What did you do to your C6 today?

[Alym]

Added 40 extra BHP [emoji23] [emoji23] [emoji23] [emoji23]

http://images.tapatalk-cdn.com/15/10/16/49446abaa073d51d3d4bb1706bd13197.jpg

http://images.tapatalk-cdn.com/15/10/16/9c7b051ba5788b52da76515110f38788.jpg

Sent from my SM-G900F using Tapatalk

[rollininstyle04]

So what was the total bill for the install??

About $1000 in parts and another $1000 in labor. The car was from Chicago so the bolts in the knuckles on both sides were seized, they spent 2+ days just trying to break them loose, thought we were going to need new knuckles (at $600/ea) so ultimately just happy that didn't happen.

[boywonder]

http://images.tapatalk-cdn.com/15/10/19/1cf7ae8ca284a43d3115f47b2d135a67.jpg

Gave her a good wash after she was in the shop for a few days getting the thermostat replaced.

[SinCityA6]

Added 40 extra BHP [emoji23] [emoji23] [emoji23] [emoji23]

http://images.tapatalk-cdn.com/15/10/16/49446abaa073d51d3d4bb1706bd13197.jpg

http://images.tapatalk-cdn.com/15/10/16/9c7b051ba5788b52da76515110f38788.jpg

Sent from my SM-G900F using Tapatalk

Info??

[Alym]

Info??
http://pages.ebay.com/link/?nav=item.view&id=191713982239&alt=web
Straight swap with the original ones

Sent from my SM-G900F using Tapatalk

[melomandn]

In all my years on this forum I have not heard of this so I thought I would post it up here for everyone's education:

Last night, went to leave the house and had no power steering and dash board lit up (no charge to the battery). Popped the hood and noted that neither the supercharger pulley/belt and accessory belt were spinning. After a couple of seconds, the belts started spinning but both were pretty shredded. So I shut the car down, called my mechanic (even answers after hours) and had it towed into the shop.
This morning, mechanic gets under the car and (as he suspected) discovers the harmonic balancer/lower pulley assembly has separated. Apparently, in an effort to smooth out vibrations produced by the motor, Audi engineers design the harmonic balancer/lower pulley with a rubber bushing sandwiched in between them. Over time, this rubber degrades and tears which allows the harmonic balancer to spin and the pulley doesn't (or does so at a different rate of speed due solely to friction).
Long story short, the bushing cannot be replaced as it is one complete unit. At the same time, BOTH tensioners, rollers and belts (obviously) need to be replaced. Waiting on total estimate for work to be completed.

Update: Cost of repairs $1500. Balancer/pulley needs to be ordered from Germany. Car is down until next Wednesday[headbang].

Update #2: Looking into the cost of Stage II GAIC since they are already going to be in there anyway.

This has become a noticeable problem in the B8 forum. JHM has produced a one piece lightweight pulley that acts as a "stage two" pulley as well so you're able to kill two birds with one stone.

Something to consider.

[AFONE]

^^^^thanks for sharing the info.

Here's a link to JHM with a few details....
https://jhmotorsports.com/shop/catalog/jhm-hd-lightweight-crank-pulley-for-30t-fsi-v6-fits-b8-b85-s4-s5-8r-q5-sq5-c6-c7-a6-a7-4l-q7-d4-a8-p-3307.html


Sent from my iPhone using Tapatalk

[SinCityA6]

This has become a noticeable problem in the B8 forum. JHM has produced a one piece lightweight pulley that acts as a "stage two" pulley as well so you're able to kill two birds with one stone.

Something to consider.


^^^^thanks for sharing the info.

Here's a link to JHM with a few details....
https://jhmotorsports.com/shop/catalog/jhm-hd-lightweight-crank-pulley-for-30t-fsi-v6-fits-b8-b85-s4-s5-8r-q5-sq5-c6-c7-a6-a7-4l-q7-d4-a8-p-3307.html


Sent from my iPhone using Tapatalk

Thanks guys. I wish I had seen this before I went ahead and did the repairs with the OEM unit. It may be something I will look into in the future.

[SinCityA6]

Got her back from the shop. Took the opportunity of a complete front end tear down to go ahead and upgrade the supercharger pulley and flash to GIAC Stage II. I also added the roof lip...

http://i1113.photobucket.com/albums/k509/cmbeckner/1F381916-53EB-4B93-9F05-E8D21A790853.jpg
http://i1113.photobucket.com/albums/k509/cmbeckner/4F28139E-D86E-48DE-AA33-E8C02A35BF2F.jpg

The fit has a little to be desired as the roof has a slight curve to it and the lip is not completely able to match the contour. Paint is a spot on match so for $55 what more can I expect. I can always pull it off, template the roof and then trim the lip.

[AFONE]

I wasn't a fan of the roof spoiler but it looks like it suits your car while not looking too "fast & furious". Side shot when you get a chance.


Sent from my iPhone using Tapatalk

[domc20]

Got her back from the shop. Took the opportunity of a complete front end tear down to go ahead and upgrade the supercharger pulley and flash to GIAC Stage II. I also added the roof lip...

http://i1113.photobucket.com/albums/k509/cmbeckner/1F381916-53EB-4B93-9F05-E8D21A790853.jpg
http://i1113.photobucket.com/albums/k509/cmbeckner/4F28139E-D86E-48DE-AA33-E8C02A35BF2F.jpg

The fit has a little to be desired as the roof has a slight curve to it and the lip is not completely able to match the contour. Paint is a spot on match so for $55 what more can I expect. I can always pull it off, template the roof and then trim the lip.
Looks good, nice and clean [emoji106]

Sent from my SAMSUNG-SM-N900A using Tapatalk

[SinCityA6]

I wasn't a fan of the roof spoiler but it looks like it suits your car while not looking too "fast & furious". Side shot when you get a chance.


Sent from my iPhone using Tapatalk

Here is a quick side shot. Car is filthy so I didn't want to take a full shot
http://i1113.photobucket.com/albums/k509/cmbeckner/66CBC901-8F74-4F20-A245-CE06CF4BE82C.jpg

[iaflyer]

I'm in the middle of adding a OEM Rear View Camera to my 2010 A6. Already replaced the license plate lights pull panel, ran some cable. Today was dropping the glovebox and wiring it into the MMI and connecting to the CAN bus. First time doing this kind of stuff so learning a lot.

http://i914.photobucket.com/albums/ac345/iaflyer/IMG_6176.jpg

Amazingly, I got it all back together! Not finished yet so we'll see if I did it all right...

[boywonder]

http://images.tapatalk-cdn.com/15/10/21/63c8d1ebb1c9e040ec0193cffebd905d.jpg

Washed her and then it rained ... :(

[callaghan.]

Buffed, polished, and waxed. Never seen it so bright white!

Also took off the tire letters to replace them as i had some rubbing and ruined them...debating keeping them off. Loving how clean it looks.

Next up: repaint the grill as this one is chipped to hell despite being just 3 months old (thanks ECS), and exhaust.

http://s27.postimg.org/u0x44bx9v/IMG_5851.jpg (http://postimage.org/)

http://s12.postimg.org/c0iy249ul/IMG_5841.jpg (http://postimage.org/)

http://s29.postimg.org/xtljcoign/IMG_5835.jpg (http://postimage.org/)

[Alym]

Changed back to round tail pipes... And ordered some pressed plates (Not on car yet as just ordered yesterday)

http://images.tapatalk-cdn.com/15/10/22/620dab5183572260f432372f656de59a.jpg

http://images.tapatalk-cdn.com/15/10/22/5001c34c0c41b4804d42dafef12fb05c.jpg

http://images.tapatalk-cdn.com/15/10/22/052ca55c3c138ec1afc9ef7b55314212.jpg

Sent from my SM-G900F using Tapatalk

[KBRUCE23]

Damn Aly, i don't think I've ever seen your car not look spotless!


Sent from my iPhone using Tapatalk

[Alym]

Damn Aly, i don't think I've ever seen your car not look spotless!


Sent from my iPhone using Tapatalk
Lol... I work in the car trade so it'd be sacrilege if it wasn't [emoji23] [emoji23] [emoji23] [emoji23]


Sent from my SM-G900F using Tapatalk

[SinCityA6]

Added the C7 shifter and boot. Makes a nice addition to the CF interior.

http://i1113.photobucket.com/albums/k509/cmbeckner/46940F22-BF7E-438A-8281-BB4BDB3F551A.jpg

[AFONE]

Current situation....http://images.tapatalk-cdn.com/15/10/26/ece656af737c069783fac7fc28606414.jpg


Sent from my iPhone using Tapatalk

[maga4]

Sin - the shifter assembly looks great!

AFONE - that's no good, sorry that happened! Hopefully it is a couple of quick fixes...

[AFONE]

After looking further, it isn't as bad as I thought. Need to replace a washer fluid connector and figure out how to reattach a few of the cracked connection points where the screws were either already missing or snapped off.
On the plus side, I can now easily access the orange side marker lights that I'd been meaning to swap out with the white ones I purchased months ago....


Sent from my iPhone using Tapatalk

[SinCityA6]

After looking further, it isn't as bad as I thought. Need to replace a washer fluid connector and figure out how to reattach a few of the cracked connection points where the screws were either already missing or snapped off.
On the plus side, I can now easily access the orange side marker lights that I'd been meaning to swap out with the white ones I purchased months ago....

Sent from my iPhone using Tapatalk

There is the silver lining.....

[callaghan.]

After looking further, it isn't as bad as I thought. Need to replace a washer fluid connector and figure out how to reattach a few of the cracked connection points where the screws were either already missing or snapped off.
On the plus side, I can now easily access the orange side marker lights that I'd been meaning to swap out with the white ones I purchased months ago....


