Engine Mounts

[cal45fan]

Any guidance on replacing Left and Right engines mounts on a 2016 A6 with 2.0t? Thanks.

[agorich]

no guidance but was quoted around 5k from my local dealership to do mine. a local euro tuner shop quoted $2900.

[sepheroth86]

I did both of mine by myself in the garage on my 3.0t.

I'd suspect that the 2.0t would be easier.

[Mesquite77]

2.0T is easier than 3.0L. $600 should get you both mounts, then either jack up engine from below with piece of wood (how I did my DIY), or use an engine holder to jack it up about 2 inches.

Lot of DIY's on youtube, check for A4, same thing for 2.0L.

My DIY (short version): https://www.audiworld.com/forums/a6-c7-platform-discussion-194/diy-2-0l-easier-than-3-0l-motor-mount-replacement-a6-c7-3036231/

[sepheroth86]

I bought performance mounts for my 3.0t for under $500.

[Benji16]

For 2.0t its the same procedure exept no need to remove oil cooler like 3.0t i highlighted the bolts that need to be removed on both sides. Not need to remove fender liner just toss it to one side and have someone hold it while remove the 3 bolts to save time. Jack up engine and remove the mounts. Dont strip the center motor mount triple square bolt or you are focked.288137288138288139