrpol2kjMsS5ryQn2 oTwDjkTKAm1_MGyGnNAWV5ZXtuJ3DeSciorWcMI62u2eVS5r0W dE61C9jeRWF-tAWtWbWMfQ1GcoMfrK4X6sH9TH_f-Vz6hl_nBV6f61bmRyqhRmV3aGajLcIj3lCTpGplI1lLAIxhWWa CxRjqBkL1TNBh9t0Is53-MI7-_et14K1VuwLx2hm1PAo6SrkONdAIJ7NHBPj8Y5Hd79iwxOSOHg WVs_aJCLHymu5gUF_7l7gFIjeKqbQFpenAx4q4Gd_4DgqPE4ex fTeoZvfkV9YBqZ1jbr0mLrwdtkYS-0nVYN9NxUPoEvZmbhXdNXJBL-yGqOP6IB8ToPjszQs-fqE2OtwKNyv-7vKtcICkmEjlJjZr4yU8qw=w439-h657-nohttps://lh3.googleusercontent.com/LcZy6m6-jUqFYc5Wb3mJwS9hqlL0AqXt3UaMSlJQ0JBZFaBCmOQEFdhO2O EG2zZJfzMlug8oG33lnJdmR2us1AoaXHAJdb3a-BXlbmJk3B3vQFSAXyYuy1VQPv1Bgp7bjWut8sfLX5DyFq769Zg 8RqxWzwPxN2JRMSXVFIDvE-U6X91a7yS7JC-nXWcJIANcdiyxJ6yv_5LrjBM35tcG1tG8NKTUEOa1HPD6gRX8w HYrRSZZTl3EOeZ6QSU8qPbUFqLSpdKywfJAyhpEKaV9ZLXydB6 EfWaaw6rRYmpNYvGpjaXW0Bn_POCBgx0NifTt_J_KWmboQ5IsM RmbKPxOBQR0u3Ups_Pf3AND9-Lz1ke-LzaqZ18lNEPCM-uwbJOrbJf4jJHwsjpwUC4hyXRNqbSDaaMrkpa6Ur6xKwZsjvls _-_YAE3nHJQ4tuNvlyUpH11sAQ4acvOA97cnTketkcam1x0D8AQu DpumforXWnM7m6ArikuWizCefHA3xSaexIYieb_Oycti1nMVMB CV0Nozx6bcAkFNG9TZVCMVD1APN7_QdtME8Jqg9Y9FELz1yfQf 52eOhLd2Lip2ah-UYDRhC_75WjImHO4onvQCkU1XbA9qPsvdru8Oethmik7_5LuFs 4-Yr10eo58GW_1UObPKL0iOXjaSzO6mrhPll8MiQXOJdhVSoRkDj Q9Lv7FcuMq4K6pgxQOKIArE9Mz5CDEY8g=w439-h657-no

[Dudemans4]

18x9.5 et 35 Cosmis Racing Wheels 245 40 18
136275136286

[Dubstro]

18x9.5 et 35 Cosmis Racing Wheels 245 40 18
136275136286

[o_o] I'm no expert but that engine bay pic doesn't look stage 2 to me!

[949]

18x9.5 et 35 Cosmis Racing Wheels 245 40 18
136275136286

nice wheel setup. i like your stance the best also with the right wheel specs.

is there a lot of poke? did you have to camber it a lot to get it under there?

[PoonFlavordTang]

20x9 245/30r20

https://i.imgur.com/iLJcFZN.jpg

https://imgur.com/a/S2DqsnD

https://imgur.com/a/5eAEOT8

https://imgur.com/a/WgBQbii

[billk1967]

20x9 245/30r20

https://i.imgur.com/iLJcFZN.jpg

https://imgur.com/a/S2DqsnD

https://imgur.com/a/5eAEOT8

https://imgur.com/a/WgBQbii

Very nice! Is that stock suspension or are you lowered? Also, can you provide the offsets for the wheels as I was looking to go 20's and like this setup. BTW, may I suggest wrapping the wing black, plastidipping the emblems black (or changing them out with black) and either taking off the chrome tip covers and having them powder coated black or changing the tips to black (this is what I just did on mine). That would compliment the black optics package even more and IMO make your car even more attractive than it is already.

[billk1967]

Can someone explain why people post pics of their cars and have no center caps on their wheels?
Thanks

Which pic are you referring to?