Sent from my iPhone using Tapatalk


For that washer fluid connector...i cracked mine removing my bumper. I just bypassed it altogether using the existing connector. Works perfect and no weak points to break!

Swapping out the marker lights is super easy...don't need the bumper off for it. Just get a small flat head in and pop em out. 5 minute job.

[rollininstyle04]

Drove to Charlotte for Tuner Evolution this past weekend, got her all nice and cleaned up:

http://i140.photobucket.com/albums/r34/jmriegel/11224821_10207321464542356_874807455129593253_n_zp sgi0hw03q.jpg

http://i140.photobucket.com/albums/r34/jmriegel/12009601_978730095530028_5371757730840914837_n_zps wahjtzda.jpg

[SindreVjohnsen]

[drool][hail] Clean as a whistle

[AFONE]

For that washer fluid connector...i cracked mine removing my bumper. I just bypassed it altogether using the existing connector.
@callaghan How did you go about bypassing the connector?




Sent from my iPhone using Tapatalk

[JayRome]

First transmission service at 200,000km
Replaced with Nulon SynATF, works fine.

http://i149.photobucket.com/albums/s61/JayRome112/Audi%20A6/20151029_124557.jpg

[Alym]

Fitted LED rear lamps!
http://images.tapatalk-cdn.com/15/10/29/576b8769ed30e3afa9f28b7657d16144.jpg

http://images.tapatalk-cdn.com/15/10/29/240c245cd3d439d6b7b63ff14a976593.jpg

http://images.tapatalk-cdn.com/15/10/29/bf1ff7801d5e3edd76d807208645c87f.jpg

http://images.tapatalk-cdn.com/15/10/29/4846e7fe354f658559393e0acdc0d158.jpg

Sent from my SM-G900F using Tapatalk

[PatPS6]

Where did you get them

[Dutch_A6]

you can find them on ebay, here's the link i've found, they've been on my wish list for a while but just haven't gotten around to it.

http://www.ebay.com/itm/171983996049?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true

[grain370]

Here is a quick side shot. Car is filthy so I didn't want to take a full shot
http://i1113.photobucket.com/albums/k509/cmbeckner/66CBC901-8F74-4F20-A245-CE06CF4BE82C.jpg

I figured you would like it man, especially for the money. I love mine now. http://images.tapatalk-cdn.com/15/10/31/bcefd799a839ce599e7391592f23e40a.jpg


Sent from my iPhone using Tapatalk

[SinCityA6]

Ordered the 2 piece OEM front splitter (4F0 071 612 9AX and 4F0 071 609A 9AX). Will need to get it painted before mounting so it will be a couple of weeks before I am able to post pics.

[KBRUCE23]

Really anxious to see how this turns out man, where'd you get the parts if you don't mind me askig


Sent from my iPhone using Tapatalk

[Simon of Elmet]

Full chain service. [emoji49]

http://images.tapatalk-cdn.com/15/11/04/33752fc59411ae958baf531e70dd30c9.jpg

[Alym]

Where did you get them
Sorry for late reply... I got them from eBay

Sent from my SM-G900F using Tapatalk

[SinCityA6]

Really anxious to see how this turns out man, where'd you get the parts if you don't mind me askig


Sent from my iPhone using Tapatalk

Believe it or not, from Amazon. Genuine Audi Accessories.

[KBRUCE23]

Nice, I've been looking for a lip for some time now. I'll definitely check it out, thanks man!


Sent from my iPhone using Tapatalk

[kocyk123]

Full chain service. [emoji49]

http://images.tapatalk-cdn.com/15/11/04/33752fc59411ae958baf531e70dd30c9.jpg

Do you mind me asking how much you paid? I am affraid that I might need this done soon on my 07 4.2 FSI... Thanks in advance!

[whef21]

Fitted LED rear lamps!
http://images.tapatalk-cdn.com/15/10/29/576b8769ed30e3afa9f28b7657d16144.jpg

http://images.tapatalk-cdn.com/15/10/29/240c245cd3d439d6b7b63ff14a976593.jpg

http://images.tapatalk-cdn.com/15/10/29/bf1ff7801d5e3edd76d807208645c87f.jpg

http://images.tapatalk-cdn.com/15/10/29/4846e7fe354f658559393e0acdc0d158.jpg

Sent from my SM-G900F using Tapatalk
Where did you find these??

Sent from my SAMSUNG-SM-G900A using Tapatalk

[maga4]

you can find them on ebay, here's the link i've found, they've been on my wish list for a while but just haven't gotten around to it.

http://www.ebay.com/itm/171983996049?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true


Where did you find these??

Sent from my SAMSUNG-SM-G900A using Tapatalk

Looks like the above link might have them.

[Alym]

Sorry for late reply... I got them from eBay

Sent from my SM-G900F using Tapatalk


Where did you find these??

Sent from my SAMSUNG-SM-G900A using Tapatalk


Sent from my SM-G900F using Tapatalk

[SinCityA6]

Gave both of the girls a wash today. Started playing around with the iPhoto processing...

http://i1113.photobucket.com/albums/k509/cmbeckner/DC2FA4AD-C8F5-4F71-99F8-0E3FE76EE434.jpg

[ichi d]

Is thay the new splitter installed?

[SinCityA6]

No splitter yet. Received it yesterday and now waiting on paint which should arrive early next week. I will also be wrapping the blade portion in black vinyl next week too. Install is a couple of weeks out.

[PatPS6]

Hey man i have these but dont have the instructions on how to code them can you help me out



Where did you find these??

Sent from my SAMSUNG-SM-G900A using Tapatalk

[SinCityA6]

Added $30 of netting in the trunk. Cargo net and net pockets on each side...

http://i1113.photobucket.com/albums/k509/cmbeckner/A2C6930D-B5CB-410B-83A7-A632F1D27CAC.jpg
http://i1113.photobucket.com/albums/k509/cmbeckner/F83F41C4-3AF3-4C63-96A5-3B9DC0271359.jpg

[JayRome]

Halfway through building my new exhaust...

http://i149.photobucket.com/albums/s61/JayRome112/Audi%20A6/20151120_203533.jpg

[maga4]

Those pockets are great...are they OEM? If not, do you mind sharing where you got them? Thanks!

[KBRUCE23]

Rear sway bar installed plus this beaut finally got installed http://images.tapatalk-cdn.com/15/11/21/9cc7d4caef44930e662ec48abdcad5d3.jpg



Sent from my iPhone using Tapatalk

[Dutch_A6]

That's so pretty

Sent from my VS985 4G using Tapatalk

[KBRUCE23]

Thanks Dutch! Only issue (that I just noticed) is that the horn doesn't work haha. That's just a minor setback at this point


Sent from my iPhone using Tapatalk

[Dutch_A6]

Still looks great, where'd you get it?

Sent from my VS985 4G using Tapatalk

[SinCityA6]

Those pockets are great...are they OEM? If not, do you mind sharing where you got them? Thanks!

Not OEM, bought from Amazon. Brand is 9 Moon.

[KBRUCE23]

Still looks great, where'd you get it?

Sent from my VS985 4G using Tapatalk

I actually got it from a friend who was going to install it on an A4 but didn't. I believe the part number was for a TT-S though. The harnesses were different but my mechanic made it work somehow


Sent from my iPhone using Tapatalk

[Dutch_A6]

Very nice

Sent from my VS985 4G using Tapatalk

[KBRUCE23]

Thank you sir!


Sent from my iPhone using Tapatalk

[neimaD]

Looks wery nice.

[Alym]

Test fit of Honeycomb fog inserts!

http://images.tapatalk-cdn.com/15/11/30/8e6a372b54d8e2510e64d84cd53cd8e8.jpg

http://images.tapatalk-cdn.com/15/11/30/de4a9b8c2ed656163a64dbd4501b2297.jpg

http://images.tapatalk-cdn.com/15/11/30/98f92da284e38ade8e86f79072d6763b.jpg

And this pic just for fun! 😂
http://images.tapatalk-cdn.com/15/11/30/c2923d21969d2d428857704b43d14b54.jpg

Sent from my SM-G900F using Tapatalk

[AFONE]

Looks the business! Well done!


Sent from my iPad using Tapatalk

[KBRUCE23]

Always slick Aly, I really like those!




Sent from my iPhone using Tapatalk

[Alym]

Always slick Aly, I really like those!




Sent from my iPhone using Tapatalk
Cheers bro 👍

Sent from my SM-G900F using Tapatalk

[SinCityA6]

Ordered the Ross-Tech Hex-Net unit (comes with VCDS and VCDS mobile) so I can wirelessly scan the car, log data and do coding from my home computer/iPad/iPhone. Excited for it to get here so I can start playing around with it.

[SindreVjohnsen]

[QUOTE=Alym;11222375]Test fit of Honeycomb fog inserts! Where did u buy them [drool] a4 ?

[Alym]

[QUOTE=Alym;11222375]Test fit of Honeycomb fog inserts! Where did u buy them [drool] a4 ?
I made them myself!

Sent from my SM-G900F using Tapatalk

[SindreVjohnsen]

Nice :D Mayb I try that too :P

[A6AJ]

Took a drive in unseasonably warm weather around a neighboring lake area, sunroof open of course. It's December and 51 degrees in Iowa. Not a lot of complaints here...

[Dutch_A6]

install interior LED that were picked up on cyber Monday, man these things are BRIGHT!

