Ttrs front brakes on b5 s4

**S4tech2** · 09-26-2013 04:21 PM

So I have acquired a complete front brake kit to include calipers, carriers, roters, pads bolts everything but lines. Has anyone ever seen or heard of 2013 ttrs brakes on a b5 s4? The rotors measure 370 mm and the calipers are 4 pot brembos. Don't ask how I got them but I was I was tickled to death thinking, bbk for s4! Any help would be appreciated.

**coolgraymemo** · 09-26-2013 04:28 PM

I don't think I've ever heard of it. Have you compared bolt spacing to see if they bolt up?

**S4tech2** · 09-26-2013 05:15 PM

I have not, I just got them today and have been too busy to try test fitting.

**s4avant87** · 09-27-2013 11:15 AM

Did you acquire these from the recent ttrs caliper campaign? lol

**Triple8Sol** · 09-27-2013 11:29 AM

Obviously ^

I'm def interest to know how to make that work as well...

**Sole_** · 09-27-2013 12:14 PM

Haha so awesome I just got them aswell.

**S4tech2** · 09-27-2013 12:24 PM

Aaahh trying to keep it low pro! It's cool though I don't know how they would fit, the rotors are 370mm but as far as the holes for the calipers go I don't know. It may be a week or so before I try test fitting I don't have much time anymore.

**s4avant87** · 09-27-2013 12:33 PM

I honestly don't think these will fit without heavy modification. Being that you most likely picked these up for free, give it a shot. I doubt anyone on the forums has tried it yet though.

**S4tech2** · 09-27-2013 12:41 PM

So I got to thinking I have an a6 in the shop with Alcon 332 bbk so I pulled the wheel off and did some rough measuring, the carrier looks like it would bolt up to the upright, but you would have to use the ttrs rotors which I'm thinking are expensive and the ones I have are warped. So I thought maybe the caliper carrier for like a 332 kit may work but the Alcon setup that I'm looking at makes it look like the bolts from the caliper to the carrier won't line up.

**s4avant87** · 09-27-2013 12:48 PM

If i come across any rotors I will contact you. I can pretty much grab any set that comes in that gets this campaign done. Like I said if it is possible, it's certainly going to require modification since its a retrofit setup.

Originally Posted by S4tech2

So I got to thinking I have an a6 in the shop with Alcon 332 bbk so I pulled the wheel off and did some rough measuring, the carrier looks like it would bolt up to the upright, but you would have to use the ttrs rotors which I'm thinking are expensive and the ones I have are warped. So I thought maybe the caliper carrier for like a 332 kit may work but the Alcon setup that I'm looking at makes it look like the bolts from the caliper to the carrier won't line up.

**NOTORIOUS VR** · 09-27-2013 12:54 PM

Originally Posted by S4tech2

Don't ask how I got them

I know how you got them ;)

**S4tech2** · 09-27-2013 12:58 PM

Haha I hear y'all man the master tech I work with got excited as all get out he was like campaigns don't ask them back and that's all it took.
S4avant87 where are you located? I'm guessing many of y'all have seen this campaign. Lol

**s4avant87** · 09-29-2013 09:16 AM

In PA. I will keep an eye out I don't have any right now.

Originally Posted by S4tech2

Haha I hear y'all man the master tech I work with got excited as all get out he was like campaigns don't ask them back and that's all it took.
S4avant87 where are you located? I'm guessing many of y'all have seen this campaign. Lol

**Fourplay** · 09-29-2013 09:45 AM

Originally Posted by S4tech2

Haha I hear y'all man the master tech I work with got excited as all get out he was like campaigns don't ask them back and that's all it took.
S4avant87 where are you located? I'm guessing many of y'all have seen this campaign. Lol

They won't fit without some custom work. I was in on this campaign as well. They do squeal like bastards though, so you'd have to deal with that. There's a legitimate reason for the replacement lol.

**97B518TQM** · 09-30-2013 08:25 AM

So that's why there were some TTRS calipers floating around on ebay for $250 BIN price...

And speaking of trying different brakes, anyone want to volunteer to try these out :) ;
http://www.ebay.com/itm/Audi-A7-S7-R...937289&vxp=mtr

**Austonwerner4** · 09-30-2013 08:28 AM

What about the 345mm golf r calipers.

