What did you do with your c7 today?

[sd761]

Very nice! What wheel is that? Gloss black looks great!


Sent from my iPhone using Tapatalk

[widebodyfx]

Some change up wheels. 21x10.5" +35 BC Forged EH307 Matte Gunmetal. 285/30-21 PSS

[infinitereality]

Was changing the oil a couple weeks ago and noticed the red door lights so while in the shop I popped one off and it's just a 194 bulb so I grabbed some I had on hand and swapped them out. Camera doesn't show it very well, but they're way more red and definitely brighter than the stock incandescent bulbs. Pointless? Definitely, but that is the last incandescent bulbs I'm aware of on the car.





Front door LED and rear door stock


All LEDs

[The Infiltrator]

Some change up wheels. 21x10.5" +35 BC Forged EH307 Matte Gunmetal. 285/30-21 PSS

Very nice! Still have the HRE's?

[widebodyfx]

Yup, sending them out for refinish.

[The Infiltrator]

Yup, sending them out for refinish.

Nice. I wasn't sure if you were selling. If you ever do, let me know. I love that P101 wheel style!

[Gravy Train]

Was changing the oil a couple weeks ago and noticed the red door lights so while in the shop I popped one off and it's just a 194 bulb so I grabbed some I had on hand and swapped them out. Camera doesn't show it very well, but they're way more red and definitely brighter than the stock incandescent bulbs. Pointless? Definitely, but that is the last incandescent bulbs I'm aware of on the car.

All LEDs

Odd that these seem to have been decontented in C7.5 cars, where mine are just dead reflectors. There's a retrofit to purchase supplemental wiring harnesses and lights, but it's not that important to me, certainly not to go through the hassle of removing the door panels to install.

[Tonymastodon]

installed painted RS7 skirts on the S7.

[kapio]

Very nice! What wheel is that? Gloss black looks great!


Sent from my iPhone using Tapatalk

Wheelworld WH11 9.00x20 ET37

[sd761]

Wheelworld WH11 9.00x20 ET37

Sent from my iPhone using Tapatalk

[B6krampus]

IMG_6728.jpg
IMG_6704.jpg
Went from stock wheels to some old wheels i had on my c6
IMG_6731.JPGIMG_6732.JPG
The stocks looked better to me!

[0hmyg]

Finally dropped it and now I like it :)

Before:
1234.jpg

After:
asdfg.jpg
asdf.jpeg

[ilikecooltech]

Took a visit to @E1 Motorsports in Houston IMG_3335.JPG


Sent from my iPhone using Audizine

[Dasquade]

20190405_114713.jpg
Something i should have done way earlier, chrome delete window trimes and roof rails...satin black :).
Did the door handles aswell, mat carbon to fit the rest of the cars theme.
It was always a mather of...should i chrome delete it but finally went for it since i already done some parts (acc grills).
In a way, i can appreciate the alu mirrors even tough they highlight even more now but 'tradition' i guess :).

[Orch]

20190405_114713.jpg
Something i should have done way earlier, chrome delete window trimes and roof rails...satin black :).
Did the door handles aswell, mat carbon to fit the rest of the cars theme.
It was always a mather of...should i chrome delete it but finally went for it since i already done some parts (acc grills).
In a way, i can appreciate the alu mirrors even tough they highlight even more now but 'tradition' i guess :).

Looks awesome. Did you DIY? What was the cost?

Also, where did you get that splitter from?

[Dasquade]

Looks awesome. Did you DIY? What was the cost?

Also, where did you get that splitter from?

You refurring to what, the chrome delete on windows and rails? Nah i decided to let shop do it, but was mainly because i couldn't find 3M vinyl in thing strokes. Could of done the wrapping itself (as i did my front splitter and side skirt and rear spoiler etc). Shop charged me 180€ for windows and roofrails, fair price as most asked double and more! Front splitter is the one from Maxton but rewrapped in mat carbon.

[Orch]

You refurring to what, the chrome delete on windows and rails? Nah i decided to let shop do it, but was mainly because i couldn't find 3M vinyl in thing strokes. Could of done the wrapping itself (as i did my front splitter and side skirt and rear spoiler etc). Shop charged me 180€ for windows and roofrails, fair price as most asked double and more! Front splitter is the one from Maxton but rewrapped in mat carbon.