[SinCityA6]

Pics or it didn't happen[emoji13]


Sent from my iPhone using Tapatalk

[Emre yılmaz]

http://i.hizliresim.com/W9jmM8.jpg (http://hizliresim.com/W9jmM8) MY a6 2.0 tdi

[Emre yılmaz]

http://i.hizliresim.com/Lgjroa.jpg (http://hizliresim.com/Lgjroa)

[Dutch_A6]

Not the greatest picture but....https://uploads.tapatalk-cdn.com/20151218/15fe8892362ef839bbc3d5803aa72554.jpg

Sent from my VS985 4G using Tapatalk

[Dutch_A6]

Nice work Emre, car looks great, love the color

Sent from my VS985 4G using Tapatalk

[SinCityA6]

Not the greatest picture but....https://uploads.tapatalk-cdn.com/20151218/15fe8892362ef839bbc3d5803aa72554.jpg

Sent from my VS985 4G using Tapatalk

Wow those are bright!!


Sent from my iPhone using Tapatalk

[KBRUCE23]

Cupra lip is here! Gonna check this out and see how I like it.
http://images.tapatalk-cdn.com/15/12/17/7d31153d9d6b77e9481fedf8562bf732.jpg


Sent from my iPhone using Tapatalk

[Dutch_A6]

Ya that's thru tint too, it's the ziza kit from ECS

Sent from my VS985 4G using Tapatalk

[haloguy628]

http://i.hizliresim.com/Lgjroa.jpg (http://hizliresim.com/Lgjroa)

So does that 2.0T four cylinder pull like crazy with those RS6 badges?

[Fiebs]

Dude man, all I can say is: #goals. Looks amazing!

- - - Updated - - -


http://i.hizliresim.com/W9jmM8.jpg (http://hizliresim.com/W9jmM8) MY a6 2.0 tdi

Dude man, all I can say is: #goals. Looks amazing!

[KBRUCE23]

Made some photoshops edit to help me make my decision about dipping or powder coating my peelers. What do you guys think?http://images.tapatalk-cdn.com/15/12/21/c13b1435c91abd8a1356dc95e28098b0.jpghttp://images.tapatalk-cdn.com/15/12/21/613791991d6e2a2afe44f9a241ca570f.jpghttp://images.tapatalk-cdn.com/15/12/21/db1e1e24a30f1c726254aa808d32c329.jpg


Sent from my iPhone using Tapatalk

[SinCityA6]

I have never been a big fan of black wheels.

[Dutch_A6]

It depends on the car and color and what you're looking for. I like the blacked out look but have never been a fan of those peelers, they look like starfish to me. I'm considering doing black Niche Targas for me next set, I kind of like the silver and black playing off each other.

Sent from my VS985 4G using Tapatalk

[grain370]

Yeah I agree with you, Sin. If they had more of a lip I would say just do the spokes black.


Sent from my iPhone using Tapatalk

[KBRUCE23]

Thanks for the feedback guys and I've got to say I agree. I've gotten tired of my peelers and I'm having some trouble finding wheels I like that will clear our calipers. I was thinking about doing this as my winter set up but don't think there's enough contrast for me with black on black. I appreciate all the input!


Sent from my iPhone using Tapatalk

[AFONE]

http://images.tapatalk-cdn.com/15/12/21/d960e4565439f92915f47ef783ef96f1.jpg

Just picked up a set of Hartmans (19x8.5 ET38) from a forum member. Still need to swap out the 245's for my 255's and then install my H&R springs to reduce that dorky gap.


Sent from my iPhone using Tapatalk

[domc20]

http://images.tapatalk-cdn.com/15/12/21/d960e4565439f92915f47ef783ef96f1.jpg

Just picked up a set of Hartmans (19x8.5 ET38) from a forum member. Still need to swap out the 245's for my 255's and then install my H&R springs to reduce that dorky gap.


Sent from my iPhone using Tapatalk
Nice [emoji106]

Sent from my SAMSUNG-SM-N900A using Tapatalk

[SinCityA6]

Looking good, Afone!!


Sent from my iPhone using Tapatalk

[ichi d]

Them Hartman's got some good Concave to them!

[AFONE]

Thanks guys. Took me forever to decide on which wheels I wanted until this local deal arrived at my doorstep. I can really tell the difference in the weight between these and the stock wheels.


Sent from my iPhone using Tapatalk

[emre6155]

http://i.hizliresim.com/dk4A7X.jpg (http://hizliresim.com/dk4A7X)

http://i.hizliresim.com/pBvpGa.jpg (http://hizliresim.com/pBvpGa)

http://i.hizliresim.com/lvB6bJ.jpg (http://hizliresim.com/lvB6bJ)


http://i.hizliresim.com/jVzGAW.jpg (http://hizliresim.com/jVzGAW)

http://i.hizliresim.com/XL2rl5.jpg (http://hizliresim.com/XL2rl5)

http://i.hizliresim.com/0mbo5D.jpg (http://hizliresim.com/0mbo5D)


MY 2010 A6 2.0 TDİ (224 HP)

[Dutch_A6]

You've done a nice job Emre, looks really good.

Sent from my VS985 4G using Tapatalk

[emre6155]

https://youtu.be/Iw2SdiC5PUM

[emre6155]

You've done a nice job Emre, looks really good.

Sent from my VS985 4G using Tapatalk

thanks bro

[dluxxx]

http://i.hizliresim.com/Lgjroa.jpg (http://hizliresim.com/Lgjroa)

Where did you get that rear diffuser?

[callaghan.]

http://i.hizliresim.com/dk4A7X.jpg (http://hizliresim.com/dk4A7X)

http://i.hizliresim.com/pBvpGa.jpg (http://hizliresim.com/pBvpGa)

http://i.hizliresim.com/lvB6bJ.jpg (http://hizliresim.com/lvB6bJ)


http://i.hizliresim.com/jVzGAW.jpg (http://hizliresim.com/jVzGAW)

http://i.hizliresim.com/XL2rl5.jpg (http://hizliresim.com/XL2rl5)

http://i.hizliresim.com/0mbo5D.jpg (http://hizliresim.com/0mbo5D)


MY 2010 A6 2.0 TDİ (224 HP)

Man, you're killing me with all that fake RS6 stuff on there. What's the point??

[SinCityA6]

I have to agree. Car looks amazing but the RS6 badging has to go. Takes a stunning car otherwise and turns it into a "Poser".


Sent from my iPhone using Tapatalk

[domc20]

How do you get the RS6 logo on the MMI

Sent from my SAMSUNG-SM-N900A using Tapatalk

[dufferdude]

Must be a "Euro" thing? Smh

[AFONE]

RS6 or not, it looks the business. Well done


Sent from my iPhone using Tapatalk

[maga4]

How do you get the RS6 logo on the MMI

Sent from my SAMSUNG-SM-N900A using Tapatalk

There are scripts for it. PM philip0001 and he can help get anything you want on there.

[boywonder]

Took out the center resonators and replaced it with straight pipes. I know a lot of guys get an x-pipe but my exhaust guy said it wouldn't make much of a difference. Very subtle difference in sound while cruising but a nice extra grunt when WOT! $60 well spent.

Sent from my SM-N910T using Tapatalk

[grain370]

Took out the center resonators and replaced it with straight pipes. I know a lot of guys get an x-pipe but my exhaust guy said it wouldn't make much of a difference. Very subtle difference in sound while cruising but a nice extra grunt when WOT! $60 well spent.



All of that was $60? If so I'll definitely do this is in the very bear future!


Sent from my iPhone using Tapatalk

[Dutch_A6]

I ran without the x-pipe to start but it clacked a bit at high rpms, the x-pipe smoothed that out and made it sound much better

Sent from my VS985 4G using Tapatalk

[KBRUCE23]

Got a package today, merry Christmas to me!
http://images.tapatalk-cdn.com/15/12/26/94edfb1553c3b8b89231dfbf78c86ae4.jpg


Sent from my iPhone using Tapatalk

[eKKoMan]

Wow! Superb. Looking forward to seeing them on the car!

[KBRUCE23]

Wow! Superb. Looking forward to seeing them on the car!

Thanks Alex, hopefully I'll get them on soon along with a couple other things!


Sent from my iPhone using Tapatalk

[maga4]

Installed the Chipwerke Pro box. Put it on last night in about 5 minutes and no problems at all. Very impressed with the performance of it - especially for the price! The entire power band is much smoother and the boost definitely does not die off at the end like it does stock.

I've had tunes on cars before (all Audis/VW turbos and all APR) and have to say it's at least as good of a jump as the 2.0T (B8) Stage 1 tune from APR. So nice to have a steady pull all the way to redline with it!

[se.farrell]

Got a package today, merry Christmas to me!
http://images.tapatalk-cdn.com/15/12/26/94edfb1553c3b8b89231dfbf78c86ae4.jpg


Sent from my iPhone using Tapatalk

Literally have the same ones, but havent had the time to install them. Im excited to get them put on

[KBRUCE23]

Literally have the same ones, but havent had the time to install them. Im excited to get them put on

Yea I'm hoping to get them on over the next couple weeks. What'd you go with for pads?


Sent from my iPhone using Tapatalk

[FL C6 Avant]

Installed the matching spare in the cargo well.
http://s27.postimg.org/7mb96m1z7/IMG_1147.jpg

Then, I built her a storage rack for the factory rims and all-seasons (well, and some Infiniti rims, too....)
http://s9.postimg.org/6yp8fnvlr/IMG_1146.jpg

http://s24.postimg.org/eeogdtc1h/IMG_1149.jpg

[A6AJ]

I took my daughter for her 9 month well-child checkup and heard her say "whoooo" as I threw it in Sport mode and accelerated appropriately for the limit of the road..... I'm getting Conti ExtremeContact DWS06's put on tomorrow, pretty stoked.

