*** Official B8 A5/S5/RS5 Aftermarket Wheel Gallery ***

[SEPANG]

http://www.flickr.com/photos/hrewheels/10029156594/

[Brick Oven]

Love that color combo SEPANG

[adbender]

21313

Despise winter. Finally got a shot of some clean 19" CH-Rs...

[mstager]

http://duke.1g.fi/kuvat/Events/2015/W%C3%B6rthersee/IMG_3437.JPG?img=img1280

More on Instagram @dukeworks or Facebook: Dukeworks Photography, please take a visit :)

Oh and project topic here http://www.a5oc.com/forums/build-threads/46513-imola-yellow-3-0-a.html


I was curious to the offset of your 20's I just picked up a set of WCI MT10 3 piece wheels that are 20x10.5 et12 rear and et 18 front. I am on air and am wondering if they are going to tuck or if the rears are going to sit on lip. Please respond quickly so I can cancel my order if they are too low of offset

[Jester2893]

I was curious to the offset of your 20's I just picked up a set of WCI MT10 3 piece wheels that are 20x10.5 et12 rear and et 18 front. I am on air and am wondering if they are going to tuck or if the rears are going to sit on lip. Please respond quickly so I can cancel my order if they are too low of offset

Those offsets should be fine honestly you might still need a small spacer to dial the fitment down a little tighter depending on tire stretch and what you desire.


I ran 19x10 et 5 and 19x10 et 10 and my rear fitment was spot on, the front tucked ever so slightly.

Google will they fit and plug in my numbers with your new wheels numbers and see what it comes up.

[The_Undrdg]

New Member, so I thought I would post some photos and share my wheel specs.

- Vossen LC-105T
- 20"x10.5"
- et 30
- Full Polished (un-clear) with a Machined Diamond Cut Face
- Toyo Proxes T-1 Sport Series Tires | 255/30ZR20


https://farm2.staticflickr.com/1534/23528939134_5571837fa1_k.jpg

https://farm2.staticflickr.com/1446/24049057862_b301f691a7_k.jpg

https://farm2.staticflickr.com/1658/23789326989_2cc7fee0bb_k.jpg

https://farm2.staticflickr.com/1559/24074532511_459674f7ee_k.jpg

https://farm2.staticflickr.com/1703/24157138375_c3c6e9cb06_k.jpg

https://farm2.staticflickr.com/1691/23528937714_6a4994c549_k.jpg

[miked1978]

looks sharp! welcome.

[DreDay]

@The_Undrdg looks awesome. Usually not a light bar guy but yours caught my eye.


Sent from my iPhone using Tapatalk

[DUBV_A5]

http://uploads.tapatalk-cdn.com/20160203/83f58a77f64d07771f2c152152af9628.jpg
Got my 19x9.5 710s in phantom black powdercoat in today and I love them. Can't wait to get them on. Big thanks goes out to Mops for helping with these


Sent from my iPhone using Tapatalk

[HRE Wheels]

Figured I would put some up here as well [:)]

Audi RS5 with HRE P101 Wheels in Gloss Black - TAG Motorsports

https://c2.staticflickr.com/4/3869/14414074984_34353196df_b.jpg

https://c2.staticflickr.com/4/3896/14435411193_90d414d575_b.jpg

https://c1.staticflickr.com/3/2910/14411877641_47d1db8fed_b.jpg

https://c2.staticflickr.com/4/3903/14228788277_df423a599d_b.jpg

[pr-dc2r-b8s5]

just installed my Avant Garde m590 in 20x10 +25 i purchased from wheelwarehouse! needs drop and 5mm spacer in rear..the lowered one is a photoshop of how i want it to look. lol


http://i68.tinypic.com/258w6e0.jpg

http://i65.tinypic.com/n6p46a.jpg

[miked1978]

Figured I would put some up here as well [:)]

Audi RS5 with HRE P101 Wheels in Gloss Black - TAG Motorsports

https://c2.staticflickr.com/4/3869/14414074984_34353196df_b.jpg

https://c2.staticflickr.com/4/3896/14435411193_90d414d575_b.jpg

https://c1.staticflickr.com/3/2910/14411877641_47d1db8fed_b.jpg

https://c2.staticflickr.com/4/3903/14228788277_df423a599d_b.jpg


what size are these and the tires?

[RbcVfy723]

Audi S5 cab
Vorsteiner VFF-103 Carbon Graphite
20x10, et30 (adding 12mm rear spacers soon)
Stock suspension

Thanks Mops! - SupremePower

http://uploads.tapatalk-cdn.com/20160208/f6f111d515dd05cf8b1529f24798bbf6.jpg
http://uploads.tapatalk-cdn.com/20160208/488a528c7fd2e2cb76d32fb51a713a1b.jpg
http://uploads.tapatalk-cdn.com/20160208/c0bda7710e234d4b875aa36a2a91630f.jpg
http://uploads.tapatalk-cdn.com/20160208/2341ef31c4a8438ad98aced78e8c990a.jpg
http://uploads.tapatalk-cdn.com/20160208/268b11f00dd04e4a3a11a688a03f260d.jpg


2012 S5 Cabrio, Monsoon Grey, APR Stage 2, 20x10 Vorsteiner VFF-103, Spectra Photosync 50% all around

[Mops@Nemesis]

^Looks really good Rico! More than happy to have helped [up]

[mstager]

http://uploads.tapatalk-cdn.com/20160208/83144304fd52800ddc213ed0ac0f8ea2.jpg

20x10.5 Art In Motion Wheels in custom brass finish going on my Audi A5

Sent from my LG-H810 using Audizine mobile app

[mstager]

New Member, so I thought I would post some photos and share my wheel specs.

- Vossen LC-105T
- 20"x10.5"
- et 30
- Full Polished (un-clear) with a Machined Diamond Cut Face
- Toyo Proxes T-1 Sport Series Tires | 255/30ZR20


https://farm2.staticflickr.com/1534/23528939134_5571837fa1_k.jpg

https://farm2.staticflickr.com/1446/24049057862_b301f691a7_k.jpg

https://farm2.staticflickr.com/1658/23789326989_2cc7fee0bb_k.jpg

https://farm2.staticflickr.com/1559/24074532511_459674f7ee_k.jpg

https://farm2.staticflickr.com/1703/24157138375_c3c6e9cb06_k.jpg

https://farm2.staticflickr.com/1691/23528937714_6a4994c549_k.jpg
Hey is that a Reiger RS5 bumper? I just got mine delivered. How well did it fit up

Sent from my LG-H810 using Audizine mobile app

[mstager]

I guess after owning these wheels for 2 1/2 years, I'll report in... HRE S101 20"x10.5" et35 front et30 rear, Toyo Proxes 4+ 275/30-20 [s5]
https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-prn2/t31.0-0/p640x640/10497850_10153129459643287_4166182839456525849_o.j pg
https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-frc3/t31.0-0/p640x640/10896158_10153129459778287_976870582279912522_o.jp g
https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-xtf1/t31.0-0/p640x640/980626_10152423662183287_3446045073486556847_o.jpg
https://scontent.fsnc1-1.fna.fbcdn.net/hphotos-prn2/t31.0-0/p640x640/10683425_10153129460098287_8951803262390612683_o.j pg
How do you like those tires? On on the fence on what tires to run in 275/30-20.

Sent from my LG-H810 using Audizine mobile app

[mstager]

http://www.audizine.com/gallery/data/561/medium/11995313_10153628515638988_571334726_o.jpg
10.5x20 et25 stance7 275/30-20 achilles. Hr springs
Can I have your honest opinion on your tire choice

Sent from my LG-H810 using Audizine mobile app

[mstager]

Anyone bagged running 20" and not tucking wheel? I am trying to decide 19" versus 20" because I dont want to tuck the wheel. I plan on sitting it flush to the fender, but as far as I can see this doesn't seem possible on a 20" as it just gets tucked down way to much.

Granted I know only a handful of us are bagged on here but anyone got any experience with this?


