Audi Side Assist retrofit

[Jfonse81]

Don't know what you did wrong with that copy/paste, but damn. That's a mess to try and read.

See if you can edit the post and clean up all the missing carriage returns. Did you copy it right out of the program window? Don't do that. Save the log (do not Print) to a file and then open the file and copy/paste the log text from that.

Ok , I'll try doing that instead

Sent from my SM-G973U using Audizine Forum mobile app

[Jfonse81]

Ok , I'll try doing that instead

Sent from my SM-G973U using Audizine Forum mobile app

I'm currently working with the drivers door and verifying all wires are connected according to the Audi wiring diagram No. 121/4 .
And I noticed that the gray/blue wire that goes from E530 (button) to the T27a (door body connector) is missing at the inside part connector (slot #10). At the door side of connector T27a it has it correctly, but at the inside cabin side it's missing . And there's no other wire (gray/blue) in any other slot neither.
According to wiring diagram No. 121/4, it's states that wire comes from :

1) B490 - connection 26 at the "main wiring harness.
**** What harness is this ?

2) And then goes to T32b / slot #17 connector that's from J519 ( vehicle electrical system control module)
**** Which module is this, and where's is it located ? Is this the BCM1 thats located under dash around the steering column ?

3) what are the numbers on the end of the wires inside a box mean ? : 23, 22, 9, 8

Below is the link with pics

https://imgur.com/a/zKOPale

Sent from my SM-G973U using Audizine Forum mobile app

[Jfonse81]

I'm currently working with the drivers door and verifying all wires are connected according to the Audi wiring diagram No. 121/4 .
And I noticed that the gray/blue wire that goes from E530 (button) to the T27a (door body connector) is missing at the inside part connector (slot #10). At the door side of connector T27a it has it correctly, but at the inside cabin side it's missing . And there's no other wire (gray/blue) in any other slot neither.
According to wiring diagram No. 121/4, it's states that wire comes from :

1) B490 - connection 26 at the "main wiring harness.
**** What harness is this ?

2) And then goes to T32b / slot #17 connector that's from J519 ( vehicle electrical system control module)
**** Which module is this, and where's is it located ? Is this the BCM1 thats located under dash around the steering column ?

3) what are the numbers on the end of the wires inside a box mean ? : 23, 22, 9, 8

Below is the link with pics

https://imgur.com/a/zKOPale

Sent from my SM-G973U using Audizine Forum mobile app

I'm pretty sure this is the fault I'm having !

Sent from my SM-G973U using Audizine Forum mobile app