[Dutch_A6]

That's awesome and you'll love the conti's. My 6yo just told me to make mine to louder so she can hear it go faster lol

Sent from my VS985 4G using Tapatalk

[Daniel93]

One picture of my car ! :) http://imageshack.com/a/img910/9895/ngVMIy.jpg

[AFONE]

One picture of my car ! :) http://imageshack.com/a/img910/9895/ngVMIy.jpg

Very nice. What kind of splitter do you have up front? Any more picks of it?


Sent from my iPhone using Tapatalk

[Daniel93]

I bought a car with this front splitter but I seen like this in ebay for around 100 euro.This is a from back and interior.I installed aluminium pedals from audi rs6 and soon I will installed a aluminium botton . :) http://imageshack.com/a/img905/9674/EDnpzW.jpghttp://imageshack.com/a/img907/7442/mGHTHp.jpg http://imageshack.com/a/img908/818/8YZW5x.jpg

[Smooremin]

Yesterday I took delivery
http://i44.photobucket.com/albums/f47/twk826/Mobile%20Uploads/IMG_1498_zpsrpkqrboz.jpg (http://s44.photobucket.com/user/twk826/media/Mobile%20Uploads/IMG_1498_zpsrpkqrboz.jpg.html)
Today it got winters :)
http://i44.photobucket.com/albums/f47/twk826/Mobile%20Uploads/IMG_1502_zpsd0ajxwmd.jpg (http://s44.photobucket.com/user/twk826/media/Mobile%20Uploads/IMG_1502_zpsd0ajxwmd.jpg.html)

[FL C6 Avant]

Today it got winters :)
http://i44.photobucket.com/albums/f47/twk826/Mobile%20Uploads/IMG_1502_zpsd0ajxwmd.jpg (http://s44.photobucket.com/user/twk826/media/Mobile%20Uploads/IMG_1502_zpsd0ajxwmd.jpg.html)
nice! 2010, yes? I have your twin (minus the roof rax).

[Smooremin]

nice! 2010, yes? I have your twin (minus the roof rax).

Yep, 2010. Premium plus with sport pack. I got it from my father after he leased a new S7 from me. I helped him buy it a few years back in Beverly Hills at my sister store. I have always been a fan of the C6.5 Avant. I also currently have a stage 3+ B5 S4 Avant. This is so much easier to daily. Now the decision to chip it and get a pulley or not....

[M3andAMG]

Installed an EZ-Lip front spoiler and RS6 grill.

http://s12.postimg.org/x2ramgx6h/IMG_2326.jpg (http://postimg.org/image/x2ramgx6h/)

[cal3thousand]

Yep, 2010. Premium plus with sport pack. I got it from my father after he leased a new S7 from me. I helped him buy it a few years back in Beverly Hills at my sister store. I have always been a fan of the C6.5 Avant. I also currently have a stage 3+ B5 S4 Avant. This is so much easier to daily. Now the decision to chip it and get a pulley or not....

Do all the maintenance to bring it back to stage 0 (EGR, PCV, intake clean, etc) and then chip and pulley it!!

[Smooremin]

Do all the maintenance to bring it back to stage 0 (EGR, PCV, intake clean, etc) and then chip and pulley it!!

yeah CPO ends in 6 months so I am having everything looked at and replaced if needed. In the meantime, I get to drive a new A8 as my loaner :D

[SinCityA6]

Installed an EZ-Lip front spoiler and RS6 grill.

http://s12.postimg.org/x2ramgx6h/IMG_2326.jpg (http://postimg.org/image/x2ramgx6h/)

Looks good! The RS6 badge needs to go though, IMHO.


Sent from my iPhone using Tapatalk

[rollininstyle04]

Today I listed her for sale: http://www.audizine.com/forum/showthread.php/687092-FS-2006-Audi-A6-4-2-S-Line-Modified-Custom-Airlift-Accuair-AG-Wheels-Arc-Audio-Hybrid-Audio-Lots-More!

Time to do something different.

[SinCityA6]

Today I listed her for sale: http://www.audizine.com/forum/showthread.php/687092-FS-2006-Audi-A6-4-2-S-Line-Modified-Custom-Airlift-Accuair-AG-Wheels-Arc-Audio-Hybrid-Audio-Lots-More!

Time to do something different.

This makes me a little sad. You have been a solid contributor to the forum.

[rollininstyle04]

This makes me a little sad. You have been a solid contributor to the forum.

I will still poke my head in here from time to time to remind you all you can fit more aggressive wheels than most think :)

[A6AJ]

That's awesome and you'll love the conti's. My 6yo just told me to make mine to louder so she can hear it go faster lol

Sent from my VS985 4G using Tapatalk

Yep, making it louder will be the next priority. I had the Conti's out in snow earlier today and dang, they're awesome. Highly recommended.

[Daniel93]

I bought aluminium button console from Audi RS6 and aluminium pedals. Coming soon with installed button. http://imageshack.com/a/img905/9540/c1JXRb.jpghttp://imageshack.com/a/img910/9634/LqsfkH.jpg

[AFONE]

Started digging her out of the snowhttp://uploads.tapatalk-cdn.com/20160123/9508e1c460dcb2b016bda6e8de4f5edd.jpg


Sent from my iPhone using Tapatalk

[SinCityA6]

Wow!!!


Sent from my iPhone using Tapatalk

[SinCityA6]

Took her for a spirited run on a road in "Mexico".
http://uploads.tapatalk-cdn.com/20160123/f9ef2647b5362113c2df0ad7232fb94e.jpg


Sent from my iPhone using Tapatalk

[dufferdude]

Zoom zoom......

[kocyk123]

All cleaned up, white side bumper markers, tinted license plate cover:

https://dl.dropboxusercontent.com/u/62671585/Audi%20A6/fresh/3.jpg

https://dl.dropboxusercontent.com/u/62671585/Audi%20A6/fresh/2.jpg

https://dl.dropboxusercontent.com/u/62671585/Audi%20A6/fresh/1.jpg

[maga4]

^^^ Looks great!

[AFONE]

@Kockcy123, nice pics. Reminds me of alleys in Milwaukee


Sent from my iPad using Tapatalk

[SinCityA6]

Gave her a much needed bath.

http://uploads.tapatalk-cdn.com/20160124/0e00dc42292da3bf61836532088937ad.jpg


Sent from my iPhone using Tapatalk

[AFONE]

Looking good SinCityA6....still waiting to see the splitter mounted up


Sent from my iPad using Tapatalk

[grain370]

She's handling this weather perfectly.
http://uploads.tapatalk-cdn.com/20160124/d7476e1f9972414d9e3af9f75c1889e9.jpg


[QUOTE=kocyk123;11349571]All cleaned up, white side bumper markers, tinted license plate

Nice pics man! Like the clear park lights.


Sent from my iPhone using Tapatalk

[SinCityA6]

Looking good SinCityA6....still waiting to see the splitter mounted up


Sent from my iPad using Tapatalk

Yeah, me too!! Waiting for the weather to warm up a bit to get the clear bra peeled off the front. Then will mount the splitter.

[kocyk123]

^^^ Looks great!

Thanks!


@Kockcy123, nice pics. Reminds me of alleys in Milwaukee


Sent from my iPad using Tapatalk


Thanks!


She's handling this weather perfectly.
http://uploads.tapatalk-cdn.com/20160124/d7476e1f9972414d9e3af9f75c1889e9.jpg


[QUOTE=kocyk123;11349571]All cleaned up, white side bumper markers, tinted license plate

Nice pics man! Like the clear park lights.


Sent from my iPhone using Tapatalk

Thanks! They do make the car look much younger IMO :)

[cal3thousand]

Not today, but yesterday, I changed the oil on my 3.0T for the first time since buying it in November. I'm glad that I did not put it off any longer, because I found it was running with a Napa filter instead of a German made filter. It looked so strange that I had to Google and make sure my HU 722 Z was going to fit the motor.

https://dl.dropboxusercontent.com/u/16202085/20160123_145858.jpg



Not sure what kind of oil they had in there [:/]. I'm running Castrol Edge 0w40 505.00/502.00 now. One thing that I noticed with the 3.0T is that the oil fill port has moved towards the middle of the motor since my 1/4 turn funnel now hits the coolant reservoir. One torx screw and it was out of the way, but that wasn't necessary in the 3.2


https://dl.dropboxusercontent.com/u/16202085/20160123_145340.jpg



Also tried to change out the fuel filter with this new one that I had sitting here (before my 3.2 Avant was totaled). Pulled the fuel filter and then noticed that it was a 6 Bar and the new one I had for the 3.2 was only 4 Bar. Needless to say, I put the old one back on. Took 20 minutes tops and the fuel came out looking fresh, so I'm going to hold off for another oil change before sourcing a 6 Bar unit. I'll likely do it and the LPFP on the next maintenance round. [If you want an unused 4 Bar for a discount for your 3.2 LMK; P/N 4F0 201 511 D]. Note to anyone about to do this: you'll need 10mm socket, T25 torx bit on a socket wrench; long one won't fit, a bucket, rags, jack, strong fingers or pliers for pushing the buttons on the fuel line connectors to disconnect.



Swapped out the cabin filters as well. 10 minutes, maybe 15 because I had to go back inside and grab the shop vac to get all the leaves up.

[vajking]

Must be a "Euro" thing? Smh

Before I thought Americans had trashy style, now we Europeans are even worse :D
Trunk not in line with the side panels, exhaust pipes to far out, badges badges. He could pulled it off but instead it looks half finished.

[BluntAaronR]

Posted my '10 A6 3.0T Avant up for sale on avenues beyond Audizine. Little over a week on the Panjo market hasn't produced any interest :( I was hoping it would go to a fellow enthusiast.

