Partial part out - even the EFR!

[Jerry1847]

All prices OBO

On the block:
EFR 6758 setup - will include a K&N typhoon intake, connecting hoseses, lines and all that stuff. Will also include an upgraded GFB DV+, an IE manual boost controller, custom vented oil catch for crank case return. Will not include the tuner! You would need to buy a new license anyways, vin specific. Will discuss specifics with buyer. Your going to get everything I'm using on my setup! No hunting for parts! - SOLD

APR turbo back quad tip with quad rear valance and hardware -$1500 +shipping

Eurocode Intercooler +700 shipped

IE intake manifold + $700 shipped (2weeks)

OEM Q5 brembo brake upgrade with ecs 2 piece slotted and drilled rotors (painted blue). Pads included. - SOLD

White OZ allegritas with Hankook ventus v12's (40lbs per wheel total weight) less than a year old and only around 2500 miles - $1800 local pickup

Rotomass crank pulley - best offer

034 oil catch can - $350 shipped

OEM brushed aluminum trim set - $350 shipped

Eurocode alukreuz - $375 shipped

Eurocode sway bars and 034 end links (front and rear) - $550 shipped

Will add more stuff when this part is complete...

[diego_demarco]

Any pics of the calipers?

[zokissima]

Very interested in the IE intake manifold

[Party_Marty]

Interested in the Brake System!! I pm'd

[Black_Pearl_B6]

What exhaust system did you have

[Jerry1847]

What exhaust system did you have

Its the APR Quad tip Turbo back system and a valence from a group buy a year or so ago...

- - - Updated - - -

http://www.audizine.com/forum/showth...eeper-a4-build

Link to my build thread, has most of the pics and details from the installs

[diego_demarco]

Any pics of the brakes installed?

[Mod.Kill.Yut.]

Condition and pics for the FMiC?


Sent from my iPhone using Tapatalk

[Smellie]

Did you have a place install the turbo or did you DIY it?

If it was installed somewhere, how much labor do you estimate?

[flycivicsi]

In for the efr set up and quad exhaust package price shipped to Canada

[flycivicsi]

Feel free to look me up to see I am not a fake
http://honda-tech.com/sale-10/leavin...nside-3271006/

[Jerry1847]

Any pics of the brakes installed?

In some of the pics below, ill see if i can dig up more. Had like 4 phones then so pics are everywhere...

[Jerry1847]

Condition and pics for the FMiC?


Sent from my iPhone using Tapatalk

Ill try and get pics when i get it uninstalled. Its in good condition. Some dents in a couple of the pipe opening from slight over tightening, noting major. The pipe running to the TB has a port for meth. I have it plugged and sealed, but there is a port. Otherwise no issues and have some new silicone to go with. Its a solid kit.

[Jerry1847]

Did you have a place install the turbo or did you DIY it?

If it was installed somewhere, how much labor do you estimate?

It was all DIY. I only found one shop and the entire setup and install would have been like 8 or 9 k installed with tune.

Its just going to be a turbo swap. Should not be complicated to reinstall. the worst was getting all the correct fittings and lines.

[flycivicsi]

It was all DIY. I only found one shop and the entire setup and install would have been like 8 or 9 k installed with tune.

Its just going to be a turbo swap. Should not be complicated to reinstall. the worst was getting all the correct fittings and lines.

So not interested or?

[Jerry1847]

So not interested or?

Will PM you tonight.....

[BMWManiac]

APR turbo back exhaust....is this no longer available? Would it mount to a 2013 B8.5 A4?

[flycivicsi]

Will PM you tonight.....

Sounds good I would also be interested in the intercooler and intake manifold.

Feel free to text me 3065515139

[Patrick_S5]

Interested in brakes

[Jerry1847]

Bump. Parts coming off Friday and Saturday. Shipping on Monday!

If you are interested make an offer. I probably can't make good shipping estimates so I'll set a shipping price and if the actual cost is less I'll refund the difference. If it's more I'll pay.

Priority on what gets pulled goes to the first to pay. PayPal only ( unless local pickup in the DC area)

[Jerry1847]

Bump. Pics will be added tonight.

The following are off the car and can ship next week:
EFR turbo Kit
ECS Q5 brake upgrade with 2 piece rotors
Eurocode Front and rear sway bars with End links
APR turbo back quad tip exhaust
034 Oil catch can
OEM Q5 intercooler
Eurocode intercooler kit
Eurocode Alukreuz stabilizer
OEM brushed aluminum trim set
White OZ Alleggeritas with Hankook Ventus v12 (less than 5k miles)

Priority to pickup. buyers pa actual shipping costs.

[waxxonMTL]

pm'ed. Btw, forgot to ask, will you be removing the diff mount and tranny mount ?

[diego_demarco]

Would love to see some more pics of the brakes please! :)

[Jerry1847]

[Attachment 22715Attachment 22716Attachment 22717Attachment 22718Attachment 22719

Sent from my Nexus 7 using Tapatalk

[Jerry1847]

Attachment 22720Attachment 22721Attachment 22722Attachment 22723

Sent from my Nexus 7 using Tapatalk

[Jerry1847]

Attachment 22724Attachment 22725Attachment 22726Attachment 22727Attachment 22728

Sent from my Nexus 7 using Tapatalk

[Smellie]

Price for front and rear sway bars?

[waxxonMTL]

sent you a pm a couple days ago. still waiting to buy lol !

[zokissima]

Waiting on that intake manifold :)

[PBKIDD24]

PM me a price on the EC intercooler and sways shipped to 07932. Thanks!

[Carlos74]

PMed you on 3/12 about the swaybars and end links... just FYI

[Jerry1847]

All, sorry for any delayed replies. Have been swamped the last week. Will respond by this weekend, hopefully sooner.

[heatseeker23]

All, sorry for any delayed replies. Have been swamped the last week. Will respond by this weekend, hopefully sooner.

PM'd on quad valance as well. Can submit payment once confirmed still available? :)

[Jerry1847]

BUMP - Updated parts list

[zcspec]

Jerry, I texted you last week but no response.

[rahip4567]

is the exhaust still available? PM me if it is.

[vic06b]

What's left and what are the prices?

[lettuce]

Oh man, whoever bought the EFR show yourself. I need a build thread to subscribe to.

[PBKIDD24]

I pm'd you about the FMIC but never got a response, is it still available?

[Jerry1847]

All, sorry if I didn't respond. Trying to wrap up my divorce over the last few weeks.

Will update the list today.

Exhaust and fmic still available. The IE intake manifold came off today and is for sale also. Also have a GFB dv+ for sale.