This a bagged b8 series car with a 20" wheel see how the fender tucks the upper edge of the wheel? I am trying to achieve it so my fender stops at the top of the fender when I am fully aired out and I wanna say going with a 19" is the only way?

https://avantgardewheels.files.wordpress.com/2014/03/m590-satin-silver-audi-a4-avant-iacrophobia-accuair-wheel.jpg?w=1536
http://uploads.tapatalk-cdn.com/20160208/2dd5b8f36f46b972bf93f73b71d92755.jpg

This is me aired completely down on 20x10.5 et27

Sent from my LG-H810 using Audizine mobile app

[DUBV_A5]

Finally got the wheels mounted up and love how they look I think I may need some spacer and possibly some OE Sport springs. Input?http://uploads.tapatalk-cdn.com/20160210/82daf7fad023225dba931c2e8a474604.jpghttp://uploads.tapatalk-cdn.com/20160210/aea6ec42a2bf01984695f6933684871a.jpghttp://uploads.tapatalk-cdn.com/20160210/571a3791901462c6fbd4b207097c21b6.jpg


Sent from my iPhone using Tapatalk

[Mops@Nemesis]

Love that custom finish! Nice job. Spacers would change the look at lot for the better, and I would recommend the KW HAS. They are a good $400 over the H&R, but they ride so much better, and you can adjust the ride height.

[DUBV_A5]

Love that custom finish! Nice job. Spacers would change the look at lot for the better, and I would recommend the KW HAS. They are a good $400 over the H&R, but they ride so much better, and you can adjust the ride height.

How big of a spacers do you think i would need?

[Mops@Nemesis]

How big of a spacers do you think i would need?

What size tire did you end up with?

[DUBV_A5]

Ended up going 255/35/19


Sent from my iPhone using Tapatalk

[Mops@Nemesis]

9.5 ET33 on 255.... Here is 9.5 ET36 with 10/15 and 25mm drop...

https://farm9.staticflickr.com/8223/8433729867_c54a441022_b.jpg (https://flic.kr/p/dRg54D)271077_629162945938_68701307_33265461_31612 84_n (https://flic.kr/p/dRg54D) by Audiyos (https://www.flickr.com/photos/91999203@N06/), on Flickr

So 10/15 would be perfect I think for nice rub free aggressive fit.

[talkinghamster]

S5 Wrapped Matte Red on Rotiform Wheels[up]
https://farm2.staticflickr.com/1651/23850816059_b461626011_z.jpg
https://farm2.staticflickr.com/1702/24192563266_9b73429cd3_z.jpg

any high res versions

[miked1978]

damn car washes are tearing up my factory rotors... anyone else have this issue? almost like it peels off a clear coat layer on the edge of the rim. all the little bumps and knicks are driving me nuts on this 3 month old car.

[i1overice]

Nah because we don't take our cars to car washes that have tracks... :)

[miked1978]

Nah because we don't take our cars to car washes that have tracks... :)

new to this game and learning the hard way on things I guess.

[Mean Machine]

new to this game and learning the hard way on things I guess.

Been there done that too - hand wash only

[rymofo]

Love the OEM+ look this seller achieved

http://i296.photobucket.com/albums/mm163/ryjk2011/9481880E-74C7-4548-A03C-B3C7DC957764.png_zpsha64geez.jpeg (http://s296.photobucket.com/user/ryjk2011/media/9481880E-74C7-4548-A03C-B3C7DC957764.png_zpsha64geez.jpeg.html)

[jamin_00]

Need to raise the car after putting these on tonight but man they look friggin awesome if I do say so myself :)

Will get some decent pics tomorrow when raised and daylight :)

http://i602.photobucket.com/albums/tt108/jamin00/Car/2016-02-12%2020.33.11_zps5e1qnndi.jpg (http://s602.photobucket.com/user/jamin00/media/Car/2016-02-12%2020.33.11_zps5e1qnndi.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/2016-02-12%2022.48.07_zpsk9haf33j.jpg (http://s602.photobucket.com/user/jamin00/media/Car/2016-02-12%2022.48.07_zpsk9haf33j.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/2016-02-12%2022.48.14_zpsuymqegyf.jpg (http://s602.photobucket.com/user/jamin00/media/Car/2016-02-12%2022.48.14_zpsuymqegyf.jpg.html)

[rymofo]

^favorite color combo and wheels. If I were to do it again I'd get white so I can have that exact setup. Very nice sir!

[drdrewusaf]

Vorsteiner VFF-103 20X10 et30, 3mm spacers on the rear. Michelin PSS 285/30/20 K1/Ferrari Spec.

http://i.imgur.com/7mJ4CmI.jpg
http://i.imgur.com/2sC4sXm.jpg


Drew

[DreDay]

Looks nice @jamin_00 I like those wheels.

@drdrewusaf excellent job on this one. Figment is awesome




Sent from my iPhone using Tapatalk

[KPolo]

http://uploads.tapatalk-cdn.com/20160208/83144304fd52800ddc213ed0ac0f8ea2.jpg

20x10.5 Art In Motion Wheels in custom brass finish going on my Audi A5

Sent from my LG-H810 using Audizine mobile app

Wow, can't wait to see this mounted

[jamin_00]

^favorite color combo and wheels. If I were to do it again I'd get white so I can have that exact setup. Very nice sir!

White and satin bronze, does go well :)

Going to put the 285's off the Ferrada's on to the Vossen and the 295's off the Vossen to the Ferrada's. Think they will be better suited that way

http://i602.photobucket.com/albums/tt108/jamin00/Car/2016-02-13%2010.48.40_zpsxykzabjn.jpg (http://s602.photobucket.com/user/jamin00/media/Car/2016-02-13%2010.48.40_zpsxykzabjn.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/2016-02-13%2010.48.32_zpsgrftwmjp.jpg (http://s602.photobucket.com/user/jamin00/media/Car/2016-02-13%2010.48.32_zpsgrftwmjp.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/2016-02-13%2009.12.33_zpsdmncdv0k.jpg (http://s602.photobucket.com/user/jamin00/media/Car/2016-02-13%2009.12.33_zpsdmncdv0k.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/2016-02-13%2013.10.55_zpslexd59bd.jpg (http://s602.photobucket.com/user/jamin00/media/Car/2016-02-13%2013.10.55_zpslexd59bd.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/2016-02-13%2013.11.00_zpsbxkvyfpj.jpg (http://s602.photobucket.com/user/jamin00/media/Car/2016-02-13%2013.11.00_zpsbxkvyfpj.jpg.html)

[diesel656]

So as a new owner of an S5 I have been digging through this thread looking at all the photos because I want to add a more custom touch to my newest car but I do have a question that I am hoping someone can help me with. I have had and still have plenty of high performance cars but I still do not get the "dropped" look, where the gap between the tire and the wheel well is asymmetrical. It looks incredibly tacky to me. I know that opinions are like rectums but is there a good reason for this other than the insignificant performance gain from a marginally lower center of gravity? I do see that several people have run with a more uniform gap which is what I am looking for but with all of the modifications I am planning on doing to this particular car any significant performance gains carry a lot of weight. Not to mention I will appreciate the performance oriented gains on every FRS I see.

[dyl0n]

SO I bought some brand new 19x9.5 HRE FF01. They were black, so I got them powder coated to RAL7015, Slate Gray. Today I went pick them up and they looked like clay in the sun. I'm really worried to throw my tires on them and risk absolutely hating them. Photoshop anyone? Save me some money?!

http://i.imgur.com/1NKh2sp.jpg
http://i.imgur.com/9DEigEb.jpg
http://i.imgur.com/S4SqJLT.jpg
http://i.imgur.com/cN62y5Q.jpg
http://i.imgur.com/saaMZoU.jpg

Here they are in the day light.. this is what scares me

http://i.imgur.com/3motl3R.jpg?1

[Sweep]

SO I bought some brand new 19x9.5 HRE FF01. They were black, so I got them powder coated to RAL7015, Slate Gray. Today I went pick them up and they looked like clay in the sun. I'm really worried to throw my tires on them and risk absolutely hating them. Photoshop anyone? Save me some money?!

http://i.imgur.com/1NKh2sp.jpg
http://i.imgur.com/9DEigEb.jpg
http://i.imgur.com/S4SqJLT.jpg
http://i.imgur.com/cN62y5Q.jpg
http://i.imgur.com/saaMZoU.jpg

Here they are in the day light.. this is what scares me

http://i.imgur.com/3motl3R.jpg?1

I'll give it a shot but I don't think they will ever look like the last shot when mounted on the car, that's only because they're facing straight up with the mid-day sun. On the car you shouldn't get direct sunlight like that.