[Basementrich]

Finally found a dencent lip for the facelift front bumper!!

http://http://i1074.photobucket.com/albums/w416/crackmcjack/Mobile%20Uploads/PSX_20160210_190228_zpswxpkukad.jpg (http://s1074.photobucket.com/user/crackmcjack/media/Mobile%20Uploads/PSX_20160210_190228_zpswxpkukad.jpg.html)http://http://i1074.photobucket.com/albums/w416/crackmcjack/Mobile%20Uploads/PSX_20160210_185122_zpsd2iwko7o.jpg (http://s1074.photobucket.com/user/crackmcjack/media/Mobile%20Uploads/PSX_20160210_185122_zpsd2iwko7o.jpg.html)

[mrismail]

Finally found a dencent lip for the facelift front bumper!!

http://http://i1074.photobucket.com/albums/w416/crackmcjack/Mobile%20Uploads/PSX_20160210_190228_zpswxpkukad.jpg (http://s1074.photobucket.com/user/crackmcjack/media/Mobile%20Uploads/PSX_20160210_190228_zpswxpkukad.jpg.html)http://http://i1074.photobucket.com/albums/w416/crackmcjack/Mobile%20Uploads/PSX_20160210_185122_zpsd2iwko7o.jpg (http://s1074.photobucket.com/user/crackmcjack/media/Mobile%20Uploads/PSX_20160210_185122_zpsd2iwko7o.jpg.html)

Looks great! Where did you get that from?

[Basementrich]

Looks great! Where did you get that from?
www.magnatuning.com

[Garryg]

Fitted some 19's and tinted the windows.....well not today, but at the weekend [:D]

http://i1010.photobucket.com/albums/af226/garryhg/AUDI%202.jpg (http://s1010.photobucket.com/user/garryhg/media/AUDI%202.jpg.html)

[SinCityA6]

Added the Carbon Fiber key fob cover...

http://uploads.tapatalk-cdn.com/20160212/bf76256229e2f82f013eb14cf815b74c.jpg


Sent from my iPhone using Tapatalk

[Daniel93]

http://imageshack.com/a/img921/1285/ELedmc.jpg one picture after cleaning :)

[seanentrust]

I wrecked it :( not awful but only owned her for 13 days and had a run in at a 4 way intersection with no stops and a honda accord :( I guess ill be getting that RS grille sooner than I planned on.

[cal3thousand]

Got around to installing glovebox, trunk and licence plate LEDs. The glove and trunk were cheap (<$1) and do the trick. They are 6000 K and match the footwell lights. The trunk was a weird one to mod because the circuit is controlled by some processor logic, or so it seems. Having the same issue as other people with it not coming on, I just tested the polarity of the glovebox light housing and arranged the LED for the trunk the same way (since trunk, glove, and puddle lights are the same), and reinstalled. The next day, I checked and it was working.

Here's what the COB LED for the trunk and glove is like (same one can be bought for <$1 shipped and some sellers are putting them at like $5 or more each, beware):
http://s29.postimg.org/n6xm81t2v/Ali_Express_Purchase_T10_W5_W_LED_COB_W16_W_COB_C. jpg



The license plate LEDs are BRIGHT!! Easily the brightest ones that I have used for license plate lights. Nice and clean 5000 K, like in the image. About $6.50 each shipped

http://s2.postimg.org/bxhjif27d/License_plate_Festoon_LED_Canbus.jpg

[SinCityA6]

I wrecked it :( not awful but only owned her for 13 days and had a run in at a 4 way intersection with no stops and a honda accord :( I guess ill be getting that RS grille sooner than I planned on.

Sorry to hear that but good job looking at the "silver lining" about the grill!


Sent from my iPhone using Tapatalk

[seanentrust]

Sorry to hear that but good job looking at the "silver lining" about the grill!


Sent from my iPhone using Tapatalk

the bummer is my deductible is $1000, i keep it high so that if i do get in an accident and its my fault i'm reminded of how much of an idiot i am :(

[M3andAMG]

Got around to installing glovebox, trunk and licence plate LEDs. The glove and trunk were cheap (<$1) and do the trick. They are 6000 K and match the footwell lights. The trunk was a weird one to mod because the circuit is controlled by some processor logic, or so it seems. Having the same issue as other people with it not coming on, I just tested the polarity of the glovebox light housing and arranged the LED for the trunk the same way (since trunk, glove, and puddle lights are the same), and reinstalled. The next day, I checked and it was working.

Here's what the COB LED for the trunk and glove is like (same one can be bought for <$1 shipped and some sellers are putting them at like $5 or more each, beware):
http://s29.postimg.org/n6xm81t2v/Ali_Express_Purchase_T10_W5_W_LED_COB_W16_W_COB_C. jpg



The license plate LEDs are BRIGHT!! Easily the brightest ones that I have used for license plate lights. Nice and clean 5000 K, like in the image. About $6.50 each shipped

http://s2.postimg.org/bxhjif27d/License_plate_Festoon_LED_Canbus.jpg

where did you buy the license plate lights?

[its___dale]

http://uploads.tapatalk-cdn.com/20160216/cea98a5b708250405c68c02a16232cfc.jpghttp://uploads.tapatalk-cdn.com/20160216/02553214f0e7c0007d92f02e9fb63cf1.jpg

Got some new wheels [emoji16][emoji16]

[domc20]

http://uploads.tapatalk-cdn.com/20160216/cea98a5b708250405c68c02a16232cfc.jpghttp://uploads.tapatalk-cdn.com/20160216/02553214f0e7c0007d92f02e9fb63cf1.jpg

Got some new wheels [emoji16][emoji16]
Nice[emoji106]...cv3?

Sent from my SAMSUNG-SM-N920A using Tapatalk

[cal3thousand]

where did you buy the license plate lights?

Aliexpress.com

http://www.aliexpress.com/item/2-x-New-36mm-Licese-Number-Plate-Light-Bulb-Canbus-LED-For-AUDI-A2-A3-8L/32337813408.html

[cal3thousand]

I replaced the door lock actuator on the passenger side. It was not unlocking any more.

Everything went well and took about 3 hours. I could do it in about 1.5 hours if I had to again. Only issue is that the alarm now does not chirp on lock. It acts as if a door is still open, but they are all locked. Going to do some research to see if I can figure it out. I may have to refurbish my OE actuator and reinstall that. Of course, that is after I find my VAG-COM cable and check out the faults.

[its___dale]

Nice[emoji106]...cv3?

Sent from my SAMSUNG-SM-N920A using Tapatalk

Yes [emoji23][emoji23] they need spacing out a bit though .. Will be happy with them after that

[domc20]

Yes [emoji23][emoji23] they need spacing out a bit though .. Will be happy with them after that
They look great

Sent from my SAMSUNG-SM-N920A using Tapatalk

[its___dale]

They look great

Sent from my SAMSUNG-SM-N920A using Tapatalk

Thanks [emoji109][emoji106]

[KBRUCE23]

@its_dale Looks good man!


Sent from my iPhone using Tapatalk

[ichi d]

http://uploads.tapatalk-cdn.com/20160216/cea98a5b708250405c68c02a16232cfc.jpghttp://uploads.tapatalk-cdn.com/20160216/02553214f0e7c0007d92f02e9fb63cf1.jpg

Got some new wheels [emoji16][emoji16]

u want to sell your old wheels to me?

[Nizmo]

http://i1055.photobucket.com/albums/s508/RustyNizmo/DSC02597_zpsagw43aun.jpg (http://s1055.photobucket.com/user/RustyNizmo/media/DSC02597_zpsagw43aun.jpg.html)

http://i1055.photobucket.com/albums/s508/RustyNizmo/DSC02603_zpszvhmcory.jpg (http://s1055.photobucket.com/user/RustyNizmo/media/DSC02603_zpszvhmcory.jpg.html)

[boywonder]

http://uploads.tapatalk-cdn.com/20160221/bde3c49b0349652b82536960ff486847.jpg

Went GIAC stage 2 today. Wow, what a difference. Now just waiting on the roc euro intake ..

[Nerdcore]

Hel all,

New here, the thing I did to my Audi yesterday was purchase it! I got a 2009 black on black Prestige 3.0T. So far I LOVE this thing.

A little background on my car history: I've had quite a few cars before this: 500whp Silverado, 2K Watt surround sound Escape, beater Ranger (with a racing seat for the driver and a 3.0 V6), 92 Corolla, E46 330ish (was a 325i and I swapped it to the striker M54B30 motor), and I also had a W8 and B5 A4. Currently my wife drives an 09 Mazda CX-7 with the 2.4T.

I have already de-badged and gutted the intake box. Also, have purchased LEDs for the interior which I am waiting to arrive. I need to get some aluminum and a TIG welder so I can weld up a new intake pipe. What I want to do is use the factory air box and just use a smooth piece of pipe to connect it to the throttle body.

I have a lot in store! I am excited!!

[SinCityA6]

Hel all,

New here, the thing I did to my Audi yesterday was purchase it! I got a 2009 black on black Prestige 3.0T. So far I LOVE this thing.

A little background on my car history: I've had quite a few cars before this: 500whp Silverado, 2K Watt surround sound Escape, beater Ranger (with a racing seat for the driver and a 3.0 V6), 92 Corolla, E46 330ish (was a 325i and I swapped it to the striker M54B30 motor), and I also had a W8 and B5 A4. Currently my wife drives an 09 Mazda CX-7 with the 2.4T.

I have already de-badged and gutted the intake box. Also, have purchased LEDs for the interior which I am waiting to arrive. I need to get some aluminum and a TIG welder so I can weld up a new intake pipe. What I want to do is use the factory air box and just use a smooth piece of pipe to connect it to the throttle body.

I have a lot in store! I am excited!!

Welcome to the Audi A6 club and the forum.