[PoonFlavordTang]

Very nice! Is that stock suspension or are you lowered? Also, can you provide the offsets for the wheels as I was looking to go 20's and like this setup. BTW, may I suggest wrapping the wing black, plastidipping the emblems black (or changing them out with black) and either taking off the chrome tip covers and having them powder coated black or changing the tips to black (this is what I just did on mine). That would compliment the black optics package even more and IMO make your car even more attractive than it is already.

I'm on stock suspension for now. That's the ext upgrade though. They are et36

[billk1967]

I'm on stock suspension for now. That's the ext upgrade though. They are et36
Excellent news as I am also on stock suspension. Now I can confidently start looking for similar specs knowing what the outcome will yield.

[Bayy613]

Just picked these up the other day, desperately need some springs.
136448


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Bayy613]

Didn’t read the entire thread and realized it’s for S3’s, my apologies!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Dubstro]

Didn’t read the entire thread and realized it’s for S3’s, my apologies!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

I've looked through most of it and appears it evolved into all 8v. So you're good.

[XMetal]

Can someone explain why people post pics of their cars and have no center caps on their wheels?

What am I missing?

Thanks

Some wheels (some Rays) don't support a center cap

[PoonFlavordTang]

Just picked these up the other day, desperately need some springs.
136448


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Where in nc?

[MikTip]

Some wheels (some Rays) don't support a center cap

thanks[cool]

[ralphie_43]

Could I get away with 18x9.5 et35 with 255/35 18?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Spinnetti]

Could I get away with 18x9.5 et35 with 255/35 18?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Probably would be tight without camber changes both front and rear. I'm running 18x9 ET30 with 255 and there is plenty of room, but I have camber plates up front at -2.

[949]

18x9.5 et 35 Cosmis Racing Wheels 245 40 18
136275136286

do you have any more photos of the stance?
whats the camber measurements?

[jleclercz31]

Could I get away with 18x9.5 et35 with 255/35 18?


This is 18x9.5 et38 with 265/35/18’s

Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

https://uploads.tapatalk-cdn.com/20190922/6868f41ea200a5872d07c490728ecb87.jpg



Sent from my iPhone using Tapatalk

[ralphie_43]

https://uploads.tapatalk-cdn.com/20190922/6868f41ea200a5872d07c490728ecb87.jpg



Sent from my iPhone using Tapatalk

Looks Good, stock height?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[jleclercz31]

Looks Good, stock height?

Indeed

Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)




Sent from my iPhone using Tapatalk

[ralphie_43]

Sent from my iPhone using Tapatalk

Planning to lower? Where wheels are those?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Karbon]

https://uploads.tapatalk-cdn.com/20190923/5fdff80a22cea960d14bed25c5608dee.jpg

[Mops@Nemesis]

Looks killer Mike [emoji1376]


MOPS on the Move! [emoji593]

[Yoyigu_19s3]

Hi ! First sorry for my bad english. I'm from Chile and my car is a 2019 s3 8v sportback, ( love it ). I have h&r sport spring with mag ride ( about 1" ) , my question is ... Oz ultraleggera 18x8 ET35 and 225/40/18 works without problems ? No rub or etc ? And For 8" recomend 225 or 235 ? , oem wheels for now.

https://i.imgur.com/bbmajf9.jpg
https://i.imgur.com/ai9bo50.jpg
https://i.imgur.com/hn50ULb.jpg
https://i.imgur.com/M8znupp.jpg


Regards!

[Karbon]

Looks killer Mike [emoji1376]


MOPS on the Move! [emoji593]

Thanks Ben [emoji1303]

[XMetal]

Hi ! First sorry for my bad english. I'm from Chile and my car is a 2019 s3 8v sportback, ( love it ). I have h&r sport spring with mag ride ( about 1" ) , my question is ... Oz ultraleggera 18x8 ET35 and 225/40/18 works without problems ? No rub or etc ? And For 8" recomend 225 or 235 ? , oem wheels for now.

https://i.imgur.com/bbmajf9.jpg
https://i.imgur.com/ai9bo50.jpg
https://i.imgur.com/hn50ULb.jpg
https://i.imgur.com/M8znupp.jpg


Regards!

Just curious...If you're going to "upgrade" your wheel setup, why not get some added performance benefit out of them as well? Why would you want to stick with the narrow 8" wide wheel and narrow 225 tires? Why not go with 8.5" or 9.0" wide wheels and stick some 255/35 tires on them?

