Audizine - An Automotive Enthusiast Community

Results 1 to 40 of 389

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Veteran Member Four Rings BlkdoutS4's Avatar
    Join Date
    Jun 22 2007
    AZ Member #
    19001
    My Garage
    2001.5 S4
    Location
    Santa Cruz, Ca

    BlkdoutA4's RS6-R Build Thread

    Well I guess I'll start a build thread...

    Story so far:

    I've had my 2001.5 Silver S4 for about 3 years now.. bought it bone stock with 95k miles on it. By 110k miles it was full stage 3, with a custom tune from JHM, running meth, put down just over 400whp on 034's dyno. A few months ago I started having some smoking issues during decel along with some oil burning. Tried a bunch of fixes to no avail, most likely culprit was the valve stem seals leaking. So I decided to pull the motor. Started a few weeks ago (first motor pull), and I have another car to drive so I just took my time. As of last Sunday, the motor is out and I have started to break down the motor.

    Turbos have been selected and paid for... should be here within a few weeks and they aren't 605s.

    Engine size: 2.7L
    Rods: Stock
    Pistons: Stock
    Heads: 2.7 w/new guides, new valve stem seals, valve job
    Cams: Stock
    Valvetrain: Stock
    Intake Valves: Stock
    Exhaust Valves Stainless Supertech
    Intake Manifold: Stock, 034 Phenolic Spacers
    Intake: RS4 Airbox, RS4 accordian, K&N panel filter
    Y-Pipe: Stock
    Throttle Body: Stock, 034 TBB
    Diverter Valves: 034Motorsport
    Turbo kit: JHM RS6-R
    MAF: 90mm
    Fuel Rails: Stock
    Fuel Pump: Bosch 044
    Spark Plugs: NGK BK7RE
    Coil Packs: 034 2.0T conversion kit
    Injectors: Custom Bosch 650cc EV14s
    Tune: JHM
    Water/Meth Injection: VAST
    Clutch: VAST Stage 3
    Intercooler(s): JHM FMIC
    Mounts: 034 snub, 034 Track Density motor and Street Density tranny
    Exhaust Manifolds: Stock
    Downpipes: 034 3" downpipes w/ high flow cats
    Exhaust: APR stealth
    Coil-overs: ST
    Wheels: 18X8 B6 S4 Avus'
    Tires: 225/40/18 Hankook Ventus V12
    Front Brakes: 330mm 6 Pot Brembos off Touareg, MB rotors, SS lines, Hawk HPS pads
    Rear Brakes: 300mm B7 S4 rotors, 034 bracket, SS lines, Hawk HPS pads
    Miscellaneous: VAST/ARD 2.2" Polished Bi-pipes, JHM Short shifter + weighted knob, Red oCarbon interior trim, Momo EVO RS GT seats, Euro rear bumper, Podi boost gauge, LC-1 Wideband, powdercoated valve covers

    The car before the motor pull began:







    Momo seats:



    ST coilovers:





    Garage:



    Motor pull:

    Mom's BF helping me out


    Me:







    Old K04s (25k miles):







    Last edited by BlkdoutS4; 05-16-2012 at 10:32 AM.
    '01.5 Silver B5 S4 - Follow my build here: http://www.audizine.com/forum/showth...4-Build-Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.