Please be advised that the first rule of this forum is: Pictures or it didn't happen! [:p]

[Nerdcore]

I guess if I have to
https://scontent-iad3-1.xx.fbcdn.net/hphotos-xpf1/t31.0-8/12710897_10152960450722185_2175507205373950709_o.j pg

https://scontent-iad3-1.xx.fbcdn.net/hphotos-xta1/t31.0-8/775132_10152960450137185_5924134672268100451_o.jpg

And then of course the FIRST thing I did (within an hour of getting home) was to rebadge.

https://scontent-iad3-1.xx.fbcdn.net/hphotos-xtl1/t31.0-8/12747954_10152964183067185_6838110841530793223_o.j pg

It has 107K on the clock and I got it for about $13. I was literally waiting at work to leave when I started surfing Autotrader and found this. Had I not found this I would be in a manual E39 525i Wagon with no where near the toys and about 30K more miles. My wife told me to find a car for $6,000, so instead I put $6,000 down on a car [evilsmile].

[AFONE]

Very nice Nerdcore! I'd say you got a steal at $13K. Well done!


Sent from my iPhone using Tapatalk

[ichi d]

great deal my a6 has just as much miles now and its been running strong.

[skylinrcr01]

Has anyone else noticed the resale on the C6's has tanked? My car has depreciated 6K over the last 1.5 years, and I've only put 20K miles on it.

[KBRUCE23]

I've definitely noticed. I was casually shopping around the past couple weeks and I wanted to see what I might be able to sell mine for privately and it's pretty disappointing.


Sent from my iPhone using Tapatalk

[SinCityA6]

Even though our model doesn't use the diesel motor, I think some of it is a result of the emissions scandal. It is not that the car has depreciated, it is that people are not buying them so sellers/dealers have to drop prices to move them.

With Consumer Reports naming Audi as top manufacturer, you may see prices tick up a bit.

Sent from my iPhone using Tapatalk

[KBRUCE23]

Yea I've kind of felt that may be the case. The c7 is also much more popular and pretty affordable. I feel that may have something to do with it as well


Sent from my iPhone using Tapatalk

[nyquetinp94]

http://uploads.tapatalk-cdn.com/20160302/6669427ac76d7ef4e486eb726b76d1df.jpg


Sent from my iPhone using Tapatalk

[Nizmo]

http://uploads.tapatalk-cdn.com/20160302/6669427ac76d7ef4e486eb726b76d1df.jpg


Sent from my iPhone using Tapatalk

The bag flap reduction reinforcement is nice :)

[mrismail]

http://uploads.tapatalk-cdn.com/20160302/6669427ac76d7ef4e486eb726b76d1df.jpg


Sent from my iPhone using Tapatalk

My $0.02, take that duct tape off immediately. It will leave tape marks on your paint that will not come off without destroying it. You're better off using the blue masking tape for temporary fix till you get your glass replaced. I'm sorry about your glass.

[jbrentd]

My $0.02, take that duct tape off immediately. It will leave tape marks on your paint that will not come off without destroying it. You're better off using the blue masking tape for temporary fix till you get your glass replaced. I'm sorry about your glass.

You said what I was thinking. That residue is nasty.

[Basementrich]

Just got my bumper back from the body shop!!! New lip is on and i shaved the side markers!


http://i1074.photobucket.com/albums/w416/crackmcjack/Mobile%20Uploads/PSX_20160310_002928_zpszm8gvcww.jpg (http://s1074.photobucket.com/user/crackmcjack/media/Mobile%20Uploads/PSX_20160310_002928_zpszm8gvcww.jpg.html)http://i1074.photobucket.com/albums/w416/crackmcjack/Mobile%20Uploads/PSX_20160310_003323_zpsq8lsdoto.jpg (http://s1074.photobucket.com/user/crackmcjack/media/Mobile%20Uploads/PSX_20160310_003323_zpsq8lsdoto.jpg.html)

[AFONE]

What did it cost to have the splitter shipped from Europe?


Sent from my iPhone using Tapatalk

[callaghan.]

Just got my bumper back from the body shop!!! New lip is on and i shaved the side markers!


http://i1074.photobucket.com/albums/w416/crackmcjack/Mobile%20Uploads/PSX_20160310_002928_zpszm8gvcww.jpg (http://s1074.photobucket.com/user/crackmcjack/media/Mobile%20Uploads/PSX_20160310_002928_zpszm8gvcww.jpg.html)http://i1074.photobucket.com/albums/w416/crackmcjack/Mobile%20Uploads/PSX_20160310_003323_zpsq8lsdoto.jpg (http://s1074.photobucket.com/user/crackmcjack/media/Mobile%20Uploads/PSX_20160310_003323_zpsq8lsdoto.jpg.html)

Beautiful! Looks amazing. You should go the extra distance and cut away the plastic behind the grill....makes a huge difference! I did mine in about 20 minutes with a dremel.

[Basementrich]

Beautiful! Looks amazing. You should go the extra distance and cut away the plastic behind the grill....makes a huge difference! I did mine in about 20 minutes with a dremel.

Haha I thought of that when i was putting it back together.. i had all of that painted to match for now. Does your rebar not just show now that its cut off ?

[Dutch_A6]

It would but you just paint it or dip it black to hide it. I used paint on mine but all the highway miles have sort of sand blasted it so next time I'm using black truck bedliner which won't go away and then it won't show through either.

Sent from my VS985 4G using Tapatalk

[SinCityA6]

+1 here. With the RS6 grill which doesn't have the plastic crossbar, you have to cover the silver crash bar. I too painted mine originally, but as @Dutch says, rock chips etc show through over time. I recently had mine wrapped in gloss black vinyl to prevent that from happening again.


Sent from my iPhone using Tapatalk

[cal3thousand]

I fixed the dipped bulb issue that came up after changing out to new Morimoto XBs. I must have not properly secured the connector during install, leaving it prone to disconnect after some bumps and right hand turns (AFS).

Good thing is that I can now remove the airbox, replace a bulb and button her back up in under 15 minutes.

I also picked up a fit kit to complete my Thule rack for my sedan since my RailGrabs don't work on it. I'll be posting them for sale if anyone is in search.

[skylinrcr01]

Got my rs grille in. :)http://i.imgur.com/c4WtyZx.jpg

[cal3thousand]

22694

Finally got it tinted. 15% Llumar CTX. Threw the rack on too

Sent from my SM-N910T using Tapatalk

[cal3thousand]

I loaded up the Thule Atlantis last night and left it on my car. Drove to work today and had to drive back home and unload the box. The stupid parking structure at work has a 6'2" clearance [>_<].

Took the opportunity to measure the height 7'3" and FTG height of a whopping 27.25"!! I need to get some lowness, stat.

[jbrentd]

Gave her a bath.

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/2194F238-640D-4D50-AECD-60512C5EEB7A.jpg

[skylinrcr01]

Gave her a bath.

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/2194F238-640D-4D50-AECD-60512C5EEB7A.jpg

Nice top box. :)

[callaghan.]

Haha I thought of that when i was putting it back together.. i had all of that painted to match for now. Does your rebar not just show now that its cut off ?

As stated above, yup, it's slightly visible.. I sprayed it flat black, 4 coats, and it's been good to go. Barely noticeable!

[callaghan.]

I loaded up the Thule Atlantis last night and left it on my car. Drove to work today and had to drive back home and unload the box. The stupid parking structure at work has a 6'2" clearance [>_<].

Took the opportunity to measure the height 7'3" and FTG height of a whopping 27.25"!! I need to get some lowness, stat.

Haha, the worst! You should check out the Thule Flow box, it's about 5" lower and still has a serious capacity.

[Quattrocentric]

Put my summers back on- yay spring!

[cal3thousand]

I didn't do anything to it, but I bought a bunch of stuff in preparation. I'm stoked because this was the week of great deals and I had just received my yearly bonus last week. So in the span of a few short days I got:


An ECS RS-style grille on their promotion ($150)
A new style large 'Quattro' badge for the grille, 42CM long!! ($30)
A 3-spoke steering wheel with Aluminum paddles off a B8 S4 for $120. A steal in my book, since the Al paddle upgrade costs about that much. (been wanting a 3 spoke for comfort)
OE primed rear diffuser and lip, was mis-priced on eBay for $85 shipped. Need to get it all painted.


Diffuser looks like this sickness:

[drool]

http://i1058.photobucket.com/albums/t406/eKKoMan/1bpj_zpsaf05c15b.jpg

I'll be posting up photos once it's all installed in a couple weeks. I'm so excited. I got it all for less than the price of the rear diffuser alone!

[ichi d]

Will that fit a s line rear bumper?

[cal3thousand]

Will that fit a s line rear bumper?
No, only standard

Sent from my SM-N910T using Audizine mobile app

[SinCityA6]

No, only standard

Sent from my SM-N910T using Audizine mobile app

Link please!!

[cal3thousand]

Link please!!
Unfortunately, there was only one. It was listed as a front blade, but I could clearly see in the photos that it was these 2 pieces and the PN was on one of the photos.

Here's the link for S&G

http://www.ebay.com/itm/381572567820




Sent from my SM-N910T using Tapatalk

[AFONE]

Very nice score cal3thousand! That is a $460 part.

http://www.worldimpex.com/parts/genuine-part-diffuser_971000.html


Sent from my iPhone using Tapatalk

[cal3thousand]

Man, it's quiet in here. I guess most are just not posting about what they are doing?

I received my [s4] steering wheel and started cleaning it. Took it apart and wiped out all the cracks with alcohol. Gotta get that last dude's dead skin out of there[o_o]. I also used MGK sneaker cleaner for the threads and leather. I figure if it's ok for my leather shoes, it should be fine for the wheel. It actually did a decent job in restoring the red to the threads; They were dull from oils and dirt. Followed up with Detailers Pro Interior Cleaner. I'll hit it with some UIGP before I install it this weekend.