[Yoyigu_19s3]

Hi XMetal, It is a very good idea too. it could be oz ultraleggera or superturismo lm in19x8.5" et38 , but they are heavier..

I just want to know if I could have any problem with the et35 offset with 18x8.

[dpmotley]

Hi XMetal, It is a very good idea too. it could be oz ultraleggera or superturismo lm in19x8.5" et38 , but they are heavier..

I just want to know if I could have any problem with the et35 offset with 18x8.
I have 8J ET40 on the front of my sportback and they are flush with the fender. The 8J ET35 would poke by 5mm on the front. It's gonna be fine on the back though.

[Yoyigu_19s3]

I have 8J ET40 on the front of my sportback and they are flush with the fender. The 8J ET35 would poke by 5mm on the front. It's gonna be fine on the back though.

thanks for the reply! you use 225/40/18 tires? Lowering ? can you upload pictures pls

Edit : i have you on instagram LoL

[dpmotley]

thanks for the reply! you use 225/40/18 tires? Lowering ? can you upload pictures pls

Edit : i have you on instagram LoL
I follow you on Instagram too :)
My car is on Eibach Pro springs. As to the tyres, they are 235/35/19. But you are interested in width of the rim which is the same 8J as yours. The pics on Instagram are the best of what I have and only the last few have the spacers on the front and the wheels are turned a little for the better effect, so they don't show what you are interested to see. I'll try to take a couple of pictures tomorrow.

[dpmotley]

Here you go!

Tyres: 235/35/19 Goodyear Eagle F1 Asymmetric 5.
Rims: S3 reps 19x8 ET45 with 5 mm spacers on the front (makes it ET40) and 8 mm spacers on the rear (makes it ET37).

Front:
https://live.staticflickr.com/65535/48846741911_5eab928e21_o.jpg (https://flic.kr/p/2hqqjzn)
https://live.staticflickr.com/65535/48846741876_309e4d5b2a_o.jpg (https://flic.kr/p/2hqqjyL)

Rear:
https://live.staticflickr.com/65535/48846741951_b3533e864c_o.jpg (https://flic.kr/p/2hqqjA4)

I'm going to fit 18x8 ET42 rims with 225/40/18 winter tyres soon in November.

[Yoyigu_19s3]

Here you go!

Tyres: 235/35/19 Goodyear Eagle F1 Asymmetric 5.
Rims: S3 reps 19x8 ET45 with 5 mm spacers on the front (makes it ET40) and 8 mm spacers on the rear (makes it ET37).

Front:
https://live.staticflickr.com/65535/48846741911_5eab928e21_o.jpg (https://flic.kr/p/2hqqjzn)
https://live.staticflickr.com/65535/48846741876_309e4d5b2a_o.jpg (https://flic.kr/p/2hqqjyL)

Rear:
https://live.staticflickr.com/65535/48846741951_b3533e864c_o.jpg (https://flic.kr/p/2hqqjA4)

I'm going to fit 18x8 ET42 rims with 225/40/18 winter tyres soon in November.

Thank you very much for the reply! And sorry for my delay. Your car looks amazing, it means that the 18x8 et35 will not have problems with the fenders.

Regards !

[charvey]

Will 18x9.5 fit my A3 Quattro? And if so what offset would be best...

[jleclercz31]

Will 18x9.5 fit my A3 Quattro? And if so what offset would be best...

Search this thread, and take a note of the offsets. I run 18x9.5 et38. I have a slight bit of poke with a 38mm offset and 265/35 tires, so I wouldn’t go any lower. Check out my
post history for pictures.


Sent from my iPhone using Tapatalk

[charvey]

Search this thread, and take a note of the offsets. I run 18x9.5 et38. I have a slight bit of poke with a 38mm offset and 265/35 tires, so I wouldn’t go any lower. Check out my
post history for pictures.


Sent from my iPhone using TapatalkRight now I'm leaning towards 18x9.5 et43 with 255/35. Your setup is seriously meaty and I love it lol

[Flom Motorsports]

hey all,

picked up my '18 rs3 a few weeks ago. looking at a set of wheels, very aggressive fitment: 19x10.5 et22 square. gonna be lowered on h&r vtf springs so i'll have the adjust-ability. not sure on tire size, i know i'll have room if i run a 30 series aspect ratio, trying to figure out tread width (235, 245, or 255). I already know i'll have to roll the fenders, and do the other fender tricks.

thoughts?

