Used S3 injectors

[Firefox250]

Sold

[Firefox250]

Bump

[Firefox250]

Bump

[DeathBlow]

Just curious did they send you the results of the flow tests?

[smot4200]

are you taking offers on these and im wondering why you are selling them after 1k?

[canadianA4B7]

I don't think these are even worth making on offer on, these are a must have item to build. He's asking a much better price for 5 then you'll ever find for 4. This is a great price for a must have item. I would scoop these up myself if I had the cash and add them to my Garrett turbo kit.

Great price no need to ask for these for less.

[smot4200]

I don't think these are even worth making on offer on, these are a military have item to build. He's asking a much better price for 5 then you'll ever find for 4. This is a great price for a must have item. I would scoop these up myself if I had the cash and add them to my Garrett turbo kit.

Great price no need to ask for these for less.

well he says shipped within the usa... We are both in canada.. sent p.m no reply. it dosnt hurt to ask if hes firm on price, i didnt give a low ball offer. If you dont ask then you will never know. If you have gone through 2 motors and 4 turbos.. I can see why you dont have money for them.

[vce1232000]

If you have gone through 2 motors and 4 turbos.. I can see why you dont have money for them.

...............

[canadianA4B7]

Lmfao good call mate. Just not in the " car budget" at this point. And your certainly correct I've spent way to much on turbos and motors!

U shud buy my Garrett kit if you got money laying around!!

Not sure but do you guys in bc not have any cross boarder address for deliveries? Lots of those our way. Ship to a USA address go pick them up and come back to Canada with them?

[smot4200]

Lmfao good call mate. Just not in the " car budget" at this point. And your certainly correct I've spent way to much on turbos and motors!

U shud buy my Garrett kit if you got money laying around!!

Not sure but do you guys in bc not have any cross boarder address for deliveries? Lots of those our way. Ship to a USA address go pick them up and come back to Canada with them?

I seen it in the classified, i orginally considered getting a gt28 but then i would have to build the motor and i dont have the money at this time to do it... cts turbo had a tax season sale on and it the k04 kit was on sale for 500 usd off, and i worked out a deal with one of the guys there and they gave me a package deal on most of my stage 3 stuff and i saved a buttload of money. I just bought the b7 and i havnt even driven it. and all the stage 3 stuff including brembos. Figured i would be happy with it for a year then i could get a gt30 rods done and upgraded engine and tranny mounts and hopefully make 450-500 whp next spring. And i could slap the k04 on my B6a4 winter car. 300whp probably feels like a new car when you have been driving a stage 2 b6. Im not allowed in the states. I have friends there.. but for the trouble of doing all that ill just pony up the extra for the S3 injectors. CTS turbo is 3 hour drive from me. Ive heard from a lot of diff threads though that the rs4 will work fine which i have 7 of them. But never know till you try!

[vce1232000]

I seen it in the classified, i orginally considered getting a gt28 but then i would have to build the motor and i dont have the money at this time to do it... cts turbo had a tax season sale on and it the k04 kit was on sale for 500 usd off, and i worked out a deal with one of the guys there and they gave me a package deal on most of my stage 3 stuff and i saved a buttload of money. I just bought the b7 and i havnt even driven it. and all the stage 3 stuff including brembos. Figured i would be happy with it for a year then i could get a gt30 rods done and upgraded engine and tranny mounts and hopefully make 450-500 whp next spring. And i could slap the k04 on my B6a4 winter car. 300whp probably feels like a new car

The 2.0T KO4 will not on the B6 1.8T. Its a total different set up.

450-500 whp is a pretty hard # to obtain without sacrificing reliability . Its not going to be that easy

[canadianA4B7]

Sent you a pm regarding things. Rather then clutter op's posting.

I have a feeling Firefox is using rs4 units? Think he has gone back and forth a few times. Hence this sale.

[smot4200]

Sent you a pm regarding things. Rather then clutter op's posting.

I have a feeling Firefox is using rs4 units? Think he has gone back and forth a few times. Hence this sale.

if he is id be interested to find out who does his tuning... and supporting mods he has... apparently the rs4 should be able to support up to 500 hp

[james12lucy]

well he says shipped within the usa... We are both in canada.. sent p.m no reply. it dosnt hurt to ask if hes firm on price, i didnt give a low ball offer. If you dont ask then you will never know. If you have gone through 2 motors and 4 turbos.. I can see why you dont have money for them.

OP is in Colorado, not Canada. I'm guessing you were thinking he was in Ontario. If he was in Aurora, Ontario, is be picking these up for my track car.

You can run RS4 injectors in a B7 A4 but the spray pattern isn't great. There is some back and forth on the topic (bench tester doesn't have the pressure needed to properly spray, etc). You don't necessarily need to tune for injectors. I mean, I am running S3 injectors on a JHM Stage 2 tune. They're not supply more fuel, but they are running at a lower duty cycle. Your car will run with RS4 injectors on any tune and won't flood; you'll have cold start issues because of the spray pattern.

Your K04 won't bolt onto your B6, but there is a decent market for used ones. If you got a good deal on it, you'll make your money back if you upgrade. In all honesty, to get the most out of the K04, you're likely to want rods anyway. They're snappy turbos and can easily bend/break rods if tuned to full potential.

CanadianA4B7 knows his stuff. He's trialed a few setups on his car and likely has found a winning combination. I'm following his advice and not his actions. I'm building a badass K03 with his support this summer (rods,
Forged pistons, balanced crank, etc), spraying a ton of meth, and generally abusing the stock turbo. And instead of doing a mild upgrade, I'll likely just go for the nuts with an EFR next year.

All in, this is a great price for these injectors. OP, if they're still around when I need them for my track car; I'll take them. That may be a few months away.




Sent from my iPhone using Tapatalk

[smot4200]

yea im gathering some of that now.. ive had a maxed out k03 in a b6a4 for 3 years. i wanted to go gt2871.. ive heard of ppl breaking rods with k04's but to aggressive of tunes.. need smooth torque curve. i dont plan beating the hell out of it.. but nice to have power when you need it. eventually ill do the rods. just not in the budget at the moment. when im ready ill already have all the supporting mods and ill upgrade the turbo at the same time. this is just phase 1 in the dream.. comming from 1.8t there is a lot less aftermarket options for 2.0. Hopefully that changes.

Sent from my SM-G920W8 using Audizine mobile app

[Firefox250]

PM's replied. Sorry my email didn't get a notification

[Firefox250]

Bump

[Firefox250]

A4 Quattro Joe your mail box is full.

[A4 Quattro Joe]

I left my number hit me up whenever I am in Brighton so shipping wouldn't be necessary unless u need to. Let me know thanks Firefox250

Sent from my SM-G935P using Audizine mobile app

[Firefox250]

Sold