Lot's of Audi Performance parts, wheels, tires and more....

[_Lex_]

somebody gave these to me years ago for helping them out with their car... been sitting in my garage ever since.. never used

Sent from my SGH-T989 using Tapatalk 2

[SomeDayAS4]

have never seen those before dont think my car would pull them off haha.
do you have normal facelift b5 tails from your other parts cars?

[_Lex_]

haha.. yeah they are hidious... ill probably tint them red so I can actually get rid of em or donate them to goodwill... lol

I have facelift tails.. 120 for the pair

Sent from my SGH-T989 using Tapatalk 2

[AudiForeman]

Lex this is Carter (laser b5 s4 w/tials). Still have axles? And I might be interested in the facelift tails for my pre-facelift a4

[_Lex_]

yep axles are still here.. and let me know about the tails....

you off the base tune yet?...... turn.. that.. shht.... UP!!!!

[_Lex_]

List Updated...
------------------------------------------------------------------------------------->

Lot's of Audi Performance parts, wheels and more....

5x112 Wheels will fit Audi, VW, Mercedes & more makes with adapters..

iForged 20" Daytona 5x112: $1400 wheels only
20x8.5 et 32 (2.5") lip
(wheels sell for 3500 a set)
http://www.iforged.com/v8/index.php?act=home
one wheel had a light crack and was repaired

iForged 20" Neo's 5x112: $1600 wheels only
front: 20x8.5 et32 (2.5" lip)
rear: 20x9.5 et 37 (3.5") lip
(wheels sell for 3700 a set)
http://www.iforged.com/v8/index.php?act=home


OZ Ultraleggra HLT 20" 5x112: $700 wheels only (2 wheels minor bends still hold air)
http://www.ozracing.com/car_wheels_v...HLT/25494.aspx
(wheels sell for 2700 a set)

Team Dynamic 18" 5x112: $400 (2 wheels bent need repair other two have tires)
http://www.rimstock.co.uk/rimstockusa/homepage.php

(4) BF Goodrich G-Force T/A 255/30/20 85% Tread: $450

(3) Falken 452's 235/30/20 85% Tread: $125 Each

(2) Yokohama Advan Sport 255/30/20 70% Tread: $125 each

KW V2 Coilovers for C5 Allroad / A6 Avant / S6 Avant: $900
http://www.kw-suspension.com/us/kw_variant_2.php

Hotchkiss Sway Bars (Front/Rear) for C5 Allroad / A6 Avant / S6 Avant: $400
http://www.hotchkis.net/audi_allroad...set_black.html

C5 Allroad 2.7t Giac X-Chip M-BOX ECU:
http://www.giacusa.com/

C5 Allroad 2.7t APR Stage 2+ All ECU:
http://www.goapr.com/

(2) APR R1 Diverter Valves: $100 each
http://www.goapr.com/products/r1.html

(2) Stratmosphere Hyperboost Diverter Valves: $85 each SOLD

(2) B6 1.8t manual radiator support (New) $100 each

(2) k03 turbos off 2.7t with 60k miles: $200 each

(2) k03 turbos off 1.8t with 50k and 80k: $200 each

(1) Blown GT3076R T25 Needs new CHRA: $300 SOLD

(1) JHM Front Mount Intercooler Core semi polished $275

(1) Apikol Rear Diff Mount for B6/B7 A4/S4/RS4 (only ran for 4k miles): $200 SOLD

(1) Apikol Snub Mount for B6/B7 A4/S4 (New) $25 SOLD

(1) Set for B5 S4, C5 Allroad/S6, B6/B7 A4/S4 (NEW) Stoptech rear rotors with (New) Stoptech rear stainless steel lines: $300
http://shop.achtuning.com/StopTech-1...udi-B7-S4.aspx
http://shop.achtuning.com/StopTech-9...udi-B7-S4.aspx

(1) Set 355 Stoptech BBK for B5 S4, C5 Allroad/S6, B6/B7 A4/S4 (Calipers, Rotors, Pads, SS Lines) ran for 10k miles: $1850
http://shop.achtuning.com/stoptech-8...udi-b7-s4.aspx

Cayenne / Toureg brembo 6 Pot bbk: $850 obo
2Bennett 6pot brembos: $1250 obo
C5 RS6 Front bbk $1350 obo