[jleclercz31]

hey all,

picked up my '18 rs3 a few weeks ago. looking at a set of wheels, very aggressive fitment: 19x10.5 et22 square. gonna be lowered on h&r vtf springs so i'll have the adjust-ability. not sure on tire size, i know i'll have room if i run a 30 series aspect ratio, trying to figure out tread width (235, 245, or 255). I already know i'll have to roll the fenders, and do the other fender tricks.

thoughts?

Please don’t put a 235 on a 10.5” wheel.


Sent from my iPhone using Tapatalk

[Flom Motorsports]

Please don’t put a 235 on a 10.5” wheel.


Sent from my iPhone using Tapatalk

change of plans. ended up going with 19x9 et 20 and 34, 3 piece wheels so I can go wide and change offset in the future. just need to decide what width tires to go with

[dimonblr]

Got the wheels installed today, had to trim the rear shock dust cover, adjusted to max camber on the rear. Minor roll/screw tab removal on the front. No rubbing so far... may remove front liner and roll a bit more.

https://image.ibb.co/d7FJSS/20180420_194655.jpg (https://ibb.co/emq7Mn)


Looks so good!

[S3YouLater]

This is my Bagged '17 S3. I installed Airlift Performance 3P system about 3 weeks ago and recently just got my TE37s! Took 5 1/2 months to get here, but worth the wait!

Wheel Set Up:
18x9 +50 Offset 66.6 Center Bore
• 57.1 to 66.6 Wheel center hub adaptors (Amazon)
Falken Azenis FK453 255/35/18

I have a 3mm Spacer in the fronts, otherwise the wheel was so close to the strut that the 255 tire was rubbing. This added enough space to clear the strut.

Suspension Set Up:
Airlift Standard Ride Height (Just me, decent roads) [Primary]
45psi / 45psi (Front Left / Right)
70psi / 70psi (Rear Left / Right)

Airlift Raised Height (Loaded Car/Passengers, Highways/Crappy Roads)
55 / 55
76 / 76

Lowered Ride Height (Just me, Buttery Smooth/Fresh Roads)
38 / 38
55 / 55

FIRST PIC: Raised to Standard Ride Height
LAST 3 PICS: Airred Out to 0psi All around

https://i.ibb.co/Wy8MY2M/IMG-1871.jpg

https://i.ibb.co/Lhdq8sd/IMG-2150.jpg

https://i.ibb.co/hRRDydz/IMG-0723.jpg

https://i.ibb.co/r7Kt2TL/IMG-0722.jpg

[Grey3]

This is my Bagged '17 S3. I installed Airlift Performance 3P system about 3 weeks ago and recently just got my TE37s! Took 5 1/2 months to get here, but worth the wait!

Wheel Set Up:
18x9 +50 Offset 66.6 Center Bore
• 57.1 to 66.6 Wheel center hub adaptors (Amazon)
Falken Azenis FK453 255/35/18

I have a 3mm Spacer in the fronts, otherwise the wheel was so close to the strut that the 255 tire was rubbing. This added enough space to clear the strut.

Suspension Set Up:
Airlift Standard Ride Height (Just me, decent roads) [Primary]
45psi / 45psi (Front Left / Right)
70psi / 70psi (Rear Left / Right)

Airlift Raised Height (Loaded Car/Passengers, Highways/Crappy Roads)
55 / 55
76 / 76

Lowered Ride Height (Just me, Buttery Smooth/Fresh Roads)
38 / 38
55 / 55

FIRST PIC: Raised to Standard Ride Height
LAST 3 PICS: Airred Out to 0psi All around

https://i.ibb.co/Wy8MY2M/IMG-1871.jpg

https://i.ibb.co/Lhdq8sd/IMG-2150.jpg

https://i.ibb.co/hRRDydz/IMG-0723.jpg

https://i.ibb.co/r7Kt2TL/IMG-0722.jpg

Looks awesome! So clean!


Sent from my iPhone using Tapatalk

[Flom Motorsports]

update on my fitment, went with 265/30 square tires. wheels are 19*9 et 34 rear and et 20 front. vehicle is lowered on H&R VTF spring kit with rears being maxed out. vehicle does have slight rub in the rear when going over big bumps/dips at speed

149691149692149693149694149695

[Grey3]

I am considering a 265/30 19 on a 9.5 inch wheel with a 45 offset. I’m lowered on H&r sport springs....will it rub????


Sent from my iPhone using Tapatalk

[Grey3]

I am considering a 265/30 19 on a 9.5 inch wheel with a 45 offset. I’m lowered on H&r sport springs....will it rub????


