is this possible?

[Molotov]

can you check which cylinder is misfiring through vagcom? logged 014 at idle and i get 4 count, then rev'd a little and got 5 count.. then 6.

Just changed my spark plugs to the bosch from ecode that come with gtrs kit.
Also replaced my coilpacks with the bolt down ones from ecs. Hand tightened all spark plugs, then gave them a good 1/4 turn with the socket.

Should I just wait for a cel so I can see which one is misfiring

[Pr0n]

Yes. It'll be something like this:

16684 - Random/Multiple Cylinder Misfire Detected
P0300 - 35-00 - -
16688 - Cylinder 4: Misfire Detected
P0304 - 35-00 - -

It should be under the Engine section.

[NightRoller USP]

You can take it to autozone and they will check it for free!

[Molotov]

yeah I was just wondering if I could check them as it idles, per cylinder. What block 014 does is give you a total count. guess i'll have to wait for the cel

[Molotov]

just got anywhere from 0 to 8 misfire counts during a 1 minute drive :(

[F16HTON]

No need to trip...

You will get occasional misfires at idle.

[smarrick]

No need to trip...

You will get occasional misfires at idle.

Agree.

Is it like bad like a cylinder is dead or?

[AudiA6Biturbo]

MVB 15 will give you what you are looking for. display field 1 is cyl. number 1, display field 2 is cyl. 2 and so on. for cylinder 4 go to MVB 16 display field 1.

[Molotov]

alright, well, the car feels good. I just want it to be 100% and I'm still learning about cars in general.. never worked on a car before and have done all the installs myself. So it's normal for some misfires during idle, how about under load?

Under load I got maybe 2 misfires in a couple cylinders, then at one point i got 6 misfires in 2 cylinders, but that was all. Something to look further into or just say fuck it, and only worry about misfires when they cause cel?