Audizine - An Automotive Enthusiast Community

Results 1 to 25 of 25
  1. #1
    Senior Member Two Rings A4-Achtung's Avatar
    Join Date
    Oct 01 2008
    AZ Member #
    33714
    My Garage
    2.8 B5 A4 Quattro
    Location
    Austin, Texas - Third Coast

    Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Guest-only advertisement. Register or Log In now!
    I was just wondering if anyone is running a 1.3 Bar chip in their B5 A4 Quattro? I am looking to get a chip from Speed Tuning and was wondering peoples feedback on 1.3 bar chip. BTW my car is a 2001 a4 quattro.
    2001.5 B5 A4 QTM - AVIC F700BT Mod'd 3.0 - GIAC-X Tune - Bailey DV36 - 3 in. TestPipe 2.5'' Back- Blacked Out Everything - 6000k DDM HID Headlights And Fogs - Slotted and Drilled Rotors - HAIL DAMAGE!!! -

  2. #2
    Senior Member Two Rings A4-Achtung's Avatar
    Join Date
    Oct 01 2008
    AZ Member #
    33714
    My Garage
    2.8 B5 A4 Quattro
    Location
    Austin, Texas - Third Coast

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Would a n75 h or j vavle cause a me to go into limp mode with this tune?
    2001.5 B5 A4 QTM - AVIC F700BT Mod'd 3.0 - GIAC-X Tune - Bailey DV36 - 3 in. TestPipe 2.5'' Back- Blacked Out Everything - 6000k DDM HID Headlights And Fogs - Slotted and Drilled Rotors - HAIL DAMAGE!!! -

  3. #3
    Veteran Member Four Rings Seerlah's Avatar
    Join Date
    Dec 05 2007
    AZ Member #
    23104
    Location
    A place between here and there

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    I hate to flame people on this forum baord, so I don't (as I hate seeing people belittled, unless they get on my nerves ). But basically just get the speedtuning flash 1.3 bar, forge dv (place in yellow spring), boost gauge and call it a day . A chip is not that big of a decision as many would conjecture. No need for an upgraded n75 valve or mbc.

  4. #4
    Senior Member Two Rings A4-Achtung's Avatar
    Join Date
    Oct 01 2008
    AZ Member #
    33714
    My Garage
    2.8 B5 A4 Quattro
    Location
    Austin, Texas - Third Coast

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Thanks for the info on the n75 valve.
    2001.5 B5 A4 QTM - AVIC F700BT Mod'd 3.0 - GIAC-X Tune - Bailey DV36 - 3 in. TestPipe 2.5'' Back- Blacked Out Everything - 6000k DDM HID Headlights And Fogs - Slotted and Drilled Rotors - HAIL DAMAGE!!! -

  5. #5
    Veteran Member Four Rings SykoraA4's Avatar
    Join Date
    Aug 09 2007
    AZ Member #
    20202
    Location
    Mount Airy, MD

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    i have a speed tuning flash, and i love it.
    - Will

    06_Avant . DTM K0R-Gt. etc...

    The Avants Timeline

  6. #6
    Senior Member Two Rings A4-Achtung's Avatar
    Join Date
    Oct 01 2008
    AZ Member #
    33714
    My Garage
    2.8 B5 A4 Quattro
    Location
    Austin, Texas - Third Coast

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Good to hear! I am planning on sending my ecu out this weekend.
    2001.5 B5 A4 QTM - AVIC F700BT Mod'd 3.0 - GIAC-X Tune - Bailey DV36 - 3 in. TestPipe 2.5'' Back- Blacked Out Everything - 6000k DDM HID Headlights And Fogs - Slotted and Drilled Rotors - HAIL DAMAGE!!! -

  7. #7
    Veteran Member Four Rings McGovs2.7TB5's Avatar
    Join Date
    May 28 2008
    AZ Member #
    29282
    My Garage
    2015 Tacoma Off Road
    Location
    Denver, CO

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    I've had my SpeedTuning flash for just about a year now and I've been really happy with it. Go for it.
    2015 Tacoma Off Road - current
    2001.5 S4 avant - sold
    2001 A4 sedan - hit and totalled

