PART OUT built 1998 A4 1.8T AEB

[nynoah]

I am parting out a 1998 AEB fully built A4. Most all the parts are pulled out. I will be adding more things for sale coming up. The engine on this car was rebuilt 10K miles ago. Before you ask, NO I am not selling the S4 bumper. I am going to be adding more parts for sale so keep an eye for things. Right now the engine is not pulled, but I am working on that. I would prefer local pickup in Baltimore for heavy items like the engine and the transmission. I am putting the proceeds of this sale into my 2001 A4 5 spd Avant soon to be 6758 EFR from PAGPARTS.





Tune and fueling system 034 AEB fueling solution. Includes 034 POS elim wiring kit for 2.0l Coil packs, coilpacks, Slot MAF, 550 cc EV14 injectors, and tuned ECU. Plug and play AEB solution for a 28 series turbo. $1300



Built engine bored to 81.5mm Wiseco pistons, IE rods, new rod/main bearings, polished crank, balanced intermediate shaft, ARP main cap studs, ARP cylinder head studs, rebuilt cylinder head. Compression test done all cyliners between 160 and 140 PSI. $1500





2871r Elimnator with a fresh CHRA (10K), with high flow ATP manifold, test pipe and 3. inch intake, $1400



Apikol side intercooler SMIC with hose kit. $450 SOLD SOLD


Headlights – 1998 after market headlights with Morimoto xenon 55watt ballast kit. $200




630 UNI tune with 630cc injectors for a 2001 AWM $600

I have tons of other parts to add to this, so please check back later

[A1 A2 German]

Maybe interested in the 3" induction boot if you part with it.

And for those looking at his turbo yet still want a Gt2871R Elim induction boot I have the Gt2871R Elim 2.75" Maf silicone Samco induction boot. The pro with mine is you can keep your current induction set up, and can swap back to a Ko4 down the road too, and not have to rebuy/remake everything.

Got excited about your Uni 660cc tune, saw it was for mafless, grr.

[nynoah]

No my 2001 AWM 630 uni tune is for a MAF.

The other tune above is for the AEB.

Sent from my SM-N910V using Audizine mobile app

[coolgraymemo]

Fuuuu. I need money.

[pyongwonse]

Are you messing with the clutch?

[DollaDollaDill]

Pmd you on vortex, need rear strut housing

[DollaDollaDill]

Oh, sorry. Wrong part out!

[Spectre1130]

Would you sell just the turbo by itself? If so how much?

[ro0n3y41]

How much for ac compressor an ac linr from ac to condensor?

[dwbunks]

Clutch setup spoken for?

[nynoah]

I am not sure what the clutch is. I still have to pull the engine.

Sent from my SM-N910V using Audizine mobile app

[nota_towel]

I'll take the Apikol intercooler and piping. Pm me please

[nota_towel]

I'm still interested in this intercooler if it's still available. Let me know

[nynoah]

APR R1 Diverter SOLD

Side Mount Intercooler SOLD

Dropped prices on other items

[BaseDrifter]

Selling the A8 wheels?

[nynoah]

Selling the A8 wheels?

Eventually yes. But I am hoping for a local sale first. Shipping from MD to CA would be super expensive.

[audi-medic]

Do you have a diff mount?

[audi-medic]

Do you have a diff mount?

[Migzvp]

Do u still have parts?

Sent from my SM-G900V using Tapatalk

[nynoah]

Car is gone only have the A8 wheels. They are now located in Bakersfield

Sent from my SM-N910V using Audizine mobile app

[kk97]

Interested in intake mani, how much?

Sent from my SM-N920W8 using Tapatalk

[nynoah]

600

Sent from my SM-N910V using Audizine mobile app

[Dimshadow33]

600

Sent from my SM-N910V using Audizine mobile app

still have intake mani?

[MooseInATree]

Car is gone only have the A8 wheels. They are now located in Bakersfield

Sent from my SM-N910V using Audizine mobile app

Bakersfield California?