[Gonzoe11]

Sorry no photoshop here, but the color looks great in the shade, not so good in the light. I hate to say it but I would have them refinished. Brushed matte and tinted would be my choice with your dark car.

[dyl0n]

Sorry no photoshop here, but the color looks great in the shade, not so good in the light. I hate to say it but I would have them refinished. Brushed matte and tinted would be my choice with your dark car.

Yeah that's the problem. I'm the one who picked out the color based on an Instagram post by flow form. Kept comparing the 2 side by side, and came out with that.

I'd hate to drop another $400 into making them darker. But I'm really afraid of how they'll look in the sun

[dyl0n]

I'll give it a shot but I don't think they will ever look like the last shot when mounted on the car, that's only because they're facing straight up with the mid-day sun. On the car you shouldn't get direct sunlight like that.

You are the MAN! No rush. But it'd be great to get a feel for it before I go getting them redone or mount them.

[Sweep]

You are the MAN! No rush. But it'd be great to get a feel for it before I go getting them redone or mount them.

Don't look too carefully at the brakes [>_<]
http://i.imgur.com/ZPPXZn1.jpg
http://i.imgur.com/saqe5pv.jpg

So i tried to color match the first picture since the car looks like it was photographed under some warmer light so that's just my guess, take it with a grain a salt. Maybe try jacking up your car and installing a wheel with no tire to see how it looks in the sun but under the relative shade of the wheel well?

[dyl0n]

Don't look too carefully at the brakes [>_<]
http://i.imgur.com/ZPPXZn1.jpg
http://i.imgur.com/saqe5pv.jpg

So i tried to color match the first picture since the car looks like it was photographed under some warmer light so that's just my guess, take it with a grain a salt. Maybe try jacking up your car and installing a wheel with no tire to see how it looks in the sun but under the relative shade of the wheel well?

This is exactly what I wanted to see. I may do as you said, a quick test fit.

If not, I'm going get them in a satin bronze and being done with it.

[dyl0n]

Don't look too carefully at the brakes [>_<]
http://i.imgur.com/ZPPXZn1.jpg
http://i.imgur.com/saqe5pv.jpg

So i tried to color match the first picture since the car looks like it was photographed under some warmer light so that's just my guess, take it with a grain a salt. Maybe try jacking up your car and installing a wheel with no tire to see how it looks in the sun but under the relative shade of the wheel well?

Thank you so much!!

[Sweep]

Thank you so much!!

bronze huh...[drool]
http://i.imgur.com/8xlI777.jpg
http://i.imgur.com/dMl3t2s.jpg

[dyl0n]

bronze huh...[drool]
http://i.imgur.com/8xlI777.jpg
http://i.imgur.com/dMl3t2s.jpg

Dude.. yes. The second one. Should I just pay the $400 and get them to get rid of this primer looking grey? and go bronze

[Sweep]

Dude.. yes. The second one. Should I just pay the $400 and get them to get rid of this primer looking grey? and go bronze

Personally I'm partial to bronze wheels (always have been), but you already paid to have them painted grey might as well test fit them just to be 100%. Who knows it may look pretty decent and you can run the slate grey for a little while, then when you get tired of them "refresh" them to bronze. If they really look that bad then go ahead and recoat them bronze right away

[dyl0n]

Personally I'm partial to bronze wheels (always have been), but you already paid to have them painted grey might as well test fit them just to be 100%. Who knows it may look pretty decent and you can run the slate grey for a little while, then when you get tired of them "refresh" them to bronze. If they really look that bad then go ahead and recoat them bronze right away

I did a little googling of the color code, RAL 7015 (slate grey), and I found this fella with a maxima. They just poke out so damn much as an unfinished wheel. I'd hate to spend the money on putting my tires on them, to hate them, to take the tires off, to get them painted.

http://i.imgur.com/N4k7v40.png
http://i.imgur.com/U4pZpPG.png
http://i.imgur.com/IoMdi2r.png

[Mops@Nemesis]

Man I don't think you're going to get past questioning that color. I'm not a fan at all to be honest. I say save the $100+ and time for mounting and get a color you love. It happens :/


Mops on the move

[HRE Wheels]

SO I bought some brand new 19x9.5 HRE FF01. They were black, so I got them powder coated to RAL7015, Slate Gray. Today I went pick them up and they looked like clay in the sun. I'm really worried to throw my tires on them and risk absolutely hating them. Photoshop anyone? Save me some money?!

http://i.imgur.com/1NKh2sp.jpg
http://i.imgur.com/9DEigEb.jpg
http://i.imgur.com/S4SqJLT.jpg
http://i.imgur.com/cN62y5Q.jpg
http://i.imgur.com/saaMZoU.jpg

Here they are in the day light.. this is what scares me

http://i.imgur.com/3motl3R.jpg?1

Looking real good!!!

[miked1978]

You are the MAN! No rush. But it'd be great to get a feel for it before I go getting them redone or mount them.

to each their own, but fix it now if YOU'RE not happy. I can see that color on a red S3.... I dont know if it works with the classier black 5 IMO.

[dyl0n]

Looking real good!!!

It's a great wheel and light. But the color just doesn't mesh with the black car.


to each their own, but fix it now if YOU'RE not happy. I can see that color on a red S3.... I dont know if it works with the classier black 5 IMO.


Man I don't think you're going to get past questioning that color. I'm not a fan at all to be honest. I say save the $100+ and time for mounting and get a color you love. It happens :/


Mops on the move

Well guys, dropped the wheels off today to get coated. Going with Ultra Black Chrome with the clear coat from prismatic powders. Ill have a picture in the middle of march when I get back in town!

[Mops@Nemesis]

Prismatic.... nommm. Any samples you can share?

[dyl0n]

Prismatic.... nommm. Any samples you can share?

http://uploads.tapatalk-cdn.com/20160219/3d71bd999edde87d9548fe60986e8914.jpg

That color ^ hoping for this look or similar:

http://uploads.tapatalk-cdn.com/20160219/c7793dc6ad9c69d928ae4d0968c0f1c6.jpg

[mozman68]

Ummmmm....that'll work!


Sent straight from my brain using Tapatalk

[Mops@Nemesis]

Like it!

Still enjoy that P40SC.

[dyl0n]

Ummmmm....that'll work!


Sent straight from my brain using Tapatalk

I'll have pics on here in about a month!

[jamin_00]

Vossen by night

http://i602.photobucket.com/albums/tt108/jamin00/Car/2016-02-22%2019.22.13_zpszzmmzsgu.jpg (http://s602.photobucket.com/user/jamin00/media/Car/2016-02-22%2019.22.13_zpszzmmzsgu.jpg.html)

[Ldawg32]

20x10 BBS CI-R. http://uploads.tapatalk-cdn.com/20160301/7d41297983c03ef7bb6e629621005c3a.jpghttp://uploads.tapatalk-cdn.com/20160301/4ff6c1654ba1ed436d4741e672432d4d.jpg


Sent from my iPhone using Tapatalk

[mstager]

As soon as they show up I will be posting up pics

[mstager]

is this a Rieger front bumper? If so was it hard to install? I bought one and the instructions are all in German. Lastly how did you mount that light bar? I have one mounted just below my crash bar but want to relocate it where you have yours

[mstager]

is this a Rieger front bumper? If so was it hard to install? I bought one and the instructions are all in German. Lastly how did you mount that light bar? I have one mounted just below my crash bar but want to relocate it where you have yours


New Member, so I thought I would post some photos and share my wheel specs.

