Lot's of Audi Performance parts, wheels, tires and more....

[_Lex_]

Lot's of Audi Performance parts, wheels and more....


5x112 Wheels will fit Audi, VW, Mercedes & more makes with adapters..

iForged 20" Daytona 5x112: $1400 wheels only
20x8.5 et 32 (2.5") lip
(wheels sell for 3500 a set)
http://www.iforged.com/v8/index.php?act=home
one wheel had a light crack and was repaired

iForged 20" Neo's 5x112: $1600 wheels only
front: 20x8.5 et32 (2.5" lip)
rear: 20x9.5 et 37 (3.5") lip
(wheels sell for 3700 a set)
http://www.iforged.com/v8/index.php?act=home


OZ Ultraleggra HLT 20" 5x112: $700 wheels only (2 wheels minor bends still hold air)
http://www.ozracing.com/car_wheels_v...HLT/25494.aspx
(wheels sell for 2700 a set)

Team Dynamic 18" 5x112: $400 (2 wheels bent need repair other two have tires)
http://www.rimstock.co.uk/rimstockusa/homepage.php

(4) BF Goodrich G-Force T/A 255/30/20 85% Tread: $450

(3) Falken 452's 235/30/20 85% Tread: $125 Each

(2) Yokohama Advan Sport 255/30/20 70% Tread: $125 each

KW V2 Coilovers for C5 Allroad / A6 Avant / S6 Avant: $900
http://www.kw-suspension.com/us/kw_variant_2.php

Hotchkiss Sway Bars (Front/Rear) for C5 Allroad / A6 Avant / S6 Avant: $400
http://www.hotchkis.net/audi_allroad...set_black.html

B5 S4/ C5 A6/Allroad 2.7t Giac X-Chip M-BOX ECU:
http://www.giacusa.com/

B5 S4/ C5 A6/Allroad 2.7t APR Stage 2+ M-BOX ECU:
http://www.goapr.com/

(2) APR R1 Diverter Valves: $100 each
http://www.goapr.com/products/r1.html

(2) Stratmosphere Hyperboost Diverter Valves: $85 each SOLD

(2) B6 1.8t manual radiator support (New) $100 each

(2) k03 turbos off 2.7t with 60k miles: $200 each SOLD

(2) k03 turbos off 1.8t with 50k and 80k: $200 each SOLD

(1) Blown GT3076R T25 Needs new CHRA: $300 SOLD

(1) Apikol Rear Diff Mount for B6/B7 A4/S4/RS4 (only ran for 4k miles): $200 SOLD

(1) Apikol Snub Mount for B6/B7 A4/S4 (New) $25 SOLD

(1) Set for B5 S4, C5 Allroad/S6, B6/B7 A4/S4 (NEW) Stoptech rear rotors with (New) Stoptech rear stainless steel lines: $300
http://shop.achtuning.com/StopTech-1...udi-B7-S4.aspx
http://shop.achtuning.com/StopTech-9...udi-B7-S4.aspx

(1) Set 355 Stoptech BBK for B5 S4, C5 Allroad/S6, B6/B7 A4/S4 (Calipers, Rotors, Pads, SS Lines) ran for 10k miles: $1850
http://shop.achtuning.com/stoptech-8...udi-b7-s4.aspx

B5 A4/S4 front axles R+L (new): $100 each

B5 A4 gauge cluster 120k on odo - 50

(2) B6 A4 belly pan: $40 each

B5 A4/s4 arm rest broken top: $20

B5 A4/s4 snowboard rack oem: $150

B5 A4 Black pref leatherette seats front & rear drivers seat has usual tear: $150

B5 A4/S4 Clear euro taillights (new never used): $75

(2) B6/B7 A4/S4 bumper struts 50 each

B6 A4/S4 Bumper support: $50

B6 Oem snowboard rack: $175

B7 A4 oem rubber mats: $80

B7 A4/S4 plate filler: $50

C5 A6/Allroad/S6 Hood latch: $25

C5 A6/Allroad/S6 bumper strut: $50

ECS 5x100 5x112 5mm Spacers: $35 SOLD
H&R 5X100 5X112 5mm Spacers: $40 SOLD
H&R 5x100 5x112 10mm Spacers: $60 SOLD
H&R 5x112 30mm Spacers with stud conversioin: $100

---------------------------------------------------------------------------------------------------
Full Turbo Kit for Audi/VW 1.8t:
Custom Eurocode/APR Stage 3++ Kit for Transverse 1.8t (will not seperate) $5500 (Makes 450whp on pump 516 on race on Built Stroker Motor) Must have built motor for this tune (28-32+ psi).. can be ran on stock motor with a different tune
http://www.ecodetuning.com/
http://www.goapr.com/

apr intake maniflod
http://thmotorsports.com/i-222637.as...ingSeanVehSpec

Custom One off ER Frontmount Intercooler
http://www.evolutionracewerks.com/

Custom Eurocode/APR ECU Tune w/ 3 Files
http://www.ecodetuning.com/

apr exhaust manifold
Garrett GT2871R
Walbro 255 & Apr inline fuel pumps
550cc & 880cc injectors
5 Bar FPR
APR MAF Housing
R32 MAF
Custom Piping
3" Downpipe
---------------------------------------------------------------------------------------------

I can install anything for extra $

[Greedo]

Find me some sport springs to borrow for like two weeks.

[_Lex_]

I have some oe sport springs off a b6 sline.. come get em..