  8. #8
    Veteran Member Three Rings b5andm3's Avatar
    Join Date
    Aug 22 2008
    AZ Member #
    32263
    Location
    Central Maryland

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Quote Originally Posted by SykoraA4 View Post
    i have a speed tuning flash, and i love it.
    Did you just drive down to their shop?
    2000.5 A4Q - 2871r / 1.9L Stroked / IE Rods / JE Pistons / 3.5" TBE Exhaust / Forge MBC / 630cc Injectors / Walbro 255lph Fuel Pump / VR6 MAF / Unitronic Tune / CM FX600 / ECS N75 Race Valve / ECS 9lb Alum Flywheel / Forge TIP / Forge DV / ARP Head Studs / BBS LMs / RS4 Front Bumper / Hagus Mirrors / Brembo BBK / RS4 Shift Knob / JL Audio Speakers, Subwoofer & Amplifier / Clarion NX409 / HR Race Springs / Evolution Racewerks FMIC

  9. #9
    Senior Member Two Rings A4-Achtung's Avatar
    Join Date
    Oct 01 2008
    AZ Member #
    33714
    My Garage
    2.8 B5 A4 Quattro
    Location
    Austin, Texas - Third Coast

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Awesome feedback fellas I haven't heard too much info from this company on the forum and just wanted to see what you guys have too say about it.
    2001.5 B5 A4 QTM - AVIC F700BT Mod'd 3.0 - GIAC-X Tune - Bailey DV36 - 3 in. TestPipe 2.5'' Back- Blacked Out Everything - 6000k DDM HID Headlights And Fogs - Slotted and Drilled Rotors - HAIL DAMAGE!!! -

  10. #10
    Senior Member Three Rings erikas3's Avatar
    Join Date
    Feb 08 2008
    AZ Member #
    25041
    My Garage
    2003 Jetta GLI 24V
    Location
    Tinley Park, IL

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Hi, I have this chip and I have a question to others. Since my n75 is broken, I have an mbc in place. I have it set to 18psi and am noticing very bad gas mileage (22.7mpg). What kind of boost numbers are you guys seeing? I have a feeling I may need to turn it down..
    1998.5 Audi A4 1.8T (Hibiscus Red)
    Soon to be BT...

  11. #11
    Veteran Member Four Rings Seerlah's Avatar
    Join Date
    Dec 05 2007
    AZ Member #
    23104
    Location
    A place between here and there

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    From what I have read from reviews, Speedtuning is not in any way a new company. I think they are originated out of Austria and are just starting to expand thier business to the states. Their tunes are just as good as the other companies. It is just that a company can not just come from left feild, expect to market thier goods at $500 and expect sales. People would rather just go with what is a reputable company whom has established thier footprints into the tuner industry (ie GIAC, APR, Revo, Unitronic, etc). I myself went with CTapp mainly because I want to get a BT application later on. I can upgrade with them later on at cost to reach price of BT tune and they have MAFless tunes. If I were to just want to get my ECU flashed and not want to go BT, I would def go the Speedtuning route. All in all, I have read nothing but great reviews from Speedtuning. My 2 cents

  12. #12
    Veteran Member Four Rings flynnr's Avatar
    Join Date
    Sep 22 2008
    AZ Member #
    33341
    My Garage
    2015 Q7 TDI Prestige/S-Line
    Location
    Minnesnowta (Roch)

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    yeah, i have ST, and couldnt be more happy

    (i had a small leak in the vac line coming off the front of the intake mani when i got it, so initially i was like this isnt anything great... but for under $200 i was still impressed) and after i fixed it, it REALLY sets me back in my seat... definitely a noticeable gain in the butt dyno


    and i got it for $125 with that stupid group buy everyone bitched about ; )

    speedtuning ftw

  13. #13
    Senior Member Two Rings A4-Achtung's Avatar
    Join Date
    Oct 01 2008
    AZ Member #
    33714
    My Garage
    2.8 B5 A4 Quattro
    Location
    Austin, Texas - Third Coast