[SinCityA6]

Man, it's quiet in here. I guess most are just not posting about what they are doing?

I received my [s4] steering wheel and started cleaning it. Took it apart and wiped out all the cracks with alcohol. Gotta get that last dude's dead skin out of there[o_o]. I also used MGK sneaker cleaner for the threads and leather. I figure if it's ok for my leather shoes, it should be fine for the wheel. It actually did a decent job in restoring the red to the threads; They were dull from oils and dirt. Followed up with Detailers Pro Interior Cleaner. I'll hit it with some UIGP before I install it this weekend.

1st rule....PICS OR IT DIDN'T HAPPEN!

[cal3thousand]

^ I'll keep that in mind when I post my install this weekend [emoji3] .

The only shot I got cleaning the wheel was on the wife's phone and was just a lame shot of me cleaning it.

Sent from my SM-N910T using Audizine mobile app

[c@@kieMonsta]

http://uploads.tapatalk-cdn.com/20160408/8a8dcb38ee1e48381942e807bdb64201.jpghttp://uploads.tapatalk-cdn.com/20160408/56210431d16be8df88984f2eb0c5b9fc.jpg

Figured it was about time to show my C6.5. It's a work in progress!

Sent from my Nexus 6P using Tapatalk

[cal3thousand]

^Exactly like my car... except your car's ass and wheels are better. (I really miss my Avant if you can't tell)

[c@@kieMonsta]

^Exactly like my car... except your car's ass and wheels are better. (I really miss my Avant if you can't tell)

I was trying to be modest, no ass showing I promise haha. Yeah the wheels are C7 19's that I got off of CL for $600 with 50% left on the tires. No a single scratch on em anywhere!

[cal3thousand]

^ Sweet deal!

And in the spirit of "pics or it didn't happen": the diffuser arrived and is exactly as expected. [emoji2]

http://uploads.tapatalk-cdn.com/20160409/0c80647517ee00d64c5eec809aad7738.jpg

http://uploads.tapatalk-cdn.com/20160409/b506edcd6aadfc9d0d4e269cd2603035.jpg

Sent from my SM-N910T using Tapatalk

[jbrentd]

I hope to have a few things to report tomorrow. A few maintenance items and a couple aesthetic items. Here's a pic to tide you over.

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/15106BD6-BC38-4797-9226-E94313184A95.jpg

[KBRUCE23]

@jbrentd I'm curious to see how you mount the cupra lip, I got mine a few weeks ago and I couldn't decide where I wanted it so I'm still messing around with it. Also got some b8 "door blades" I've got to get painted and then mounted


Sent from my iPhone using Tapatalk

[jbrentd]

@jbrentd I'm curious to see how you mount the cupra lip, I got mine a few weeks ago and I couldn't decide where I wanted it so I'm still messing around with it. Also got some b8 "door blades" I've got to get painted and then mounted


Sent from my iPhone using Tapatalk

I have some ideas, but will be sure to report back.

[SinCityA6]

So all this posting of upcoming mods is REALLY making me to want to get off my lazy ass and install the front splitter!! Plus, @cal3thousand, I want to see how the rear diffuser looks as I may end up ponying up for one of those as well. Albeit not at the steal (um deal) that you got!


Sent from my iPhone using Tapatalk

[cal3thousand]

So all this posting of upcoming mods is REALLY making me to want to get off my lazy ass and install the front splitter!! Plus, @cal3thousand, I want to see how the rear diffuser looks as I may end up ponying up for one of those as well. Albeit not at the steal (um deal) that you got!


Sent from my iPhone using Tapatalk
Do eeeeet!

I need some front end inspiration.

Sent from my SM-N910T using Tapatalk

[jbrentd]

Swapped my old grill for an S6 grill and installed a Cupra R lip.

Also changed plug and air filter.

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/9C314AE7-E1BC-4D29-B51C-7357ED4139CD.jpg

[cal3thousand]

New LED fogs, LED corner turn signals, and wrapped the amber bumper light in black gloss scotch print 1080

http://uploads.tapatalk-cdn.com/20160410/23d321245b9fb7bd1098ee5564e8bc57.jpg

Here's a shot at night with the walk me home activated.

http://uploads.tapatalk-cdn.com/20160410/1528d208977498569bb3029f7efbdb1a.jpg


Sent from my SM-N910T using Tapatalk

[seanentrust]

New LED fogs, LED corner turn signals, and wrapped the amber bumper light in black gloss scotch print 1080

http://uploads.tapatalk-cdn.com/20160410/23d321245b9fb7bd1098ee5564e8bc57.jpg



Sent from my SM-N910T using Tapatalk

nice! Im doing that to my orange markers this week!

[R0B3RTS23]

Swapped my old grill for an S6 grill and installed a Cupra R lip.

Also changed plug and air filter.

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/9C314AE7-E1BC-4D29-B51C-7357ED4139CD.jpg

Which bumper is that? Do you have a picture before the lip was put on? I'm curious to see if it's the same as mine. I can't find a lip anywhere for it.

[ichi d]

Can u post a link where u got the led turn signal? And is there any error codes? Thanks
New LED fogs, LED corner turn signals, and wrapped the amber bumper light in black gloss scotch print 1080

http://uploads.tapatalk-cdn.com/20160410/23d321245b9fb7bd1098ee5564e8bc57.jpg

Here's a shot at night with the walk me home activated.

http://uploads.tapatalk-cdn.com/20160410/1528d208977498569bb3029f7efbdb1a.jpg


Sent from my SM-N910T using Tapatalk

[Mickmerr62]

Hi Cal3, I'm looking for some smoke side markers however I like what you've done.

Where did you get the tape from and is it an easy process to remove the lens and wrap.

Thanks

[jbrentd]

Which bumper is that? Do you have a picture before the lip was put on? I'm curious to see if it's the same as mine. I can't find a lip anywhere for it.

It's just the standard non-S-line bumper.

Before
http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/15106BD6-BC38-4797-9226-E94313184A95.jpg

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/197F6446-B60F-44AB-9617-3989DFA99D0D_zps8yzz1xov.jpg

After
http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/9C314AE7-E1BC-4D29-B51C-7357ED4139CD.jpg

[R0B3RTS23]

It's just the standard non-S-line bumper.

Before
http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/15106BD6-BC38-4797-9226-E94313184A95.jpg

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/197F6446-B60F-44AB-9617-3989DFA99D0D_zps8yzz1xov.jpg

After
http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/9C314AE7-E1BC-4D29-B51C-7357ED4139CD.jpg

Oh sweet, that's what I have. Was it easy to attach to the bumper? Do you by any chance have a link to where you got yours?

[jbrentd]

Oh sweet, that's what I have. Was it easy to attach to the bumper? Do you by any chance have a link to where you got yours?

It was easy to attach. I used self tapping screws. I also sanded down the top of the lips so they would sit flush with the bumper.

I got it from ECS.

https://www.ecstuning.com/b-genuine-european-volkswagen-audi-parts/cupra-r-lip-spoiler/1ml805903~oee/

Note: the shape of the underside of the standard bumper does cause a small gap between the lip and the bumper for just a section of about 6 or so inches.

[R0B3RTS23]

It was easy to attach. I used self tapping screws. I also sanded down the top of the lips so they would sit flush with the bumper.

I got it from ECS.

https://www.ecstuning.com/b-genuine-european-volkswagen-audi-parts/cupra-r-lip-spoiler/1ml805903~oee/

Note: the shape of the underside of the standard bumper does cause a small gap between the lip and the bumper for just a section of about 6 or so inches.
Sweet, You're awesome.

[cal3thousand]

Hi Cal3, I'm looking for some smoke side markers however I like what you've done.

Where did you get the tape from and is it an easy process to remove the lens and wrap.

Thanks
It's available everywhere including eBay. But I have a bunch already. Hmm... come to think of it, if you want 2 strips to cover those lights I could sell them cheap and put it in an envelope.

And it took less than 10 minutes to do. A heat gun is nice to have but not really necessary on this wrap since it's not a complex shape. And it's reversible in under a minute.

I still need to get in there with VCDS and program those lights off. There's an amber glow around the edges at night [emoji3]

Sent from my SM-N910T using Tapatalk

[Mickmerr62]

I wish I'd seen this earlier, I have actually already ordered a piece frm eBay. I don't have VCDS, I actually got the Carista app but for the life of me, I cannot see how to disable the amber on there's

Thanks for your support.

[cal3thousand]

I wish I'd seen this earlier, I have actually already ordered a piece frm eBay. I don't have VCDS, I actually got the Carista app but for the life of me, I cannot see how to disable the amber on there's

Thanks for your support.
Carista only does a subset of what VCDS can.

Sent from my SM-N910T using Tapatalk

[Mickmerr62]

Yes I primarily signed up for a service reset, and simple adjustments, dial sweep, closure functions etc.

I guess I'll have to find someone in my area with access to one.

Thanks again.

[swoboda84]

http://i1172.photobucket.com/albums/r573/swoboda1984/%202_zps24mec2sf.jpg

http://i1172.photobucket.com/albums/r573/swoboda1984/IMG_20160409_165852_1_zpsvytmllds.jpg

http://i1172.photobucket.com/albums/r573/swoboda1984/_1_zps9df69exe.jpg

[:D][:D][:D][a6]

[cal3thousand]

^I can't see those photos.

Edit: I can see em now.

Cool shots!!!!


Sent from my SM-N910T using Tapatalk

[SinCityA6]

Swapped my old grill for an S6 grill and installed a Cupra R lip.

