Disabled corner lights, turn signals remain on.

[Sceanzo]

Used VCDS for some changes. Among them were wink disable and corner light disable. Car is a B8.5

I notice now my turn signal bulbs remain illuminated with the headlights on. Which setting did I mess up? Had a shop do it. Was sitting next to him reading off the coding instructions.

[Gunnark100]

You messed up something with them:

Enable Front Turn Signals as Parking lights
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 10
Bit 0- Check the box or change :Bit 0 to 1
Once the change has been made you can enable the front turn signals as DRL's by making the following change:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2
Bit 6 - Check the box or change :Bit 0 set to 1

Its enabled on my car aswell, but i changed adaption channel 5 to 0% to keep them off, could be wrong but difference is if its enabled like this(turn as parking) turn should fade in/out slower, then only blink.

[Sceanzo]

Hmm I don't know how that could have happened. It wasn't my intention. I will go back and have them hook back up with that coding you gave me and turn it off.