- Vossen LC-105T
- 20"x10.5"
- et 30
- Full Polished (un-clear) with a Machined Diamond Cut Face
- Toyo Proxes T-1 Sport Series Tires | 255/30ZR20


https://farm2.staticflickr.com/1534/23528939134_5571837fa1_k.jpg

https://farm2.staticflickr.com/1446/24049057862_b301f691a7_k.jpg

https://farm2.staticflickr.com/1658/23789326989_2cc7fee0bb_k.jpg

https://farm2.staticflickr.com/1559/24074532511_459674f7ee_k.jpg

https://farm2.staticflickr.com/1703/24157138375_c3c6e9cb06_k.jpg

https://farm2.staticflickr.com/1691/23528937714_6a4994c549_k.jpg

[bknewtype]

is this a Rieger front bumper? If so was it hard to install? I bought one and the instructions are all in German. Lastly how did you mount that light bar? I have one mounted just below my crash bar but want to relocate it where you have yours

You can tell its a reiger by the fitment

I just got mine from reiger too. Fitment is almost perfect

Instructions arent really necessary. Pretty self explanatory


Sent from my iPhone 6s

[miked1978]

You can tell its a reiger by the fitment

I just got mine from reiger too. Fitment is almost perfect

Instructions arent really necessary. Pretty self explanatory


Sent from my iPhone 6s

how do you know if someone has a Reiger bumper? .. They'll tell you. [:D]

[bknewtype]

how do you know if someone has a Reiger bumper? .. They'll tell you. [:D]

lol

the older reiger bumpers were notorious for having horrible fitment. you can tell by the pic he posted where his bumper and fender meets. its not smooth and curvy.

im pretty lucky that mine came almost perfect. maybe after all these years, they finally revised the mold!

[hostilebynature]

Wheels came back from powdercoat...
http://i71.photobucket.com/albums/i148/methadone18T/Mobile%20Uploads/IMG_2865_zpsdirdaxmg.jpg (http://s71.photobucket.com/user/methadone18T/media/Mobile%20Uploads/IMG_2865_zpsdirdaxmg.jpg.html)

[Boden AutoHaus]

20" Rotiform SPF -

https://farm2.staticflickr.com/1581/24489481373_225b5a7cb2_c.jpg

[osugsxr]

Looking at purchasing 20" mrr hr6 20x9 25 offset for a 2013 a5, will these wheels work okay ? If so recommend tire size thanks. Don't want wheels sticking out from fender . Flush or in

[hostilebynature]

I run 275/30's on 20x10.5 ET 30 on my A5 with no issues. I imagine a 265 or 275 would work just fine.

[osugsxr]

I run 275/30's on 20x10.5 ET 30 on my A5 with no issues. I imagine a 265 or 275 would work just fine.


no issues up front turing?

[auditink]

no issues up front turing?

You would be surprised how much tire can fit under these fenders . I was very skeptical as well, but I ran a 285/30 on a 20x11 et28 and didn't have any problems turning.

[osugsxr]

Okay thanks , so I should have no issues with these being 20x9 25 offset . No rubbing , brake clearance okay ? Would these sit in like stock or flush with fender ?

[FourZeroSe7en]

Okay thanks , so I should have no issues with these being 20x9 25 offset . No rubbing , brake clearance okay ? Would these sit in like stock or flush with fender ?

I'm running 20x10 et25 all around.. lowered on H&R OE Sport.. no rubbing issues or clearance issues.. however they do sit almost like stock when it comes to offset.. I need to get 8-10mm spacers for sure.

[osugsxr]

I'm running 20x10 et25 all around.. lowered on H&R OE Sport.. no rubbing issues or clearance issues.. however they do sit almost like stock when it comes to offset.. I need to get 8-10mm spacers for sure.

Thanks, ones I was looking sold

would the following work?

TSW gatsby wheels 20x10, 5x112 et40

Would like to avoid using spacers, and not looking to lower the car at this time.

[nob]

Is anyone runing a 265 or a 275 on a 9.5x20 and has a picture of it ?

[Mops@Nemesis]

Is anyone runing a 265 or a 275 on a 9.5x20 and has a picture of it ?

The CKs... 20x9.5 on 275...

https://www.flickr.com/photos/91999203@N06/page15

[qddoan]

Please help, I want to upgrade my stock A5 sportback with 20x10 all around. Will there b any problem if the offset is 35?

[flyeyes]

I still plan to lower my car, but figured I would still put my wheels on. Also kinda contemplating some sort of mild accents so the car & wheels don't look totally murdered out. Just not sure what would be a complimenting item for the car other than S5 mirrors, or..... something, ....I guess I have some work cut out for me, other than a lowering job[wrench] Also going to "try" 5mm wheel spacers for the rear wheels.... Pardon the dirt, haven't had a chance to wash my car with all the rain lately. (The tires still have dried soap on them from mounting them on the wheels. Driving me crazy that the rain hasn't washed some away.)

Wheels: XO Wheels
Size: 19x10
Tires: 255/35/19ZR
No idea what the offset is...sorry.

http://carphotos.cardomain.com/images/0019/95/10/19145901.jpg
http://carphotos.cardomain.com/images/0019/85/49/19145894.jpg
http://carphotos.cardomain.com/images/0019/85/09/19145890.jpg
http://carphotos.cardomain.com/images/0019/95/90/19145909.jpg

[osugsxr]

wheels pretty much trying to choose from the following used sets

$649 rotor replicas
20x9 et 35

$700 mrr hr6
20x9 et 25

$675 avant m310 staggered
20x10 et 33
20x10 et 25

Tire size would be 265/30/20 seems like it would be a good fit.

[dyl0n]

19x9.5 HRE FF01
ET45
8mm spacers front 10mm rear

http://i.imgur.com/BT9UfVM.jpg
http://i.imgur.com/3KKwFNO.jpg
http://i.imgur.com/jaBTfXh.jpg
http://i.imgur.com/i52i6bu.jpg

[dnchattan]

AG M580 - Polished brushed grigio - 20x10 et25
Michelin PSS 275/30

The finish on the wheels has a nice shine to it that doesn't come out as well in pictures-- they look absolutely stunning in person [:)]

http://i76.photobucket.com/albums/j29/dnchattan/20160330_205757780_iOS_zpsz72chlbf.jpg (http://s76.photobucket.com/user/dnchattan/media/20160330_205757780_iOS_zpsz72chlbf.jpg.html)http://i76.photobucket.com/albums/j29/dnchattan/20160330_222012682_iOS_zpsp4igejb1.jpg (http://s76.photobucket.com/user/dnchattan/media/20160330_222012682_iOS_zpsp4igejb1.jpg.html)http://i76.photobucket.com/albums/j29/dnchattan/20160330_205823032_iOS_zpscjyctl7s.jpg (http://s76.photobucket.com/user/dnchattan/media/20160330_205823032_iOS_zpscjyctl7s.jpg.html)

[CR3_]

Niche Targa
20x10.5
Powder Coated Bronze
5x112

Actually going to sell them so if anyone is interested PM me! $1,350.00 I will ship at buyers cost!

http://s1262.photobucket.com/user/ramirez_cruz33/media/IMG_7659_zps9mkp1shc.jpg.html

http://s1262.photobucket.com/user/ramirez_cruz33/media/IMG_7657_zpstgwyrctg.jpg.html

http://s1262.photobucket.com/user/ramirez_cruz33/media/IMG_7658_zpsowtcokvk.jpg.html

[emsii]

Just got my car out of the garage (after winter) with new wheels installed.

http://funccrew.kuvat.fi/kuvat/Kalusto/Eeron+A5/20160407_195209.jpg/small

Custom made Work Zeast ST2's (Imperial gold centers and polished lips)
Front: Middle concave 20x10,5" with 255/30
Back: Deep concave 20x11,5" with 295/25

[miked1978]

now thats different...

[audimaster12]

Just got my car out of the garage (after winter) with new wheels installed.

http://funccrew.kuvat.fi/kuvat/Kalusto/Eeron+A5/20160407_195209.jpg/small

Custom made Work Zeast ST2's (Imperial gold centers and polished lips)
Front: Middle concave 20x10,5" with 255/30
Back: Deep concave 20x11,5" with 295/25
Loud and proud

[Sweep]

Just got my car out of the garage (after winter) with new wheels installed.

http://funccrew.kuvat.fi/kuvat/Kalusto/Eeron+A5/20160407_195209.jpg/small

Custom made Work Zeast ST2's (Imperial gold centers and polished lips)
Front: Middle concave 20x10,5" with 255/30
Back: Deep concave 20x11,5" with 295/25
I like it! Different is good

Sent from my XT1575 using Tapatalk

[dux ducis]

Didn't want it to come to this but it has.....need ideas for wheels. I'm really at a point where I'm just not sure and I would like some fresh ideas. I have a unique car color that doesn't really mesh with any other color besides black, but I really want a loud/unique color lol. Thanks!