B5 A4/S4 front axles R+L (new): $100 each

B5 A4 gauge cluster auto - $50

(2) B5 S4 gauge cluster manual - $200

B5 S4 Nogaro Doors (4) $175 Each

B5 S4 Nogaro Trunk $150

B5 S4 Laser Doors (4) $175 Each

B5 S4 Laser Trunk $150

B5 S4 Black Doors (4) $175 Each

B5 S4 Black Trunk $150

B5 S4 Silver Doors (4) $175 Each

B5 S4 Silver Trunk $150

B5 S4 Silver Hood $200

B5 S4 OEM Clear Corner Headlights $300

(2) B5 S4 Black Seats front & Rear: $600

C5 Allroad Black & Grey Seats Front & Rear: $500

C5 A6 Black Seats Front & Rear: $500

(4) B5 S4 / C5 A6 / Allroad 2.7t Engines - $1300 w/ core
(2) B5 1.8t Engines - $1200 w/core
(1) B6 1.8t Engine - $1500 w/ core

(2) B5 S4 01E 6 speed transmission $1000 w/core

2003

(2) B6 A4 belly pan: $40 each

B5 A4/s4 arm rest broken top: $20

B5 A4/s4 snowboard rack oem: $150

B5 A4 Black pref leatherette seats front & rear drivers seat has usual tear: $150

B5 A4/S4 Clear euro taillights (new never used): $75

(2) B6/B7 A4/S4 bumper struts 50 each

B6 A4/S4 Bumper support: $50

B6 Oem snowboard rack: $175

B7 A4 oem rubber mats: $80

B7 A4/S4 plate filler: $50

C5 A6/Allroad/S6 Hood latch: $25

C5 A6/Allroad/S6 bumper strut: $50

Allroad: Black Driverside fender, (4) Doors, black & grey interior (mint) - Call
C5 S6: Black Driver & Passenger Fenders, (4) Doors, Hood, Front and rear Bumper, Trunk, Headlights & Tail lights - Call
B6 S4: Black Driver & Passenger Fenders, (4) Doors, Hood, Front and rear Bumper, Trunk, Headlights & Tail lights - Call

ECS 5x100 5x112 5mm Spacers: $35 SOLD
H&R 5X100 5X112 5mm Spacers: $40 SOLD
H&R 5x100 5x112 10mm Spacers: $60 SOLD
H&R 5x112 30mm Spacers with stud conversioin: $100

---------------------------------------------------------------------------------------------------
Full Turbo Kit for Audi/VW 1.8t:
Custom Eurocode/APR Stage 3++ Kit for Transverse 1.8t (will not seperate) $5500 (Makes 450whp on pump 516 on race on Built Stroker Motor) Must have built motor for this tune (28-32+ psi).. can be ran on stock motor with a different tune
http://www.ecodetuning.com/
http://www.goapr.com/

apr intake maniflod
http://thmotorsports.com/i-222637.as...ingSeanVehSpec

Custom One off ER Frontmount Intercooler
http://www.evolutionracewerks.com/

Custom Eurocode/APR ECU Tune w/ 3 Files
http://www.ecodetuning.com/

apr exhaust manifold
Garrett GT2871R
Walbro 255 & Apr inline fuel pumps
550cc & 880cc injectors
5 Bar FPR
APR MAF Housing
R32 MAF
Custom Piping
3" Downpipe
---------------------------------------------------------------------------------------------

I can install anything listed for extra $$

If anyone needs any work done let me know... I can do anything, doesn't matter what model or motor.. I've worked on everything.
building or rebuilding motors, trannys, suspension, brakes, electrical, bodywork.. whatever you need..

[AudiForeman]

Cars going into auto sport werks on Friday next week to crank the boost and lay powa lol. Passenger side bank is smoking, i think a valve seal didn't correctly or something and it needs a once over to get fixed. Let's get a pull in before the snow hits hard.

[_Lex_]

^how much smoke?.. oil consumption?....

[AudiForeman]

Only smokes at ideling once everything is warm, drive it no smoke, let ideling again after driving and starts smoking. No oil or coolant is being consumed.

[_Lex_]

If the smoke is coming out of the bay it's your valve cover gasket..

