Log in

View Full Version : Engine Torque Monitor 2 (P1335)


brianc21
08-27-2016, 12:45 PM
Has anyone else seen this fault code or know anything about it? I was giving it steady throttle as I was rounding the on ramp, then once I started to accelerated a little harder to merge it popped the EPC and went limp. The gear selector showed "S7" for the first time ever and the gas pedal was totally dead. Pulled over and restarted and all worked fine.
brianc21
08-27-2016, 12:46 PM
http://uploads.tapatalk-cdn.com/20160827/2de4005a8ebd00fe2bb385a741668cb7.jpg

Sent from my LG-H901 using Tapatalk
omegis83
08-27-2016, 01:19 PM
I'm going to contribute my guesses based on other VW/Audi models:
-Dirty MAF
-Carbon buildup
-Tune needs updating

You can search on Google for "Audi p1335" or click the link below:
http://bfy.tw/7QR6
SwankP3RF3ct10n
08-27-2016, 05:25 PM
No MAF on B8+ S4's.
omegis83
08-27-2016, 07:42 PM
No MAF on B8+ S4's.

Fair enough

So carbon buildup or tune related
brianc21
08-27-2016, 07:46 PM
I found the explanation of the code in the Ross Tech site and looks like it could be Intake related. I'll have to take a closer look later after work.

Carbon seems unlikely since its a 2014 with 20k miles.

Sent from my LG-H901 using Tapatalk
SeniorCypress80
12-06-2019, 09:57 AM
Ever diagnose what’s this was? I just had p1335 limp me out while on a spirited drive.


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)
midnitemass
12-06-2019, 10:05 AM
Had the same thing happen to me yesterday on the freeway. Luckily there wasn't too much traffic at the time. I took some logs and sent them off to the tuner to see if it is related to the stg ii I just flashed.
SeniorCypress80
12-06-2019, 10:37 AM
Had the same thing happen to me yesterday on the freeway. Luckily there wasn't too much traffic at the time. I took some logs and sent them off to the tuner to see if it is related to the stg ii I just flashed.

Weird, are you on 93 big TB file? Iv never had this but always ran e40 file. Did yours happen getting on freeway? There is not a lot of documentation I’m seeing for this code but the couple mentions seemed to be while Corning w/ throttle. Mind sending me your log?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)
midnitemass
12-06-2019, 10:41 AM
91 file. I was just maintaining speed on road, maybe 2500 rpm. The log I sent is about 16mb, but you can take a look and see if anything appears out of the ordinary.
midnitemass
12-06-2019, 10:44 AM
Log:

https://drive.google.com/file/d/13_6nx5lkMpl6nv7x8oWAoYnsq3pY5NXb/view?usp=drivesdk
brianc21
12-06-2019, 10:45 AM
Ever diagnose what’s this was? I just had p1335 limp me out while on a spirited drive.


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)It was either the supercharger intercooler leak, or rodents that chewed thru some wiring. I don't remember which ailment caused this one, but it was one of those two.

Sent from my LM-G710 using Tapatalk
UkuRiSh
12-06-2019, 03:12 PM
colder air more power ! Most like it you hit TQ limit on tune and your tuner should adjust that... In what area are you locate and what ambient was at that day ?
midnitemass
12-06-2019, 03:16 PM
colder air more power ! Most like it you hit TQ limit on tune and your tuner should adjust that... In what area are you locate and what ambient was at that day ?

I'm in Phoenix, AZ. It was probably 70-75 degrees F when it occurred.
UkuRiSh
12-06-2019, 03:34 PM
I'm in Phoenix, AZ. It was probably 70-75 degrees F when it occurred.

you got very low timing 4-9* across all runs, sounds like limp mode or something ! What specs and what fuel ?
UkuRiSh
12-06-2019, 03:36 PM
also when you tune your car or did you do any new revision of software recently ? Car was runs fine before ?
midnitemass
12-06-2019, 03:38 PM
you got very low timing 4-9* across all runs, sounds like limp mode or something ! What specs and what fuel ?

Yeah the EPC light came on, so limp mode makes sense.

IE stg ii DP tune
KI 206mm crank pulley

- - - Updated - - -


also when you tune your car or did you do any new revision of software recently ? Car was runs fine before ?

Was running stg I and it was running fine. Installed Merc HX and crank pulley this weekend
UkuRiSh
12-06-2019, 03:43 PM
Yeah the EPC light came on, so limp mode makes sense.

IE stg ii DP tune
KI 206mm crank pulley

- - - Updated - - -



Was running stg I and it was running fine. Installed Merc HX and crank pulley this weekend

100% tune related ! Holy batman 206mm [evilsmile] … You need new revision lol

Contact with IE and provide them your new upgrades ! I hear only good staff about customer service at IE
midnitemass
12-06-2019, 03:46 PM
100% tune related ! Holy batman 206mm [evilsmile] … You need new revision lol

Contact with IE and provide them your new upgrades ! I hear only good staff about customer service at IE


That's what I figured. Emailed them twice since Monday, no response yet. Looks like they are overhauling their ordering portal, and coupled with Black Friday, they are probably overloaded with emails. I appreciate the response from you, my dude!!!
UkuRiSh
12-06-2019, 03:57 PM
That's what I figured. Emailed them twice since Monday, no response yet. Looks like they are overhauling their ordering portal, and coupled with Black Friday, they are probably overloaded with emails. I appreciate the response from you, my dude!!!

No problem and good luck ! Looking for results.... I want big 200mm+ on my Q7 [:D]
midnitemass
12-07-2019, 04:32 PM
so what's the best practice while I'm waiting for IE to sort this out? just roll the dice, or revert to stg I?
SeniorCypress80
12-11-2019, 04:24 AM
so what's the best practice while I'm waiting for IE to sort this out? just roll the dice, or revert to stg I?

Any updates on this?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)
midnitemass
12-11-2019, 05:20 AM
IE said the had me in line for a tune revision...waiting on that.
SeniorCypress80
12-11-2019, 05:33 AM
Damn, so that means I’m ever further away from resolution. I am still waiting on the email to tell me I’m in line for new revision.

Did they offer up any information or suggestions for the time being? Are you still driving your car?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)
midnitemass
12-11-2019, 05:43 AM
I reverted back to stg ii and it seems fine, but I have been driving my q5 in the meantime. Getting EPC light and losing power on the freeway is not something I want to happen in the near future
brianc21
12-11-2019, 05:53 AM
Just something to keep in mind, the more I thought about it, this was the initial symptom of my supercharger leaking coolant into the cylinder. Started slow like this, then eventually started getting misfires.

Sent from my LM-G710 using Tapatalk
SeniorCypress80
12-11-2019, 05:58 AM
Just something to keep in mind, the more I thought about it, this was the initial symptom of my supercharger leaking coolant into the cylinder. Started slow like this, then eventually started getting misfires.

Sent from my LM-G710 using Tapatalk

I JUST replaced mine less than 1k ago with new v2 OEM. I can safely say on my car this isn’t the problem. But yes you are 100% correct, my car was doing this all the time when it was leaking from ICs. However the logs and codes are completely different. I was seeing misfires which resulted in EPC mode this didn’t have and misfires saved and a new code of the P1335, which I’m finding very little documentation of.


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)