Also changed plug and air filter.

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/9C314AE7-E1BC-4D29-B51C-7357ED4139CD.jpg

Grill looks good. Can you post a pic of the front from a lower angle?

[jbrentd]

Grill looks good. Can you post a pic of the front from a lower angle?

Not the best pictures, but hopefully they'll do. My car is DIRTY!

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/6D5DFA74-D016-4C66-AEAC-8F3E4DBEC559.jpg

http://i176.photobucket.com/albums/w192/jbrentd/2007%20A6/EE74AA3B-7FE7-4D91-BC77-74D4E6DFCEFA.jpg

[swoboda84]

^I can't see those photos.


put them to another pic hosting.

[SinCityA6]

^I can't see those photos.

Sent from my SM-N910T using Tapatalk

Comes through fine here.

[cal3thousand]

Can u post a link where u got the led turn signal? And is there any error codes? Thanks
I can't find the link for the life of me. And now I'm not exactly sure where I got them. They were coding and hyper flashing the first night, but have not tonight. I will keep looking for the listing and post up whether or not they code again.

The fogs definitely code and I need to install the error cancellers that I bought.

And I have never found an LED that does not flash during cold diagnosis. And I have never found the option to disable that on a C6. [emoji35]

Sent from my SM-N910T using Tapatalk

[cal3thousand]

http://uploads.tapatalk-cdn.com/20160411/c348ba88573514dcfcfc58e7a2f594cb.jpg

Replaced the start button that was peeling. I had some vinyl wrap over the button, but now have a legit version.

That said, I have a used "new" style button for sale for cheap does $35 sound reasonable for this? Trying to find out where I should start the ebay listing.

http://uploads.tapatalk-cdn.com/20160411/fa0f5549d975c2e3e23b4f33fdff2a5c.jpg

Sent from my SM-N910T using Tapatalk

[cal3thousand]

Can u post a link where u got the led turn signal? And is there any error codes? Thanks

Found the listing! http://www.aliexpress.com/item/2x-High-Power-CREE-6-SMD-T25-3157-LED-Bulbs-For-Turn-Signal-Brake-Bulbs-Brake/32500206669.html

So, apparently I didn't even order an error-free set of bulbs. And after driving a full commute, I can tell you when they will throw an error. If you let it blink for longer than 30 seconds, you will get a code and likely a hyperflash. But turning the signal off for a second and then back on, it will hyperflash for 2-3 seconds and then return back to "normal" unless you let it go for another 30 seconds. In reality, this is only annoying when you are at a light and leave the blinker on. As a side benefit, you get a nice ugly warning if you leave the blinker in the on position for too long. I feel like this should be standard equipment in some cars in my area [:/]

I do have a set of error canceller resistors that I can install. Depends on if I like this 'feature' over the next week or if I get annoyed with it. We'll see...

Oh, and BTW, I found a killer deal on Mobil One 0w-40 European if you guys want ($13 after rebate for 5 Qts) . I personally use Castrol, but I bought some for my Volvo. At $13, it's a no brainer. Slickdeals FTMFW (http://slickdeals.net/f/8536019-5-quart-mobil-1-full-synthetic-motor-oil-various-models-grades-from-13-50-after-12-rebate-free-store-pickup?p=83747966&utm_source=dealalerts&utm_medium=em-i&utm_term=18012&utm_content=u937192&utm_campaign=tu-9999&src=da_10640432)

[mrismail]

Let me brother borrow my car yesterday, he managed to scuff 3 rims. He will never drive my car, again! Sanded, cleaned and redipped 3 of the wheels.


The only wheel that wasnt scuffed up.
http://s21.postimg.org/lkto6t3vr/20160411_140158.jpg

Peeled all the dip and started the cleaning process
http://s23.postimg.org/o9h93pq57/20160411_140148.jpg

Clean wheels
http://s29.postimg.org/g94c6z00n/20160411_140152.jpg
http://s30.postimg.org/9kzni3y9t/20160411_143434.jpg

Dipping
http://s16.postimg.org/nfau4w5id/20160411_152359.jpg

Final finish, also, got bored and removed some dip off the center caps. Not sure how I feel cause there's chrome!
http://s22.postimg.org/ac0n6f5ch/20160411_175700.jpg

[se.farrell]

Pulled the old (very tired looking) black dip off and put on the new Bronze AUTODIP.

Only 1 quick picture from before work this morning. But I will try to get a full write up on the stuff.

Anyways...
http://i1289.photobucket.com/albums/b507/sefarrell614/IMG_0347_zpszqmch1cc.jpg (http://s1289.photobucket.com/user/sefarrell614/media/IMG_0347_zpszqmch1cc.jpg.html)

[SinCityA6]

I am diggin the look!


Sent from my iPhone using Tapatalk

[SinCityA6]

Getting the clear bra removed after being on for almost 7 years. Hoping that paint doesn't come off with it. Fingers crossed


Sent from my iPhone using Tapatalk

[skylinrcr01]

Pulled the old (very tired looking) black dip off and put on the new Bronze AUTODIP.

Only 1 quick picture from before work this morning. But I will try to get a full write up on the stuff.

Anyways...
http://i1289.photobucket.com/albums/b507/sefarrell614/IMG_0347_zpszqmch1cc.jpg (http://s1289.photobucket.com/user/sefarrell614/media/IMG_0347_zpszqmch1cc.jpg.html)

What's autodip? I want a different look for my rims.

Also, good luck Sin!

[se.farrell]

What's autodip? I want a different look for my rims.

Also, good luck Sin!

Got an alignment today.
-Chris @ West End Alignment in the LA area is great. Took all the time he needed to get things perfect and once complete he had me drive it a few times so that everything could be tweaked into perfection. 5/5 will definitely go back!


@skylinrcr01
http://www.autodip.com
It is basically plasti-dip. The difference is that instead of being like plasti-dip, which has a rubber base, auto-dip has a vinyl base. The end result is a smoother glossier finish. Once I post outdoor pics you will see a NOTICABLE difference. I really like the stuff. From initial use it was just as easy, if not easier to use than plasti-dip.

[skylinrcr01]

Got an alignment today.
-Chris @ West End Alignment in the LA area is great. Took all the time he needed to get things perfect and once complete he had me drive it a few times so that everything could be tweaked into perfection. 5/5 will definitely go back!


@skylinrcr01
http://www.autodip.com
It is basically plasti-dip. The difference is that instead of being like plasti-dip, which has a rubber base, auto-dip has a vinyl base. The end result is a smoother glossier finish. Once I post outdoor pics you will see a NOTICABLE difference. I really like the stuff. From initial use it was just as easy, if not easier to use than plasti-dip.

Thanks.

+1 for west end. They were the go to shop for my s2k as well as most of my friend's cars.

[SinCityA6]

Clear bra is off and no paint issues. Whew! Now on to installing the front splitter.

http://uploads.tapatalk-cdn.com/20160413/009ff5b4cb521fabc92e511c50248b22.jpg
http://uploads.tapatalk-cdn.com/20160413/f0ef4c2248f67e122cf3a94adb6945fe.jpg
http://uploads.tapatalk-cdn.com/20160413/7ee387c34dc32cc2f0fe48709f6c6ead.jpg


Sent from my iPhone using Tapatalk

[ichi d]

i got my popcorn ready.

[SinCityA6]

Alright. Here it is.... Had the splitter painted Ibis white to match the car and wrapped the blade in gloss black. More detailed info in my mod thread.
http://uploads.tapatalk-cdn.com/20160414/ad5f0bc58932f9394233d4d42dea50fd.jpg
http://uploads.tapatalk-cdn.com/20160414/88b39b5d158290fdc114bdf42a1f62a8.jpg
http://uploads.tapatalk-cdn.com/20160414/c31b939828d037ae2cd5fadd4d800614.jpg


Sent from my iPhone using Tapatalk

[jbrentd]

Looks good!

[SinCityA6]

Looks good!

Thanks!

Oh, and thanks to my parts pimp, @afone, just bought the OEM lower rear valance spoiler.

[KBRUCE23]

Looks really good @sincitya6, I like it!


Sent from my iPhone using Tapatalk

[AFONE]

Thanks!

Oh, and thanks to my parts pimp, @afone, just bought the OEM lower rear valance spoiler.

No problem Sin. I'm always happy to spend your money for ya!


Sent from my iPhone using Tapatalk

[SinCityA6]

No problem Sin. I'm always happy to spend your money for ya!


Sent from my iPhone using Tapatalk

Thanks, buddy!!

[cal3thousand]

Sin, your car is rockin now. 2 questions:

Where did you get the splitter parts? Blades seem plentiful but the other 2 pieces are hard to find in stock.


What are you planning to paint the rear valance?

Sent from my SM-N910T using Tapatalk

[SinCityA6]

Sin, your car is rockin now. 2 questions:

Where did you get the splitter parts? Blades seem plentiful but the other 2 pieces are hard to find in stock.


What are you planning to paint the rear valance?

Sent from my SM-N910T using Tapatalk

I bought both the splitter (last one) and blade from Amazon. I got the blade for $22 (a steal) and the splitter was $460.

I am going to paint match the rear valance to the car (Ibis white) and then wrap the valance spoiler black.

[SinCityA6]

^ Sweet deal!

And in the spirit of "pics or it didn't happen": the diffuser arrived and is exactly as expected. [emoji2]

http://uploads.tapatalk-cdn.com/20160409/0c80647517ee00d64c5eec809aad7738.jpg

Sent from my SM-N910T using Tapatalk

@cal3thousand - can you shoot me a pic of the rear diffuser as if you were looking at it from the rear when mounted? I am about to spend more money......