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    LOL ya I was reading that old thread. Man I can't wait to order it, thanx for the info.
    2001.5 B5 A4 QTM - AVIC F700BT Mod'd 3.0 - GIAC-X Tune - Bailey DV36 - 3 in. TestPipe 2.5'' Back- Blacked Out Everything - 6000k DDM HID Headlights And Fogs - Slotted and Drilled Rotors - HAIL DAMAGE!!! -

  14. #14
    Registered Member Three Rings Rhinop21's Avatar
    Join Date
    Mar 04 2008
    AZ Member #
    26021
    Location
    West linn, Oregon

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    I have speedtuning I love it.
    got it for 125 too.
    http://i200.photobucket.com/albums/a.../dopeaudi3.jpg
    1998 A4 sold

    1995 Talon tsi awd. 6 bolt swap.

  15. #15
    Veteran Member Four Rings McGovs2.7TB5's Avatar
    Join Date
    May 28 2008
    AZ Member #
    29282
    My Garage
    2015 Tacoma Off Road
    Location
    Denver, CO

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Quote Originally Posted by erikas3 View Post
    Hi, I have this chip and I have a question to others. Since my n75 is broken, I have an mbc in place. I have it set to 18psi and am noticing very bad gas mileage (22.7mpg). What kind of boost numbers are you guys seeing? I have a feeling I may need to turn it down..
    I see spikes at about 20-21 and holds about 17-18. My hwy mileage is better than stock but in town I noticed a drop as well. Best bet if you're watching mileage is to keep throttle as steady as possible when accelerating/cruising and only boost when necessary.
    2015 Tacoma Off Road - current
    2001.5 S4 avant - sold
    2001 A4 sedan - hit and totalled

  16. #16
    Veteran Member Four Rings djwimbo's Avatar
    Join Date
    Feb 15 2008
    AZ Member #
    25294
    My Garage
    E46 323i 5-Sp
    Location
    616/MI

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Quote Originally Posted by McGovs1.8TB5 View Post
    ...Best bet if you're watching mileage is to keep throttle as steady as possible when accelerating/cruising and only boost when necessary.
    I'll add to that. If you have a boost gauge, the more it goes past "0" and into boost, the more fuel you're wasting. I generally drive (when it's up to temp) in the 5-10 in Hg range. People behind me don't like it, but I get pretty decent mileage.
    "Thank god I had my body, because it felt so good."

  17. #17
    Senior Member Three Rings erikas3's Avatar
    Join Date
    Feb 08 2008
    AZ Member #
    25041
    My Garage
    2003 Jetta GLI 24V
    Location
    Tinley Park, IL

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Quote Originally Posted by djwimbo View Post
    I'll add to that. If you have a boost gauge, the more it goes past "0" and into boost, the more fuel you're wasting. I generally drive (when it's up to temp) in the 5-10 in Hg range. People behind me don't like it, but I get pretty decent mileage.
    Exactly the technique I use, yet it does not help me at all. I think I need to boost leak test it again since running seafoam did not help at all.
    1998.5 Audi A4 1.8T (Hibiscus Red)
    Soon to be BT...

  18. #18
    Senior Member Two Rings A4-Achtung's Avatar
    Join Date
    Oct 01 2008
    AZ Member #
    33714
    My Garage
    2.8 B5 A4 Quattro
    Location
    Austin, Texas - Third Coast

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Tight!!!
    2001.5 B5 A4 QTM - AVIC F700BT Mod'd 3.0 - GIAC-X Tune - Bailey DV36 - 3 in. TestPipe 2.5'' Back- Blacked Out Everything - 6000k DDM HID Headlights And Fogs - Slotted and Drilled Rotors - HAIL DAMAGE!!! -

  19. #19
    Veteran Member Four Rings SykoraA4's Avatar
    Join Date
    Aug 09 2007
    AZ Member #
    20202
    Location
    Mount Airy, MD

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Quote Originally Posted by b5andm3 View Post
    Did you just drive down to their shop?
    yes sir, its a little dodgey though.
    - Will

    06_Avant . DTM K0R-Gt. etc...

