Tri-State Section VAG-COM Owners

**elite-fusion** · 08-13-2014 04:42 PM

come by NJ and I can help out :)

**Ryan516** · 09-17-2014 03:33 PM

Im located in Valley Stream, i have been to hell and back diagnosing a CEL/Misfire?/Limp mode at idle only issue. Have done a ton of basic maintenance.

I have been scanning with a generic scan tool, i need to finally use a vag com, anyone available in Nassau county this evening?

Thanks!

Ryan

**shonseb** · 09-17-2014 05:21 PM

I can help both you guys out, located in Douglaston. But my next free day will be Sunday afternoon to Monday afternoon. If any of those days work, PM me.

**1_clean_Audi** · 09-17-2014 07:15 PM

Anyone around the 08110 area?

**DoctorB8** · 09-17-2014 09:25 PM

Originally Posted by 1_clean_Audi

Anyone around the 08110 area?

I'm in New Brunswick every day. Shoot me a pm

**TCroooks** · 10-07-2014 05:05 PM

Also located in Valley Stream looking to get some simple things done like windows down and up from remote as well as needle sweep.

**elite-fusion** · 10-07-2014 05:37 PM

Originally Posted by TCroooks

Also located in Valley Stream looking to get some simple things done like windows down and up from remote as well as needle sweep.

Come by NJ, right by GWB I can assist :)

**TCroooks** · 10-08-2014 01:20 PM

Originally Posted by elite-fusion

Come by NJ, right by GWB I can assist :)

I'll be in NJ tonight doing a shoot for Mode Carbon by the tapanzee if you are available I'd be down to come through haha

**elite-fusion** · 10-09-2014 09:49 AM

Originally Posted by TCroooks

I'll be in NJ tonight doing a shoot for Mode Carbon by the tapanzee if you are available I'd be down to come through haha

Crap dude, sorry i missed you yesterday lol
When are you going to be around doing another shoot in the area? just let me know in advance and I will see if I can move some stuff around. I am usually only available during evenings or on some weekends throughout the day.

**TCroooks** · 10-09-2014 09:52 AM

Originally Posted by elite-fusion

Crap dude, sorry i missed you yesterday lol
When are you going to be around doing another shoot in the area? just let me know in advance and I will see if I can move some stuff around. I am usually only available during evenings or on some weekends throughout the day.

Possibly shooting the same same company again this weekend for their new rear valence piece. Either friday or saturday I believe.

**elite-fusion** · 10-09-2014 10:01 AM

Originally Posted by TCroooks

Possibly shooting the same same company again this weekend for their new rear valence piece. Either friday or saturday I believe.

Saturday in the day would be better for you to come, if possible.

Is it a B8.5 valance by chance? or are they called diffusers and not valances lol

**TCroooks** · 10-09-2014 10:05 AM

Originally Posted by elite-fusion

Saturday in the day would be better for you to come, if possible.

Is it a B8.5 valance by chance? or are they called diffusers and not valances lol

its for the new M3's, diffusor, valence whatever it is its a rear lip type product haha

**elite-fusion** · 10-09-2014 10:15 AM

Originally Posted by TCroooks

its for the new M3's, diffusor, valence whatever it is its a rear lip type product haha

Ah gotcha lol well i just got out of the BMW world, we'll see in 3 years if I will go back, or stick with the Audi crew, or even MB crew lol

**djsnowman777** · 10-20-2014 03:45 PM

Queens NYC
Ross Tech Vagcom
text me 917 376 0833 if you need help. I work at night so I am free during the day.

**RTW S4** · 11-03-2014 12:06 PM

Possibly need some VAGCOM help for my cluster SAFE mode issues in Weehawken NJ (near Lincoln Tunnel). PM me if interested or see my thread in the main B6 S4 Forum. Thanks http://www.audizine.com/forum/showth...ious-help-here

**rbrady** · 12-19-2014 02:55 PM

Anyone around 315 area, specifically watertown, adams, fort drum area? I just got a 2000 a6 2.7t I need some help removing some lights and coding my remote. Please email me [email protected]

**shonseb** · 12-20-2014 01:01 AM

I'll be in ogdensburg next week till Sunday. I'll bring my cable with me, just find the coding needed.

**rbrady** · 12-20-2014 07:41 AM

I really appreciate it, my turbos are needing to be replaced so that may be a little far for me. Once again I really do appreciate the offer though!

**shonseb** · 12-22-2014 04:01 AM

No worries, I come there at least once a month

**oascom** · 12-22-2014 10:38 AM

Anyone who need help in Princeton / Lawrenceville NJ I got vagcom and can help if needed.

**DownhillA4** · 12-24-2014 11:18 AM

I'm located in Sussex County, NJ and can assist anyone with Vag-Com needs. Just PM me. I have the full-setup that can perform tasks on any Audi/VW.