Yeh the chrome delete. Was literally just pondering the cost before I saw your post, good timing! Thanks for the info

[Dasquade]

Yeh the chrome delete. Was literally just pondering the cost before I saw your post, good timing! Thanks for the info

Well the issue is, i couldn't really find 3M or simular vinyl in small but long strips. You need at least 2m90-3m for the long window trim. You can find it abroad but shipment/taxes didn't cut it and can't mess up. Went for safe and let shop do it (the wrapping itself is mostly piece of cake, only the back lower corner is bit tricky due to the hard window rubber....
I went for satin black as the gloss had a soft orange peel look too it and overall it would of standed out imho compaired to the blendin look with the window rubbers (actually exact same color).

[Orch]

I wouldn't trust myself to do a good enough job tbh, so would want a shop to do it. satin black sounds like a good idea

[GasMan]

I wouldn't trust myself to do a good enough job tbh, so would want a shop to do it. satin black sounds like a good idea

Satin black is also less likely to show scratches from washing the car, whether by hand or through an auto wash. That's why I chose it over gloss black.

[GasMan]

35% ceramic tint done today!

20190405_181704.jpg
20190405_181544.jpg

[miketee]

Traded the S7 for a S5 sportback. Sorry to let it go, but it was time.
IMG_3532.JPGIMG_3538.JPG


Sent from my iPad using Audizine

[gersonz90]

RS6 bumper finally going onIMG_1101.jpg


Sent from my iPhone using Audizine

[07S6]

Went ahead and affixed the new spoiler lip. Exactly what the rear end needed.. really balances things out w/those large AWE tips at the bottom IMO.

IMG_4528.jpgIMG_4538.jpgIMG_4546.jpg

[widebodyfx]

Experimenting with Alex@Europrice.

Remote VAS ODIS calibration and coding.

[bonafyd]

Experimenting with Alex@Europrice.

Remote VAS ODIS calibration and coding.

Damn bro you're lucky! i'm waiting for him to release them for my car.
post pics/vids when it's all done please.

[widebodyfx]

Yup yup. Everything is working. car is dirty so will post some stuff up later. Been chasing Matrix lights on the C7.5 for YEARS, Alex finally got me off of his nagging list.


Sent from my iPhone using Audizine

[Shuga]

Traded the S7 for a S5 sportback. Sorry to let it go, but it was time.
IMG_3532.JPGIMG_3538.JPG


Sent from my iPad using Audizine

How do you feel about the power difference?

[hecarethwosu]

I did a quick waterless wash. Can't wait till this joint is lowered. IMG_20190407_134540.jpeg

Sent from my ONEPLUS A6013 using Audizine mobile app

[bonafyd]

Detailed the car and threw the new summer wheels on.

[bagged00]

Did ONR on mine as well

[bagged00]

Detailed the car and threw the new summer wheels on.

Details on all the specs on your air ride? I want the exact setup you got. I read some people were putting b8 bags on but after looking on air lift website I see they offer a c7 kit. Yours is sick. What's your trunk set up?

[Wilbur_RS7]

Went ahead and affixed the new spoiler lip. Exactly what the rear end needed.. really balances things out w/those large AWE tips at the bottom IMO.

IMG_4528.jpgIMG_4538.jpgIMG_4546.jpg

Can't wait for mine to come in! Anxious to see the quality. Could you shoot a quick pic with the spoiler up?

[GasMan]

Put a K&N air filter in my RS7 today.

I've literally never struggled that hard to change an air filter in my life.

The worst part is that the K&N doesn't sit as tight inside the box as the Audi filter so when you put the intake cover back on the filter drops out of alignment with the plastic ring inside the cover. Took multiple attempts to get it to sit right so I could lock the cover.

[kuattroo]

Detailed the car and threw the new summer wheels on.

Car looks good man......

[kuattroo]

Experimenting with Alex@Europrice.

Remote VAS ODIS calibration and coding.

So you in the Matrix now my friend......lol

[widebodyfx]

Detailed the car and threw the new summer wheels on.

Jeeeesus that is low. Hahahaha. Looking good man.

[widebodyfx]

So you in the Matrix now my friend......lol

Yep yep, Dynamic sweeping all around now. OCD is fed for now.

[bonafyd]

Details on all the specs on your air ride? I want the exact setup you got. I read some people were putting b8 bags on but after looking on air lift website I see they offer a c7 kit. Yours is sick. What's your trunk set up?

Accuair e-level, endo cvt 5gal tank

Car looks good man......

Thanks.

Jeeeesus that is low. Hahahaha. Looking good man.

Thanks.

[Caker]

Yep yep, Dynamic sweeping all around now. OCD is fed for now.

I thought I was content with my mods till I saw that lol, looks fantastic!

I got the wheels powder-coated and painted the center cap lettering to match the car