What brand/style/color wheels should I get for my car? Open to anything at this point.

http://uploads.tapatalk-cdn.com/20160416/c54a6a3d13fcc99b321f9153e8e436fc.jpghttp://uploads.tapatalk-cdn.com/20160416/6efabb2dced35defdce169f974094398.jpghttp://uploads.tapatalk-cdn.com/20160416/5623e695d13eab0d06a5f539d5da7a50.jpghttp://uploads.tapatalk-cdn.com/20160416/e336b04fb16d0006f9dca397d4e9e330.jpg


Sent from nowhere.

[auditink]

you have to decide on a wheel style you like because its your car, but I vote blue for your color, so i'll leave this here as I think this would look cool on your car, if you want loud.

http://www.jhpusa.com/store/pc/catalog/volk/volk.te37sl-mb_d.jpg

[Mops@Nemesis]

This so much. A bit loud, but still plays nice with your colors.

http://www.dsgperformance.com/assets/images/Products/Volk/volk%20te37%20ultra%20wheel%20universal%20dsg%20pe rformance%202.jpg

[Sweep]

https://europeanautosource.com/media/catalog/product/cache/4/thumbnail/9df78eab33525d08d6e5fb8d27136e95/v/o/volk_-_te37sl_black_edition_09.jpg

Or you can stick with black and go loud on the accents

Sent from my XT1575 using Tapatalk

[dux ducis]

Thank you for the responses. I like the colors/accents on all of those lol. That midnight blue and gold were actually colors that I was considering too as well as a dark red.....but is there a reason you guys are all showing me Volks? lol

And Mops sorry, I know we've been back and forth over this for about several months now lol. I have money, I just don't want buyer's remorse. I still am strongly considering the Niche Invert 3pc or their cast...or I guess now Vossen's new VFS6.

blah

[Sweep]

Not in particular, but you never mentioned a wheel style preference so I think we all just piggy backed on the first suggestion. I do kinda like volks because they stand out from the usual AG, BBS, Vorsteiner, and Vossen that everyone seems to run on the 5s

Sent from my XT1575 using Tapatalk

[dux ducis]

Is the T37 even available in 20"? I used to own an IS 250 and people loved them because they were 18" and they could drop pretty low on them.

[Mops@Nemesis]

Is the T37 even available in 20"? I used to own an IS 250 and people loved them because they were 18" and they could drop pretty low on them.

The Ultra posted above come in 20x10. Here are the ones I ran...

https://farm9.staticflickr.com/8882/18181768841_f0edf57699_k.jpg (https://flic.kr/p/tGEjr8)MopsTE37-3751 (https://flic.kr/p/tGEjr8) by Audiyos (https://www.flickr.com/photos/91999203@N06/), on Flickr

In the US currently, the exact set and the same in matte blue gunmetal are available.

[Rshane]

This so much. A bit loud, but still plays nice with your colors.

http://www.dsgperformance.com/assets/images/Products/Volk/volk%20te37%20ultra%20wheel%20universal%20dsg%20pe rformance%202.jpg

Hey, I kind of like these, would go well with Daytona grey too. The TE 37's are big with the M3 crowd...almost bought them for my M3. I ended up getting Forgestar's in Bronze Burst. I was looking to get some BBS CI-Rs and have them powder coated Bronze Burst Metallic, but I need to think on this now.

http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zps20c0f275.jpg

http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zps4603e97a.jpg

[JamesRS5]

Didn't want it to come to this but it has.....need ideas for wheels. I'm really at a point where I'm just not sure and I would like some fresh ideas. I have a unique car color that doesn't really mesh with any other color besides black, but I really want a loud/unique color lol. Thanks!

What brand/style/color wheels should I get for my car? Open to anything at this point.

http://uploads.tapatalk-cdn.com/20160416/c54a6a3d13fcc99b321f9153e8e436fc.jpghttp://uploads.tapatalk-cdn.com/20160416/6efabb2dced35defdce169f974094398.jpghttp://uploads.tapatalk-cdn.com/20160416/5623e695d13eab0d06a5f539d5da7a50.jpghttp://uploads.tapatalk-cdn.com/20160416/e336b04fb16d0006f9dca397d4e9e330.jpg


Sent from nowhere.

Black wheels just get lost on your color car, you don't see the wheels at all, you need something that pops out but I just can't see gray and gold going together. I think a red would look pretty cool and stand out.

Check out this deep red color.

http://www.vossenwheels.com/gallery/WheelDetails.aspx?id=2161

Or a satin bronze

http://www.vossenwheels.com/gallery/WheelDetails.aspx?id=2182

[Rshane]

Didn't want it to come to this but it has.....need ideas for wheels. I'm really at a point where I'm just not sure and I would like some fresh ideas. I have a unique car color that doesn't really mesh with any other color besides black, but I really want a loud/unique color lol. Thanks!

What brand/style/color wheels should I get for my car? Open to anything at this point.

http://uploads.tapatalk-cdn.com/20160416/c54a6a3d13fcc99b321f9153e8e436fc.jpghttp://uploads.tapatalk-cdn.com/20160416/6efabb2dced35defdce169f974094398.jpghttp://uploads.tapatalk-cdn.com/20160416/5623e695d13eab0d06a5f539d5da7a50.jpghttp://uploads.tapatalk-cdn.com/20160416/e336b04fb16d0006f9dca397d4e9e330.jpg


Sent from nowhere.

What about this color...really pops? http://www.hrewheels.com/gallery/audi-rs5-with-hre-p44sc-in-brushed-copper


http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zpsxrhgmif1.jpeg

[auditink]

I still like the blue wheels for your color. Here is a m3 in fashion grey with blue wheels to give you an idea of what the color combo would look like
http://f80.bimmerpost.com/forums/attachment.php?attachmentid=1215042&d=1432532286

http://f80.bimmerpost.com/forums/attachment.php?attachmentid=1215043&d=1432532286

same fashion grey m3 but with copper
http://f80.bimmerpost.com/forums/attachment.php?attachmentid=1215044&d=1432532286

[DreDay]

http://uploads.tapatalk-cdn.com/20160417/30ed76cccb21da6cbfa9165f253c93e7.jpg
http://uploads.tapatalk-cdn.com/20160417/9542951ea93409c5a32d38569fb98186.jpg
Hey all, I don't think I've shared my wheel and tire spec in this thread before. I know these aren't uncommon specs but maybe the tire fitment isn't that common. Just in case it might help someone with fitment on their V8 S5!

Specs below but here too:

Tires: NITTO INVO 285/30/20
Suspension: H&R OE SPRINGS
WHEELS: VOSEEN CV5 20x10.5 ET30
Spacers: ECS TUNING 5mm in the rear


Sent from my iPhone using Tapatalk

[changareth]

http://uploads.tapatalk-cdn.com/20160418/c93f3025ccf19b0213ba9eead12bcade.jpg

http://uploads.tapatalk-cdn.com/20160418/ca0559e37e025b84deed8c968ff64715.jpg

ADV10 MV.2 20" with Michelin PSS 275/30 ZR20 on H&R lowering springs.

[i1overice]

http://uploads.tapatalk-cdn.com/20160418/c93f3025ccf19b0213ba9eead12bcade.jpg

http://uploads.tapatalk-cdn.com/20160418/ca0559e37e025b84deed8c968ff64715.jpg

ADV10 MV.2 20" with Michelin PSS 275/30 ZR20 on H&R lowering springs.

Get out of here with that sexy sportback and ecodes junk..

God damn that looks good! +1 HK pride.

[audimaster12]

http://uploads.tapatalk-cdn.com/20160418/c93f3025ccf19b0213ba9eead12bcade.jpg

http://uploads.tapatalk-cdn.com/20160418/ca0559e37e025b84deed8c968ff64715.jpg

ADV10 MV.2 20" with Michelin PSS 275/30 ZR20 on H&R lowering springs.

Where did you get those Michelin PS? I cant find them anywhere in that size.....

[changareth]

Where did you get those Michelin PS? I cant find them anywhere in that size.....

I got them from a dealer here I could maybe try and help you ask.


Sent from my iPhone using Audizine mobile app

[changareth]

Get out of here with that sexy sportback and ecodes junk..

God damn that looks good! +1 HK pride.

hahaha thanks :p


Sent from my iPhone using Audizine mobile app

[audimaster12]

I got them from a dealer here I could maybe try and help you ask.