Sent from my iPhone using Tapatalk

Any help w above appreciated!


Sent from my iPhone using Tapatalk

[rex_racer]

Any help w above appreciated!


Sent from my iPhone using Tapatalk

Will most likely rub. The common tire size w/ 9.5s is 245/35/19. Some have been able to get a 255 on there, but was typically with a narrower tire.

[Grey3]

Will most likely rub. The common tire size w/ 9.5s is 245/35/19. Some have been able to get a 255 on there, but was typically with a narrower tire.

Yea, seems like it’s 255/30 19s, or the 245/35s which is kinda stretched vs not much side wall of the 255/30s.... been all over these threads where people ask about it, but nobody actually was the Guinea pig! Lol


Sent from my iPhone using Tapatalk

[rex_racer]

Yea, seems like it’s 255/30 19s, or the 245/35s which is kinda stretched vs not much side wall of the 255/30s.... been all over these threads where people ask about it, but nobody actually was the Guinea pig! Lol


Sent from my iPhone using Tapatalk

I know of someone running 255/35/19 on 19x9 Nuespeeds. But he is also running some camber up front to clear the fenders. There is a user that runs 265/30/19 on 19x9.5 et 45 or 43. The 265 clears under the RS3 front fenders. The rear he had to have a bit of camber to clear. I'm not sure why the black car above w/ the Forgelines pokes so much, its only 5mm more outward than a 9.5 et45. I can only assume the camber has been reduced.

[Grey3]

I know of someone running 255/35/19 on 19x9 Nuespeeds. But he is also running some camber up front to clear the fenders. There is a user that runs 265/30/19 on 19x9.5 et 45 or 43. The 265 clears under the RS3 front fenders. The rear he had to have a bit of camber to clear. I'm not sure why the black car above w/ the Forgelines pokes so much, its only 5mm more outward than a 9.5 et45. I can only assume the camber has been reduced.

265/30s on the A3? Or Rs3? I kind of assumed that if rs3s can do it s3 and a3s could as well...I guess it also depends if the tire brand runs narrow or not. Thanks for your replies


Sent from my iPhone using Tapatalk

[rex_racer]

265/30s on the A3? Or Rs3? I kind of assumed that if rs3s can do it s3 and a3s could as well...I guess it also depends if the tire brand runs narrow or not. Thanks for your replies


Sent from my iPhone using Tapatalk

265/30/19 on an RS3. The RS3 front fenders are in fact wider than the A/S3 front fenders. Only the rear is the same. The user that was on the 265/30/19 was using a typically wider Michelin PS4S. The back can likely fit the 265 if you want to run a bit more than stock camber. In front you'll likely need camber plates. The plus side to the 265/30 is that it is actually shorter than the factory 235/35/19, so you'll get a touch more clearance.

[Paul@SupremePower]

265/30s on the A3? Or Rs3? I kind of assumed that if rs3s can do it s3 and a3s could as well...I guess it also depends if the tire brand runs narrow or not. Thanks for your replies


Sent from my iPhone using Tapatalk


265/30/19 on an RS3. The RS3 front fenders are in fact wider than the A/S3 front fenders. Only the rear is the same. The user that was on the 265/30/19 was using a typically wider Michelin PS4S. The back can likely fit the 265 if you want to run a bit more than stock camber. In front you'll likely need camber plates. The plus side to the 265/30 is that it is actually shorter than the factory 235/35/19, so you'll get a touch more clearance.

ALTI GT1 19x9.5 +45 Brushed Double Dark Tint in Michelin PS4S 265/30 lowered full down on KW HAS at stock camber. Fronts could come out another 2-3mm if needed and be fine. Only adjustments needed were to front liner with some minor heat and massage. Other than that it clears fine:


https://i275.photobucket.com/albums/jj283/supremepowerparts/Allset/42D5A829-9CCE-4C92-A96B-F63D003AA359_zpsvgksb21d.jpeg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/42D5A829-9CCE-4C92-A96B-F63D003AA359_zpsvgksb21d.jpeg.html)

https://i275.photobucket.com/albums/jj283/supremepowerparts/Allset/413C721D-049E-46DF-A42B-F858CB5A061F_zps8g9c1bjv.jpeg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/413C721D-049E-46DF-A42B-F858CB5A061F_zps8g9c1bjv.jpeg.html)

https://i275.photobucket.com/albums/jj283/supremepowerparts/Allset/90C60F11-3B8A-4129-9F63-1116BC1E3689_zps5gyzfunv.jpeg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/90C60F11-3B8A-4129-9F63-1116BC1E3689_zps5gyzfunv.jpeg.html)

