Crankshaft bolt

[blak21]

Hey guys, i'm new here to this forum. Nice to find a b6 forum that's still active. I gotta solicit some help here. Ive got a 2003 a4 1.8t and I was fortunate enough to have a bolt come loose and completely screw my crankshaft gear(gear behind pulley). I've got all new bolt, made my tool to hold the crank still while I get the bolt off. That bolt is a bitch! Ive broken two drives and it still hasn't budged. Does anyone have any suggestion, secrets or magic spells I need to say to get this damn bolt off! Any help is greatly appreciated.

[DonnieDark0]

your defin in the wrong part of the forum, Barely any people roam the tech parts. Try the general B6 forum. should be some fellas in there to help

[blak21]

thanks

[Crispy222]

auto or manual? Photos of carnage? Did it mess up the timing belt? Are you replacing the timing belt?

[jedge1.8t]

I had to deal with this, i had to torch it up for awhile to breakdown the locktite, then used a ingersol impact wrench, if you dont have air wrench use a very, very long breaker bar supported on a axle stand or something