Sent from my iPhone using Audizine mobile app

That would be excellent.

[osugsxr]

Im considering the following on my 13 a5
20x10.5 et 27
285/30/30
stock suspension would probably do lowering springs eventually

Input on possible rubbing issues, at stock height & hr oe springs?

[flatsick]

Get out of here with that sexy sportback and ecodes junk..

God damn that looks good! +1 HK pride.

+ 1 dafuq outta here[mad]

[MerakiAutoworks]

http://i66.tinypic.com/mc52wy.jpg

Installed Vorsteiner VFF-102 Carbon Graphite Wheels.

20x10 all around.. ;)

-Josh

[Sauci]

Currently I have the 19" stock y-spokes with 15/20mm spacers F/R but planning on buying some m550s 20x10 et25. Will these sit flush? Or will I need to buy new spacers?

[astonmartin007]

[QUOTE=DreDay;11559037]http://uploads.tapatalk-cdn.com/20160417/30ed76cccb21da6cbfa9165f253c93e7.jpg
http://uploads.tapatalk-cdn.com/20160417/9542951ea93409c5a32d38569fb98186.jpg


Looks unbelievable!!!!!!!!!!!!!
Great job [up]

[astonmartin007]

http://i66.tinypic.com/mc52wy.jpg

Installed Vorsteiner VFF-102 Carbon Graphite Wheels.

20x10 all around.. ;)

-Josh

Nice looking ! Love the color of the wheels with your car.
The red on center caps fits perfectly with the Red on S badge

[DreDay]

@astonmartin007 thanks man! I appreciate that! I made a lot of mistakes getting the car to this point haha I finally like how it looks!


Sent from my iPhone using Tapatalk

[astonmartin007]

@astonmartin007 thanks man! I appreciate that! I made a lot of mistakes getting the car to this point haha I finally like how it looks!


Sent from my iPhone using Tapatalk

I first thought the color of your car was Daytona. Meteor with Black optic package looks wicked!
You should definitely post more pictures :)

[MerakiAutoworks]

Nice looking ! Love the color of the wheels with your car.
The red on center caps fits perfectly with the Red on S badge

Thank you sir! :)

-Josh

[DreDay]

@astonmartin007 yes depending on the angle (and editing haha) it's grey or green hah and not black optic, but I blacked everything so haha I'll have more pics from SoWo!


Sent from my iPhone using Tapatalk

[Marc Idon NoYu]

Vossen CV7 wheels

20x10.5 ET30
275/30/20

https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/13094137_10153536820534149_7215736180893049578_n.j pg?oh=4076eaa4986dbca39d5a842021d2e58e&oe=57D61FA9
https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/12994524_10153482501259149_8035849529419955365_n.j pg?oh=835d2d0c79dca29dd9be8bbdff01f681&oe=57CF2523
https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/12974387_10153482497654149_714048211660445571_n.jp g?oh=5dc4915a29baa61d080779c663656460&oe=57D0C12A

[Okan509]

^ what bumper is that?

If I had to guess it is the pre facelift competition package?

[Mops@Nemesis]

^ what bumper is that?

If I had to guess it is the pre facelift competition package?

A5 and Q3 ones made into one custom cover. Pretty badass!


Mops on the move

[Okan509]

A5 and Q3 ones made into one custom cover. Pretty badass!


Mops on the move

Nice! it looks fantastic

[Marc Idon NoYu]

A5 and Q3 ones made into one custom cover. Pretty badass!


Mops on the move

Yeh as above. 2 bumpers joined together, similar to rs5 but was cheaper. was my way of making front end look bit newer. s'line bumper was mess off stone chips

[rumbo11]

hi,please help,car S5 20' 10J what will be the best ET?

[Rshane]

AG M580 20 X 10 ET 15. 275/30/20

http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zpsin0pkbsc.jpeg

http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zpsmm1otqab.jpeg

http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zpsvme9a9ma.jpeg

http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zpsqsw4bgvb.jpeg

http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zpseaifiv1k.jpeg

Front:

http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zpsyhbzooce.jpeg


http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zpsbs3lyffu.jpeg



Rear:

http://i1182.photobucket.com/albums/x455/Rshanep/Snapbucket/image_zps3zxewf4k.jpeg

[ip428]

Just got my car out of the garage (after winter) with new wheels installed.

http://funccrew.kuvat.fi/kuvat/Kalusto/Eeron+A5/20160407_195209.jpg/small

Custom made Work Zeast ST2's (Imperial gold centers and polished lips)
Front: Middle concave 20x10,5" with 255/30
Back: Deep concave 20x11,5" with 295/25

Very dope. What offsets are you running all around?

[ip428]

This so much. A bit loud, but still plays nice with your colors.

http://www.dsgperformance.com/assets/images/Products/Volk/volk%20te37%20ultra%20wheel%20universal%20dsg%20pe rformance%202.jpg

Mops, you carry those TE37's?

[Avantmaniac]

Thoughts on if I put 285/30/20 instead of 275/30/20? wheels are 20x10.5.

http://i78.photobucket.com/albums/j100/iKelisiousz/2016-06-03%2016.59.54.jpg (http://s78.photobucket.com/user/iKelisiousz/media/2016-06-03%2016.59.54.jpg.html)

[JamesRS5]

I'm about to install 295/25/21 on 10.5 but I prefer the fuller tire look, I've never been a fan of the stretched look.

[V8Star]

KlassenID R70 20x10.5 wrapped in 275/30/20 Toyo T1Rs

https://imagizer.imageshack.us/v2/794x529q90/922/sl5bip.jpg

[DreDay]

@V8Star wow!! Sick! I'm tucking 285/30 but might make the move to 275/30, looks nice!


Sent from my iPhone using Tapatalk

[rumbo11]

20' 10J 255/35/20
http://images77.fotosik.pl/709/a16799ba339d30d2.png (http://www.fotosik.pl/zdjecie/a16799ba339d30d2)

[Marc Idon NoYu]

20x10.5 - 275/30

JUDD T204 - UK rep of Vossen CV7's (Not easy to get in the UK)

https://scontent-lhr3-1.xx.fbcdn.net/t31.0-8/s960x960/13582184_10153658498369149_6529818811677318339_o.j pg
https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/13592634_10153655951969149_8551106822756725667_n.j pg?oh=7eaf754730f305589da4e44e8f423bfd&oe=57F08E29

photoshops of colours i like

https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/13592560_10153663781919149_1330304566882210469_n.j pg?oh=a276a6597b6f39e11ac2a657c8958f55&oe=57EB8C8B
https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/13620121_10153663782069149_7954860758148892243_n.j pg?oh=18872de7ee6483998d5ffdd5ceadb454&oe=57F424E4

[avimore]

http://uploads.tapatalk-cdn.com/20160418/c93f3025ccf19b0213ba9eead12bcade.jpg

http://uploads.tapatalk-cdn.com/20160418/ca0559e37e025b84deed8c968ff64715.jpg

ADV10 MV.2 20" with Michelin PSS 275/30 ZR20 on H&R lowering springs.


Looks great! May I ask where you purchased your front bumper from?

[importfanatic17]

http://i44.photobucket.com/albums/f41/importfanatic17/Mobile%20Uploads/20160702_110908.jpg

[miked1978]

looks like its going on a super duty with all those lug holes.

[Sofreshs5]

oops

[DreDay]

I never posted these on this thread but figured I would share.

Bbs CI-R 20x10 ET25
255/30 Hankook Ventus V12
Airlift suspension

Some things to note that may help:
Previous tire 275/30 NITTO Invo looked nicer, but didn't tuck in the rear. I think 265/30 would have tucked but didn't risk. Plus 265 are far and few in between.