**jaepeiso** · 12-31-2014 06:55 PM

whats up guys, Im in need of some VAGCOM service for a xenon conversion on my B8.5. Im located in West New York, NJ and offering anything from lunch to some cold ones or some cash for your time!

**jeepbrahh** · 01-18-2015 08:40 PM

I have a VCDS Vag Com Wire Cable HEX CAN for lending/borrowing. I live in Northern Westchester near Yorktown NY New York. Near Putnam, Dutchess, Rockland county counties. Send me an email at [email protected] if you want to contact me

**fx_warrior** · 01-31-2015 02:08 PM

Danbury, Patterson NY, New Fairfield, or anywhere else in close proximity to Patterson NY.

Need Vag-com help setting readiness codes for NY state inspection have notorious p0741 cel on my roommates car, I can clear the codes but need readiness codes reset so she can pass emissions... don't drink but will pay you and you can buy the beers yourself! lol.

04 A4 will take 10-15 minutes from what i hear, will pay $40 for your time.

Can contact me at [email protected] or 914 589-2089

**3.0T** · 02-18-2015 12:38 PM

Anyone near Danbury CT willing to help? Looking to unlock the hidden menu unlock and VIM. Thanks!!

**homelessNY_LI** · 02-18-2015 04:01 PM

Originally Posted by 3.0T

Anyone near Danbury CT willing to help? Looking to unlock the hidden menu unlock and VIM. Thanks!!

If you ever take the ferry i'll close by port jeff

**booost** · 02-19-2015 06:42 AM

I'm in Stamford, I'll do coding for beer!

**Guzman** · 02-23-2015 07:08 PM

I'm in Rockland County (new city to be exact) and looking for someone with a VAG-com to help me get the windows down with remote and door locking at 10mph features on my car. Will pay $40.

shoot me a text 845 six six two 79 five three

**VisionPaintball** · 02-26-2015 08:01 AM

Monmouth County. I have a b5 s4. Who can meet today or tomorrow? Need codes read.
thanks
rich
732.239.2723

**VenturiRS** · 03-09-2015 06:13 AM

B8.5 S4, I'm either in Danbury CT, or Lower Westchester/North Bronx.

Would like some VAG COM mods done to my car. Windows, LED %, hidden menu etc... anyone?

**elite-fusion** · 03-09-2015 06:23 AM

Originally Posted by VenturiRS

B8.5 S4, I'm either in Danbury CT, or Lower Westchester/North Bronx.

Would like some VAG COM mods done to my car. Windows, LED %, hidden menu etc... anyone?

If you're willing to come over the GWB I can perhaps assist :)

**booost** · 03-09-2015 07:12 AM

I'm in Stamford, PM me.

**Cbuster77** · 03-09-2015 12:51 PM

Anyone in the ocean county nj area. Looking to just do a couple mods

**homelessNY_LI** · 03-09-2015 06:33 PM

Originally Posted by Cbuster77

Anyone in the ocean county nj area. Looking to just do a couple mods

In ocean once and a while visiting family. PM location and mods and I'm sure we can work something out

**q5 dave** · 03-10-2015 12:22 PM

looking for a fellow enthusiast on LI to help me do some mods to my facelift Q5

-enable needle sweep
-disable seatbelt chime
-disable DRL wink(when blinker is on)
-enable hidden menu
-enable windows up/down with remote

I'm in western suffolk and I can meet anywhere. I just need 5 minutes of your experience

**homelessNY_LI** · 03-12-2015 09:43 AM

Originally Posted by q5 dave

looking for a fellow enthusiast on LI to help me do some mods to my facelift Q5

-enable needle sweep
-disable seatbelt chime
-disable DRL wink(when blinker is on)
-enable hidden menu
-enable windows up/down with remote

I'm in western suffolk and I can meet anywhere. I just need 5 minutes of your experience

Enjoy

**q5 dave** · 03-12-2015 05:13 PM

Originally Posted by homelessNY_LI

Enjoy

James, you're a great guy! I really appreciate your help

**Project Quattro** · 03-22-2015 07:09 AM

Just got my Ross-Tech cable with VCDS 14.10 up and running. I'm in Trumbull, CT, and happy to help out with coding. Full disclosure: I'm new at the software.

**lossgenius** · 03-26-2015 10:28 AM

New to the site and just received my Ross-Tech cable:

Model : HEX-USB+CAN
Software : latest
Location : Staten Island, NY
Contact : Shoot me a PM

**Sales@DriveAuto** · 03-31-2015 04:21 PM

We have VAG-COM's at both of our locations (Clifton and Mountainside, NJ). We can scan/clear codes and perform VAG-COM mods/coding - if you bring the print out of the codes, we can usually knock them out quickly and free of charge!

Thread: Tri-State Section VAG-COM Owners

Thread Tools

Display

Bookmarks

Bookmarks

Posting Permissions