[Prospect25]

You found a lot of goodies the other day

[vdubjetta02]

what are the dimensions of your 18" TDR wheels?

I'm not even sure where to get the bends fixed at...

[Operator]

what are the dimensions of your 18" TDR wheels?

I'm not even sure where to get the bends fixed at...

Here in Wellington....................

[philthyphil]

Only smokes at ideling once everything is warm, drive it no smoke, let ideling again after driving and starts smoking. No oil or coolant is being consumed.

Carter, I was gonna mention it to you but forgot. There is some smoke while your driving but it looks like it's more on decel, it's not pouring out just kinda seeping up out of the exhaust. I noticed it when we were driving through Blackhawk.

[vdubjetta02]

Lex, you inbox is full.... get back to me on the TDR wheels when you can

thanks,

[_Lex_]

2bennett 6pot brembo: $best offer


Sent from my SGH-T989 using Tapatalk 2
RS6 brakes: $best offer


B5 S4 2 Piece catback exhaust $300

[vdubjetta02]

LEX.... still have 18x9 team dynamics wheels?

[seal66]

What did the rs6 brakes come off of?

Also can those kw v2's fit a b6 a4

[mec]

I would assume they came off of an rs6. Kinda pricey though, $1000 usually gets you front and back rs4 brakes, basically Lamborghini brakes, I'm not sure how they compare to the rs6 brakes

[AudiForeman]

Thanks Phil, its comming out of the passenger side exhaust out the rear. I guess the one good thing from paying big bucks to have someone build your motor is the fact a warranty is included. It might be burning a drop of oil but never enough to show up on the dip stick. I'll be stopping it off this weekend for the entire week next week and the cramming boost up to 30psi lol

[Greedo]

Also can those kw v2's fit a b6 a4

Different suspension setups.

[_Lex_]

LEX.... still have 18x9 team dynamics wheels?

Yes I do.. thought I sent you a message the first time you asked..

What did the rs6 brakes come off of?
Also can those kw v2's fit a b6

A Rs6... And I have the motor forsale too.. Haha

And yeah the coils are different setups for the C5 & B6

[vdubjetta02]

I never got the message... Can you send pics to [email protected]

I will take these off your hands

[seal66]

I figured an rs6 but what year. They made the rs6 in both the b6-b7 models correct?

[mec]

rs6 was not b6 b7 that is only for the model "4" cars, but the rs6 was a c5, similar to the model "6" cars. I believe the rs6 was only made one year in the US for 2003, possibly 2004 i dont remeber

[philthyphil]

It was only a 2003 model. Badass none the less.

[mec]

Badass minus the transmission and the ridiculous timing belt intervals

[seal66]

I know it's not a 4 Model I just didn't know why year it was made. I am wondering it the takes well fit a b6 or b7 though

[TipsyTurtle]

pm box full

[_Lex_]

Calipers bolt right up..

Rs6 timing belts are easy... 01E w/ adapter plate takes care of the tranny problem...

But enough of this small talk... haha

Sent from my SGH-T989 using Tapatalk 2

[_Lex_]

pm box full

Its always full.. Somebody needs to give me more space for messages..

Call me and If I dont answer my phone its because im busy.. So leave me a message or text me...




Sent from my SGH-T989 using Tapatalk 2

[seal66]

That's just the front setup right? Your asking. 1k?

[Greedo]

I know it's not a 4 Model I just didn't know why year it was made. I am wondering it the takes well fit a b6 or b7 though

The 6 series was C classed platforms. The only RS6 to come to the states was the C5 RS6.

[_Lex_]

That's just the front setup right? Your asking. 1k?

Yep.. You gonna buy em?

Sent from my SGH-T989 using Tapatalk 2

[Greedo]

Put the RS6 motor in my avant. It would be one step in building my ultimate avant.

[_Lex_]

One step?.. Ha.. More like the only step....



Sent from my SGH-T989 using Tapatalk 2

[Greedo]

Oh it's one step. I have a master plan of the ultimate avant.

[vdubjetta02]

LEX, sorry to be a PITA, but I still have no messages. Can you PM me your phone number so we can discuss TDR wheels

thanks,

[philthyphil]

Here are his numbers

3033196166/7209333356

[seal66]

I was looking at buying them if they are a direct fit and in good condition.