[Grey3]

Gorgeous setup Paul!! Since I only have a regular A3 I cannot in fact fit that setup on the fronts?? I’m also lowered on H&r sport springs....How much wider are the Rs3 front fenders? If not 265/30s, would you do 255/30s? Or 245/35s? On the 9.5 et 45


Sent from my iPhone using Tapatalk

[Paul@SupremePower]

Gorgeous setup Paul!! Since I only have a regular A3 I cannot in fact fit that setup on the fronts?? I’m also lowered on H&r sport springs....How much wider are the Rs3 front fenders? If not 265/30s, would you do 255/30s? Or 245/35s? On the 9.5 et 45


Sent from my iPhone using Tapatalk

Thank you!

You can run 9.5 +45 on the A3 but as it usually does, it will come down to tire brand and size.

The front track is 20mm wider on an RS3 compared to an A3 and it’s front fenders are flared more as well. I don’t have any measurements on how much more though. Rear track is 14mm wider on RS3.

That said, PS4S in 265/30 on a lowered 9.5 +45 set up in front is not aggressive on an RS3 but still scrubbed the fender liner pretty good which needed some massaging to clear. The rears are very close On both sides at stock camber; a hair more positive It would rub the fender arch and a hair more negative the gas fill tube or shock.

So on an A3 I’m thinking you’re gonna need 245/35 on 9.5 +45 under those H&R sports To clear.

[949]

update on my fitment, went with 265/30 square tires. wheels are 19*9 et 34 rear and et 20 front. vehicle is lowered on H&R VTF spring kit with rears being maxed out. vehicle does have slight rub in the rear when going over big bumps/dips at speed

149691149692149693149694149695

interested to see more photos.

how is camber set for the front and rear?

[Flom Motorsports]

interested to see more photos.

how is camber set for the front and rear?

what other angle would you like to see? camber is at factory specs

[Grey3]

Thank you!

You can run 9.5 +45 on the A3 but as it usually does, it will come down to tire brand and size.

The front track is 20mm wider on an RS3 compared to an A3 and it’s front fenders are flared more as well. I don’t have any measurements on how much more though. Rear track is 14mm wider on RS3.

That said, PS4S in 265/30 on a lowered 9.5 +45 set up in front is not aggressive on an RS3 but still scrubbed the fender liner pretty good which needed some massaging to clear. The rears are very close On both sides at stock camber; a hair more positive It would rub the fender arch and a hair more negative the gas fill tube or shock.

So on an A3 I’m thinking you’re gonna need 245/35 on 9.5 +45 under those H&R sports To clear.

One final question then... 255/30 19s vs 245/35 19s. I know most here are running the 245/35s, but something about that slight stretch has me thinking 255/30s for no stretch, but I also see these are very low profile. Can you help me decide?? Lol thank you again for your expertise! Leaning 255/30 I think


Sent from my iPhone using Tapatalk

[949]

what other angle would you like to see? camber is at factory specs

more sides and front from a distance. im curious on how much you can actually tuck it if camber was added more

[S3_freak]

Any chance I can run either 19x8.5 +35mm (245/35) or 18x8.5 +35mm (245/40) without rubbing/poking out? I'm on stock suspension right now but will possibly lower it in the future.

[Gberg888]

https://www.fitmentindustries.com/wheel-offset-gallery/793217/2015-audi-s3-rohana-rfx5-kw-suspension

https://www.fitmentindustries.com/wheel-offset-gallery/767734/2016-audi-a3-quattro-niche-misano-air-lift-performance

https://www.fitmentindustries.com/wheel-offset-gallery/739401/2017-audi-s3-rotiform-buc-stock

https://www.fitmentindustries.com/wheel-offset-gallery/744850/2018-audi-a3-quattro-rohana-rfx7-emmanueledesign

https://www.fitmentindustries.com/wheel-offset-gallery/695197/2015-audi-s3-bc-forged-hxa221-air-lift-performance

https://www.fitmentindustries.com/wheel-offset-gallery/652332/2016-audi-s3-avant-garde-m590-emmanueledesign

https://www.fitmentindustries.com/wheel-offset-gallery/627518/2016-audi-s3-rotiform-wgr-air-lift-performance