    The Avants Timeline

  20. #20
    Veteran Member Three Rings Jc61990's Avatar
    Join Date
    Aug 22 2008
    AZ Member #
    32238
    My Garage
    2002 Audi TT 1.8TQm
    Location
    Long Island, NY

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    i got the 1.3 bar tune.. love it.. pulls nice and has got some torque. i threw on an MBC after my n75 and im making 20-22 psi
    JC | 2002 Denim Blue TT Coupe 1.8TQm
    Past: 1999.5 Brilliant Black A4 1.8TQ

  21. #21
    Established Member Two Rings
    Join Date
    Jun 13 2007
    AZ Member #
    18784
    My Garage
    2005.5 A4 2.0T 6MT
    Location
    Leesburg, VA

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Quote Originally Posted by SykoraA4 View Post
    yes sir, its a little dodgey though.
    Yeah, it's really easy to miss if you're coming down the way really fast like I was. It didn't help it was a rainy day and my patience had been tested by 495 rush hour traffic. Definitely recommended as an excellent inexpensive alternative to the usual suspects. I've had mine for a few months and I haven't had any issues.
    2000 A4 1.8TQM Ebony Pearl
    210K on the Clock and going...

    2005.5 A4 2.0T Quattro 6MT Moro Blue
    Heated seats. Winter calls.

    ************************
    Future Plans
    B8.5 S5... at some point... or a Cayman.

  22. #22
    Senior Member Two Rings A4-Achtung's Avatar
    Join Date
    Oct 01 2008
    AZ Member #
    33714
    My Garage
    2.8 B5 A4 Quattro
    Location
    Austin, Texas - Third Coast

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Ya i'm defiantly sending my ecu out this weekend. So stock n75 valve is fine I plan on doing 3in piping from turbo back and also getting a forge dv. Can't wait till x-mas getting some h&r race springs and grooved billies.
    2001.5 B5 A4 QTM - AVIC F700BT Mod'd 3.0 - GIAC-X Tune - Bailey DV36 - 3 in. TestPipe 2.5'' Back- Blacked Out Everything - 6000k DDM HID Headlights And Fogs - Slotted and Drilled Rotors - HAIL DAMAGE!!! -

  23. #23
    Account Terminated Four Rings
    Join Date
    Aug 16 2007
    AZ Member #
    20361
    Location
    Buffalo NY

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    3"... why? you will lose power from no back pressure for that lillte k03... just go 2.5-2.75

  24. #24
    Veteran Member Four Rings flynnr's Avatar
    Join Date
    Sep 22 2008
    AZ Member #
    33341
    My Garage
    2015 Q7 TDI Prestige/S-Line
    Location
    Minnesnowta (Roch)

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    yeah, 2.5 should be plenty big, i have that, and my exhaust sounds great : )


    btw - i highly recommend going the custom exhaust route... i had borla, and wasnt all that pleased... so i sold it, and brought my car to a little local exhaust shop that i heard did good work, and i brought them the magnaflow muffler i wanted, and one of these resonators (i steel wool'd the paint off when i got it) http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

    (only $21.99 shipped)

    The sound imo is the prefect sound for our cars... its deep and just a little raspy, but doesnt sound rice at all. so for (180 for magnaflow, 20 for the resonator, 60 for install) i spent 260 on the whole works with 2.5" piping between the two.

    that paired with st chip, im a cheapskate lol but am very happy

  25. #25
    Senior Member Two Rings A4-Achtung's Avatar
    Join Date
    Oct 01 2008
    AZ Member #
    33714
    My Garage
    2.8 B5 A4 Quattro
    Location
    Austin, Texas - Third Coast

    Re: Speed Tuning Chip 1.3 Bar..... Anyone Have One?

    Well It's an overkill but I don't think that it will have negative effects performance wise.
    2001.5 B5 A4 QTM - AVIC F700BT Mod'd 3.0 - GIAC-X Tune - Bailey DV36 - 3 in. TestPipe 2.5'' Back- Blacked Out Everything - 6000k DDM HID Headlights And Fogs - Slotted and Drilled Rotors - HAIL DAMAGE!!! -

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.