[Greedo]

I need your number - never thought to get it when I saw you at Jordan's.

[mec]

Interested. Can you send me some pics of the Apikol snub mount? 970 401 3081.
Thanks

Martin

[URHank]

PMs are full, but txt me. I am interested in a few items

702.370.1247

Hank

[mec]

Good luck. Been waiting for a response. Tried text pm post and calling with no luck

[_Lex_]

^I was busy working this weekend..

patience is a virtue... Haha

Sent from my SGH-T989 using Tapatalk 2

[mikehawk666]

Good luck. Been waiting for a response. Tried text pm post and calling with no luck

In his defense, we spent about 6 hours on my s4 yesterday, as well as he had quite a few photo gigs and the man is an all around busy bee. I'll have him drop the snub off to me and I'll send you a picture and you can pick it up from me.

[Greedo]

Alex, I need some conical lugs (10) for some 8mm spacers. Work some magic, otherwise I need to order them from Black Forest.

And I'll probably come grab that fender this week if you have it.

[mec]

In his defense, we spent about 6 hours on my s4 yesterday, as well as he had quite a few photo gigs and the man is an all around busy bee. I'll have him drop the snub off to me and I'll send you a picture and you can pick it up from me.

Thanks, and sorry for being inpatient.

[mec]

Thanks for the parts It was nice to meet you!

[jbostock]

Any chance of shipping the fmic to Aus? Assuming it fits the Aus build (I think it's just the driving position that is reversed and the engine bays / orientations are largely the same

[turboSpartan]

Any chance you have a Sun Visor Clip for a B6 (not sure if other years/models used the same one, I need the Gray version)?

TIA

[_Lex_]

Alex, I need some conical lugs (10) for some 8mm spacers. Work some magic, otherwise I need to order them from Black Forest.
And I'll probably come grab that fender this week if you have it.

I have some that I used for some 5mm spacers.. let me know if you want to try them..

Thanks for the parts It was nice to meet you!

let me know when your ready to pull that motor apart.. I have a polydrive if you need it

Any chance of shipping the fmic to Aus? Assuming it fits the Aus build (I think it's just the driving position that is reversed and the engine bays / orientations are largely the same

Sorry man.. not willing to separate the kit right now..

Any chance you have a Sun Visor Clip for a B6 (not sure if other years/models used the same one, I need the Gray version)?
TIA

I'll check for you tomorrow...

[Greedo]

You didn't bring the fender yesterday. Booooooo!!!!

or something.

[mec]

Hey Alex,

Do you have any updates on those parts I texted you about Thursday?

Thanks.

[_Lex_]

yeah just waiting on some prices... I'll pm you when I get them..

[mec]

Thanks alot man!

[Cris]

I have some oe sport springs off a b6 sline.. come get em..

I don't suppose the B6 springs are inter-changeable with the B5 1.8TQ? I'm looking for OE sport springs (and shocks) for a '98.5/B5 1.8TQ. Thanks!

[boostedAvant]

Negative, they're totally different suspension styles.

[_Lex_]

just got back into town last night.

replied to all pm's...

[mikehawk666]

Lex call me. I need that k03 plus want you to take a look at the mk4 Jetta we got

[V8EATER]

Lex luthor! your inbox is full and I wanted to see if you still had those APR R1 Dv's Available.

Thanks

[_Lex_]

allright all you broke asses.. taking best offers on everything.... need to clean out my garage ASAP!!

Sent from my SGH-T989 using Tapatalk 2

[BINK]

Clean out your inbox yo!!!

[Richard]

Answer your phone!

[V8EATER]

Reply to messages posted in your thread!

[_Lex_]

if anyone needs to get a hold of me your best bet is to text me on one of my cell #'s... my phones are ringing constantly.. I dont check az as much as id like to because im superbusy 24/7.

v8eater.. sorry man the dv's are spoken for (clubcheeta)
*edit.. clubcheeta sold his alcons.. dv's and ecu are still available

richard.. see you monday

Sent from my SGH-T989 using Tapatalk 2

[_Lex_]

and if anyone needs any other parts not listed let me know... i can get my hands on almost anything..

Sent from my SGH-T989 using Tapatalk 2

[mec]

Engine build parts for my 2.0T :)

[V8EATER]

Don't have your cell :(

[_Lex_]

^
3033196166/7209333356

Sent from my SGH-T989 using Tapatalk 2

[_Lex_]

two piece b5 s4 full exhaust: $450
dual 2.5" dp's vbanded to single 3" back to dual tips, no muffler but has resonator

can install for extra $$



Sent from my SGH-T989 using Tapatalk 2

[_Lex_]

so i have shit ton of parts now...

b5 s4 noggy, black, casa, silver....

allroad black

c5 a6 s6 mutiple colors.. ha!!

s8

a8

urs4 /s6

all kinds of exterior, interior, eclectrical & mechanical parts...

and NO Idont have any b5 s4 front bumpers!.... haha!

anyone need anything holla

Sent from my SGH-T989 using Tapatalk 2

[G Men 08]

Son of a B! where do you find all of these damn cars?!

[klhbeetle]

Sent you a text about sways.

[_Lex_]

^ill let you know in a bit...

Sent from my SGH-T989 using Tapatalk 2

[getslideways]

just shot you a text about some interior pieces. Thanks again

[SomeDayAS4]

what do these look like:
B5 A4/S4 Clear euro taillights (new never used): $75

and how much for b5 facelift tails