I ran the 275/30 on this wheel on H&R OE SPRINGS prior and it was pretty flush with no issues.

http://uploads.tapatalk-cdn.com/20160802/97939b4ecfd7ac9419695db1d6f16b29.jpg
http://uploads.tapatalk-cdn.com/20160802/bdeac0c7cde760805ef6c99889ea1aec.png


Sent from my iPhone using Tapatalk

[grizzlyone]

BBS CHR-2's:

F- 20x10.5 w/255.30.20
R- 20x11.5 w/275.30.20

On H&R Ultra low coils

https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/13754655_10209647128205426_5872464764917230148_n.j pg?oh=9845afafd4efd4f6020ad12a8001e614&oe=5812A058

[ModdedEuros]

BBS CHR-2's:

F- 20x10.5 w/255.30.20
R- 20x11.5 w/275.30.20

On H&R Ultra low coils

https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/13754655_10209647128205426_5872464764917230148_n.j pg?oh=9845afafd4efd4f6020ad12a8001e614&oe=5812A058

looking good [up]

[PLAYRZ]

^^ Any more pics of this? ^^

[jamin_00]

Ferrada FR3 with custom paint.

20 x 10.5 all round running 285/30/20 Michelin PSS still

KW DDC ECU suspension.


http://i602.photobucket.com/albums/tt108/jamin00/Car/IMG_3488_zpsvr2dldvn.jpg (http://s602.photobucket.com/user/jamin00/media/Car/IMG_3488_zpsvr2dldvn.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/IMG_3482_zpsjbkg0npw.jpg (http://s602.photobucket.com/user/jamin00/media/Car/IMG_3482_zpsjbkg0npw.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/IMG_3492_zpssoms2j5y.jpg (http://s602.photobucket.com/user/jamin00/media/Car/IMG_3492_zpssoms2j5y.jpg.html)

[grizzlyone]

^^ Any more pics of this? ^^

https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/13920842_10209722851618464_5603050991171705072_n.j pg?oh=5fe32e85518ad6dda8cc95da8a63e081&oe=581E9956

https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/13886306_10209722852378483_8361336268303756723_n.j pg?oh=d64b9ec61f769b64c75110b0c948b3d9&oe=5819D87C

https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/13876203_10209722861058700_7420880952566123815_n.j pg?oh=a24145d88ebebf64d9f228eecbf73bfb&oe=58264E2D

[importfanatic17]

Wheels: 19x9.5" Volk CE28N
Tires: 265/35/19 Hankook Ventus V12 Evo II

http://i44.photobucket.com/albums/f41/importfanatic17/Mobile%20Uploads/20160804_135434.jpg

[Marc Idon NoYu]

JUDD T204 - replica of vossen cv7. its a UK available wheel

https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/13882676_10153734379269149_7636481416132183922_n.j pg?oh=60b3edc9d2aa7f5504fb038984df34e1&oe=5826F58E

[tropik]

Best spacers for A5 with OEM RS4 style wheels 20x9 ET29, 265/30 & with 25mm lowering springs? 10mm front, 15mm back? Any shop for good spacers 5x112, 66.6 center?

https://scontent-waw1-1.xx.fbcdn.net/t31.0-8/13653352_10205267682526623_3542673856654339766_o.j pg

[snafu]

I've seen a few people post the ferrada FR1s, what offset are you all running, and are you running spacers with the 10.5s? Thanks!

- - - Updated - - -

whoops, meant Fr3s!

[Mean Machine]

Ferrada FR3 with custom paint.

20 x 10.5 all round running 285/30/20 Michelin PSS still

KW DDC ECU suspension.


http://i602.photobucket.com/albums/tt108/jamin00/Car/IMG_3488_zpsvr2dldvn.jpg (http://s602.photobucket.com/user/jamin00/media/Car/IMG_3488_zpsvr2dldvn.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/IMG_3482_zpsjbkg0npw.jpg (http://s602.photobucket.com/user/jamin00/media/Car/IMG_3482_zpsjbkg0npw.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/IMG_3492_zpssoms2j5y.jpg (http://s602.photobucket.com/user/jamin00/media/Car/IMG_3492_zpssoms2j5y.jpg.html)

Jamin - your wheels came out good. Do you know if it was difficult to paint the outer lip? I've been thinking about painting mine too and because they're one piece i'm just not sure how they would come out.

[Benzo1133]

Those wheels are bought in that finish. Ferrada has 3 finishes to their whole line. Black/gold, full black, & brushed aluminium/polished lip

[a4magnet]

I have a Audi A5 B8 Coupé with 20x9 ET35 on 265/30 tires.
Does anyone know what spacer size I need to move closer to the fender?

Does anyone have some good pics with 20x9 near the fenders?

[kappax12]

Any recommendation for what Spacer size for flush look for 20x10s et30 wrapped with 275/30r20?

14' s5

[AwedeeS5]

Vorsteiner VFF-104's wrapped in 275/30/20 PZeros
H&R coils

http://uploads.tapatalk-cdn.com/20160904/f8b65bf1f4da0859892fbbcef0df9884.jpg

[Meadowdale]

I am looking for some help with fitting winter wheels.

I happen to have a set of 18" O.Z. Canova wheels from another vehicle (non-Audi). By default I am thinking to sell my winter set and find something for the Audi.
The wheel: http://www.ityre.com/en/disks/catalog/oz/4854/
However, I started wondering if those wheels actually could fit?

What I know about the wheel:
18x8
40 offset
79/67 hub adapter

8" is narrower than my 19" summers. Sufficient for winter?
Probably too much offset?
I imagine the hub adapter could be replaced?

[mozman68]

I am looking for some help with fitting winter wheels.

I happen to have a set of 18" O.Z. Canova wheels from another vehicle (non-Audi). By default I am thinking to sell my winter set and find something for the Audi.
The wheel: http://www.ityre.com/en/disks/catalog/oz/4854/
However, I started wondering if those wheels actually could fit?

What I know about the wheel:
18x8
40 offset
79/67 hub adapter

8" is narrower than my 19" summers. Sufficient for winter?
Probably too much offset?
I imagine the hub adapter could be replaced?

Run the winters on the stock 19's and buy 20's for summer instead...

[Mops@Nemesis]

Vorsteiner VFF-104's wrapped in 275/30/20 PZeros
H&R coils

Looks great!

[Meadowdale]

Run the winters on the stock 19's and buy 20's for summer instead...
Had some bad experiences with potholes in the Chicago area. Prefer the extra rubber with 18". Also might be better for car washes in the winter.
Turns out I can't use my old wheels due to different wheel PCD. So, I will be on the hunt for a used or new set.

[Sportunage]

I prefer a squared set up but I came across a deal that I couldn't turn down. Found a set wheels for a steal in 20x8.5 et35 front, and 20x10 et35 rear. I'm relatively new to the Audi scene, and new to the forum as well. I've been through every page of this wheel forum tryng to find a common set up. Seems like the target et on 20x10's is somewhere around 25 which would mean I would need a 10mm spacer for the rear. With the narrower fronts what would you suggest for a more flush fitment. I'll be running H&R sport springs purchased from a member here. Possible SPC upper control arms as well (If that matters at all). Haven't figured out how to post pics yet. I have a couple in my phone of the wheels but couldn't get them to upload. Also will be running 275/30/20 in the rear, and 255/30/20 for the fronts.

[Sportunage]

Here's a pic....
http://www.audizine.com/gallery/data/500/medium/IMAG0268.jpg (http://www.audizine.com/gallery/showphoto.php?photo=85531&title=imag0268&cat=500)

[JamesRS5]

Oh hello, these look familiar:

http://www.vossenwheels.com/gallery/WheelDetails.aspx?id=2885

[11th]

Thank you to Jason @ Get Your Wheels! Fitment is PERFECT!
AG M580 in Satin Silver 20X10 et25 275/30/20 all around
On ST Suspensions coilovers. Waiting for them to settle so i can moar low!
https://c3.staticflickr.com/9/8377/29285158050_c901c1414d_z.jpg (https://flic.kr/p/LBQ6d7)Photo Sep 09, 8 06 34 PM (https://flic.kr/p/LBQ6d7) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
https://c3.staticflickr.com/9/8447/29541134866_f6d7774c56_k.jpg (https://flic.kr/p/M1s3cu)Photo Sep 09, 7 57 50 PM (https://flic.kr/p/M1s3cu) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr

Hi-res shots coming tomorrow!

