Hey all! a while back I started a thread about working on brackets to fix the ever present glove box breakage issue. I succeeded in making the brackets, and over the course of a few months managed to crank out over a hundred sets for people. But with working and school...the work got to be pretty demanding (I was making them from scratch). So I started working with a local shop, Tork Motorsports (who is a vendor on Audizine; Username: HPFPupgrade) and they are now making and selling the brackets!
So long story short, if you have a broken glove box, take a look at the following link and pick up a set! Despite the picture on their website, they are bent to fit exactly to the existing contours of the glove box (not just an L bracket, the picture shown is mid production) and have been powder coated black. They are laser cut and then have been countersunk to hide the screw heads and they also come with matching black screws. To answer your first question, no shipping is not necessarily 15$, you must create an account and add the brackets to your cart to see the shipping price as it depends on where you live.
Link:http://hpfpupgrade.com/Products/Show...Box+Repair+Kit
Do yourself a favor if you are not sure if you have a broken glove box... and check! Most people I have talked to found that it is already cracked and is starting to break, catch it before it falls on the floor, installation is MUCH easier if it is still attached.
These will fit ANY AND ALL: B6-B7 A4, S4, and RS4's
If you have ANY questions, feel free to post up here or to use the Contact Us section on the link above.
Thanks!
Traded 4/3/13
Bookmarks