**Fourplay** · 09-30-2013 11:13 AM

Originally Posted by Austonwerner4

What about the 345mm golf r calipers.

18Zs are cheaper, direct bolt on, and have more pistons/swept disc area.

**DiscoPotato** · 09-30-2013 11:36 AM

Originally Posted by Fourplay

18Zs are cheaper, direct bolt on, and have more pistons/swept disc area.

Yup

**S4tech2** · 10-02-2013 04:09 PM

I don't know how to put a picture up but they fit! Minor modification to the rotor for it to fit the hub and remove dust shield and new lines but that's it.

**getslideways** · 10-02-2013 09:24 PM

Originally Posted by S4tech2

I don't know how to put a picture up but they fit! Minor modification to the rotor for it to fit the hub and remove dust shield and new lines but that's it.

you, my friend, are a tease lol

here is a brief (albeit old) walkthrough on using photobucket to post pictures on forums:
http://ultimatecarforum.com/smf/index.php?topic=1556.0

**coolgraymemo** · 10-02-2013 10:47 PM

Originally Posted by S4tech2

I don't know how to put a picture up but they fit! Minor modification to the rotor for it to fit the hub and remove dust shield and new lines but that's it.

Bolt on?

How big are the rotors?

This is good news.

**Shhmaudi** · 10-02-2013 11:07 PM

posting to find my way back

**S4tech2** · 10-03-2013 05:24 AM

Rotors are 370mm and brembo 4 piston monoblocks. I will try to post a picture. They barely fit under my 18s, but fill them up in a good way.

**S4tech2** · 10-03-2013 05:27 AM

Getslideways that was a good link but any easier way to post with my iPhone since that is what I get on here with and have the pictures on.

**ss7seven** · 10-03-2013 08:01 AM

**S4tech2** · 10-03-2013 08:09 AM

There we go! Thanks ss7seven, now y'all can't say that don't look sick as all get out.

**A62TURBO** · 10-03-2013 08:11 AM

Too bad those wheels look like shit

**wbrunner23** · 10-03-2013 08:30 AM

Originally Posted by A62TURBO

Too bad those wheels look like shit

They look fine to me

S4Tech2, when will you be able to get my cheap set in the mail (I'll pay shipping of course)?

**joe@vwvortex** · 10-03-2013 08:38 AM

Originally Posted by wbrunner23

They look fine to me

I have a set as well as my track wheels. They weigh 18.9lbs each and are made by Enkei for Tire Rack. Really solid well built wheel for the $. I will be selling my set now though as I went to a widebody and need 9.5's.

**S4tech2** · 10-03-2013 09:50 AM

Thank you and considering I got the set for basically $300, I'm not complaining.

**MileMan402** · 10-03-2013 09:59 AM

how can I get my hands on a set of these...I know someone who can make brackets

**Gaki** · 10-03-2013 10:04 AM

Originally Posted by S4tech2

Thank you and considering I got the set for basically $300, I'm not complaining.

way cheaper than what I put together.

**S4tech2** · 10-03-2013 10:23 AM

Mile man 402 you would have to find someone at a dealer to hook you up after the campaign is performed. And yes these wheels are $300 a piece.

**wbrunner23** · 10-03-2013 10:43 AM

Originally Posted by S4tech2

Mile man 402 you would have to find someone at a dealer to hook you up after the campaign is performed. And yes these wheels are $300 a piece.

Can you post up a side view of the entire car with these wheels/calipers?

O, and you forgot to answer my question about finding me a set of campaign TTRS brakes

**S4James** · 10-03-2013 11:27 AM

so they fit with the TTRS rotors, direct bolton eh

good to know. i also can get a set. :)

**wbrunner23** · 10-03-2013 11:57 AM

Originally Posted by S4James

so they fit with the TTRS rotors, direct bolton eh

good to know. i also can get a set. :)

O, come on! Somebody hook it up!

**Brettnz** · 10-03-2013 12:03 PM

So what is required to put the caliper on?

**S4tech2** · 10-03-2013 12:44 PM

I probably can't get another set only 2 known ttrs's down here. Like I said the only modification is wallowing out the center of the rotor to make it fit on the hub, remove the dust shield and get some brake lines to work. Other than that direct bolt on. I cannot get a side view now only had brakes on for test fitting.