Billet k04s ftg 025/026x with inlets

[NJNOGGY]

I ran these turbos for exactly 500 miles while breaking in my new clutch. I decided to upgrade to k24s due to the fact that I just did rods and 2.8 heads. I never went over wastegate pressure which was 8-9 psi. And that was only a few times for the last 100 miles that I was driving the car. These retail for 1800 with inlets which are included. These were purchased in June and still under warranty.
price is $1500

Also a boost reference line on one turbo had some messed up threads from ftg so I am including 2 new compressor housings that he sent to me.

I would like to sell these quickly as I found k24s I want to run. So I'll throw in a bonus.
I have Bosch 550 injectors with 500 miles on them and also xs down pipes.

For $1800 I will include the injectors and down pipes.

I have pictures and I can take more after work today. My number is 732-804-0813. Text me for more pictures and serious inquiries only please!

Located in brick nj. I would prefer to sell locally. But shipping can be arranged at the buyers expense.
Thanks

These will only be for sale for 2 weeks, after that they are getting installed back on my engine.

[IMG][/IMG]
[IMG][/IMG]

[vavJETTAw36]

Lol what? You pulled them at 500 because you decided "ah you know what I just feel like going k24". But if I don't sell them in two weeks, for the fuck of it, I'm going to put them back on my motor. Doesn't add up. Why do you only have one post?


Sent from my iPhone using Tapatalk

[NJNOGGY]

I went to these turbos when my car hit 114xxx miles. I replaced my clutch and did all supporting mods to make full use of them. After 500 miles I sprung a few oil leaks, I then proceeded to pull my engine. While it was out I decided to do forged rods and I built a set of 2.8 heads. Now that i'm capable of handling a little more power I decided to upgrade to larger turbos. In 2-3 weeks id like to get my engine back in so if there not sold by then, i'm putting them back on and and ill run them till next summer / fall.
There's nothing wrong with them, I'm sure ill be more than happy making 500+ hp. I have friends making some really good power on similar FTG turbos and even bigger ones. At the time I wanted to be safe on my rods, now its not as big of a deal. Which is why id like to go bigger, but not at the expense of waiting even longer to drive my car

[S4KARL]

Ifoure willing to sell the downpipes alone I might be interested

[NJNOGGY]

If someone buys the turbos and doesn't want the down pipes or injectors, then they will be for sale.
Thanks for the interest

[filipin0_vr6]

If you're breaking it up, I'd be interested in the injectors

[NJNOGGY]

Make me an offer!! Worst I can say is no

[NJNOGGY]

Who wants to go fast!?

[NJNOGGY]

Ok price drop because I found the turbos I want. I'm $1500 away from the turbos I want to buy. So $1500 gets everything listed. That's a hell of a deal. These a built well and show no wear. Made my the same manufacture of other companies turbos.

[NJNOGGY]

Turbos still available, I bought my k24s so these are spares now. I will also sell the injectors separate now

[Austonwerner4]

Good luck selling with the FTG fiasco going on.

[NJNOGGY]

I know it's a shame people associate the quality of a turbo to the dealer where they came from.
These are made by the same manufacturer as srm and Frankenturbo among others.

[S4KARL]

Still have the downpipes? If you do what size are they?

[NJNOGGY]

3 inch to 2.5 inch v band. For rs4 k03/k04 turbos.

[xwilliams23]

3 inch to 2.5 inch v band. For rs4 k03/k04 turbos.

I'm interested in these dp's. If shipping wasn't so expensive for the turbo's. I'd take them right now (I'm in canada)

[NJNOGGY]

If you're interested in anything please pm me. And we can work out a deal :)

[NJNOGGY]

Price drop.
I'll sell the turbos injectors and downpipes for $1500 :) as a package
$1300 for turbos and inlets
$200 for injectors
$100 downpipes.

[CJ_]

Are dps dual flange for k04/k24 by chance?

[NJNOGGY]

I may be wrong but I believe K03/k04 is rs4 flange, and k24 is rs6. What I know for certain they do not fit on my k24s.

[NJNOGGY]

Ok well these are for sale a little cheaper once again because xspower is now selling them cheaper than ftg did. My loss your gain.
$1400 complete package
$1200 turbos with inlets
$200 injectors
$100 downpipes

[DieselElectric]

I know it's a shame people associate the quality of a turbo to the dealer where they came from.
These are made by the same manufacturer as srm and Frankenturbo among others.

I hate to go all Flyboy on you, but can you post evidence for this claim?

Also, BorgWarner's could be built at the same factory, doesn't mean they are equal.

[NJNOGGY]

If you do some research online, you'll see that they all get their turbos manufactured by xspower or at least from the place they get theirs from. Srm also just posted that on a b5s4 page on Facebook that they get their turbos from xspower when people had this same conversation last week.

[FlyboyS4]

I hate to go all Flyboy on you, but can you post evidence for this claim?

Lol.

[jaychen]

I hate to go all Flyboy on you, but can you post evidence for this claim?

Also, BorgWarner's could be built at the same factory, doesn't mean they are equal.

you're now known as jeff B.

[Zba]

If you do some research online, you'll see that they all get their turbos manufactured by xspower or at least from the place they get theirs from. Srm also just posted that on a b5s4 page on Facebook that they get their turbos from xspower when people had this same conversation last week.

Don't make us search, if you know exactly where this info is please post it. Quick search netted nothing besides some ******************* garbage

- - - Updated - - -

Don't make us search, if you know exactly where this info is please post it. Quick search netted nothing besides some ******************* garbage

Wtf, can't write Audi revolution dot net?

[NJNOGGY]

the owners of a few companies have stated that they get their turbos from that supplier. If you follow those posts you'll see the info. I'm just stating that the information is out there. If you also research these turbos and many other people build threads, you'll see the quality is there. Im running the same companies turbos on my car now, I just upgraded to k24 hybrids so I don't need the k04s right now. If I end up keeping them, someone will just force me to build another s4 to daily ;)

[NJNOGGY]

Monday bump