[Sportunage]

Thank you to Jason @ Get Your Wheels! Fitment is PERFECT!
AG M580 in Satin Silver 20X10 et25 275/30/20 all around
On ST Suspensions coilovers. Waiting for them to settle so i can moar low!
https://c3.staticflickr.com/9/8377/29285158050_c901c1414d_z.jpg (https://flic.kr/p/LBQ6d7)Photo Sep 09, 8 06 34 PM (https://flic.kr/p/LBQ6d7) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
https://c3.staticflickr.com/9/8447/29541134866_f6d7774c56_k.jpg (https://flic.kr/p/M1s3cu)Photo Sep 09, 7 57 50 PM (https://flic.kr/p/M1s3cu) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
https://c1.staticflickr.com/9/8487/29285159040_2094f9288e_k.jpg (https://flic.kr/p/LBQ6vb)Photo Sep 09, 6 02 01 PM (https://flic.kr/p/LBQ6vb) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
Hi-res shots coming tomorrow!
Man... Those fit perfectly. I even like the height it's at.

[11th]

took some quick shots today at sunset
https://c6.staticflickr.com/9/8490/29021179733_7a21328ccb_b.jpg (https://flic.kr/p/Ldv8DP)IMG_0247 (https://flic.kr/p/Ldv8DP) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
https://c5.staticflickr.com/9/8386/29534670052_011544876f_b.jpg (https://flic.kr/p/LZSUrb)IMG_0230 (https://flic.kr/p/LZSUrb) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
https://c6.staticflickr.com/9/8216/29645490525_6e9c26392d_b.jpg (https://flic.kr/p/MaETuZ)IMG_0226 (https://flic.kr/p/MaETuZ) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
https://c4.staticflickr.com/9/8059/29645490515_6111879e16_b.jpg (https://flic.kr/p/MaETuP)IMG_0223 (https://flic.kr/p/MaETuP) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
https://c2.staticflickr.com/9/8524/29645490505_bf0fe0b744_b.jpg (https://flic.kr/p/MaETuD)IMG_0217 (https://flic.kr/p/MaETuD) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
https://c4.staticflickr.com/9/8582/29645490475_ea32cbc138_b.jpg (https://flic.kr/p/MaETu8)IMG_0211 (https://flic.kr/p/MaETu8) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr
https://c8.staticflickr.com/9/8387/29645490415_865e650fae_b.jpg (https://flic.kr/p/MaETt6)IMG_0173 (https://flic.kr/p/MaETt6) by Khaled Abukharma (https://www.flickr.com/photos/11th_commandment/), on Flickr

[Mops@Nemesis]

Excellent pics! You cannot go wrong with the 580.

[BuffDavid]

Excellent pics! You cannot go wrong with the 580.

I'm now torn between the M510 and the M580
They both look gorgeous!

[DVision]

Sweet pics 11th! Well done! Car looks great...

[11th]

Excellent pics! You cannot go wrong with the 580.
thanks mops! i love them

I'm now torn between the M510 and the M580
They both look gorgeous!
tough one. flip a coin!

[BuffDavid]

tough one. flip a coin!
I just saw a Mongoose Gray S5 with the M590s...and my decision got even harder....idk what I'll end up doing now...

[Mops@Nemesis]

I just saw a Mongoose Gray S5 with the M590s...and my decision got even harder....idk what I'll end up doing now...

One of each the 510, 550, 580 and 590. Trendsetter!

[BuffDavid]

One of each the 510, 550, 580 and 590. Trendsetter!

Hahahaha!
#trendsetter #2016 #donotjudgeme
I'll make up my mind by the end of this month.
I'm almost home =)

[Djsteelo]

I am new to Audi coming from Mercedes. I want to go with squared setup of RC10 20x10 because I really like the concave look. Rohana is showing offsets available in 33mm and 18mm. Clearly the 18mm will give me the deepest concave but will the wheels poke beyond my fenders. I know guys on here with this particular wheel have ran 20x11 ET28.
I will also be lowering the car on coilovers after mounting wheels.


Sent from my iPad using Audizine (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=87676)

[Marc Idon NoYu]

20x10.5 ET30 275/30

https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/13007355_10153482499489149_7155109332075646796_n.j pg?oh=f9a68ed6d93a762c1e9d8b63165df54f&oe=58796610
https://scontent-lhr3-1.xx.fbcdn.net/v/t1.0-9/13879328_10153736823384149_5805145620559833139_n.j pg?oh=260db50d572848e76a89a7b915143762&oe=587C2898

[PLAYRZ]

BC Forged HCS02S - Brushed Black Tint
20x10 +25 offset
Nitto INVO 275/30/20

https://c5.staticflickr.com/6/5222/29778823492_16dbfdd770_o.jpg (https://flic.kr/p/MnsfKf)

[wxsgt]

AG M580 - Polished brushed grigio - 20x10 et25
Michelin PSS 275/30

The finish on the wheels has a nice shine to it that doesn't come out as well in pictures-- they look absolutely stunning in person [:)]

http://i76.photobucket.com/albums/j29/dnchattan/20160330_205757780_iOS_zpsz72chlbf.jpg (http://s76.photobucket.com/user/dnchattan/media/20160330_205757780_iOS_zpsz72chlbf.jpg.html)

I know where that shop is! lol i live down the road and use them for everything i can. Side note, what is a good staggered 19 in fitment, or does the et vary widely because of setup(concavity and such) never done wheels before, but am thinking about getting something beefy for the rear end especially once JHM comes out with their high bias diff lol

[SelvaEng]

2011 S4
Wheels: Avant Garde M368 19x9.5 et20 No Spacers.
Tires : 255 35R19

The first photo is the stock car as I bought it.

http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160729_092808_zpsucfvhtr4.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160729_092808_zpsucfvhtr4.jpg.html)

Next photos are after installing the H&R Sport Springs and Wheels.

http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160804_194951_zpsontqpxqz.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160804_194951_zpsontqpxqz.jpg.html)


http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160804_170909_zpsbx5twlx8.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160804_170909_zpsbx5twlx8.jpg.html)


http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160804_170919_zpsblw7ky7m.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160804_170919_zpsblw7ky7m.jpg.html)


http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160804_170930_zpsxue86gnh.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160804_170930_zpsxue86gnh.jpg.html)

[EddieB]

I need some advise people. I'm running 20x9 Stasis SE12 ET48 wheels with 255/35/20 tires all around on H&R OE Sport springs on my 2011 A5 S-Line.

I'm having trouble figuring out what size spacers I need in the front and back. thoughts and pics will be nice.

thanks in advance! [:)]

[Sweep]

I need some advise people. I'm running 20x9 Stasis SE12 ET48 wheels with 255/35/20 tires all around on H&R OE Sport springs on my 2011 A5 S-Line.

I'm having trouble figuring out what size spacers I need in the front and back. thoughts and pics will be nice.

thanks in advance! [:)]
Sounds like you may have bought A4/S4 wheels. Someone should double check me but I think you would need something like 35mm

Sent from my XT1575 using Tapatalk

[Mops@Nemesis]

Are you sure ET48 is correct? First, I'd want 275 rubber. Either way, that is super weak if correct. You'll want to max out and go 25mm front and 30mm rear, and hope you're pleased.

[Sweep]

https://c3.staticflickr.com/9/8661/30321053522_2f9341b5a2_h.jpg (https://flic.kr/p/NcnjQS)DSC09050.jpg (https://flic.kr/p/NcnjQS) by kthung (https://www.flickr.com/photos/k_hung/), on Flickr

Ground Force GF06
20x10.5 ET30
Hankook Ventus Evo2
275/30/20

Sent from my XT1575 using Tapatalk

[EddieB]

Sounds like you may have bought A4/S4 wheels. Someone should double check me but I think you would need something like 35mm

Sent from my XT1575 using Tapatalk

Sweep - you're right, they're actually A4/S4 wheels so the gap looks atrocious.. LOL

[EddieB]

Are you sure ET48 is correct? First, I'd want 275 rubber. Either way, that is super weak if correct. You'll want to max out and go 25mm front and 30mm rear, and hope you're pleased.

Mops@SupremePower - ET48 is correct. I felt 275 rubber would be too much rubber so wanted to go 265/30/20 but no luck finding that size in All Season. thanks for the info on the spacers though. I had a strong feeling that would be sizes I would need. hopefully it looks decent. Will post pics after this weekend!

thanks guys! :)

[Mops@Nemesis]

Mops@SupremePower - ET48 is correct. I felt 275 rubber would be too much rubber so wanted to go 265/30/20 but no luck finding that size in All Season. thanks for the info on the spacers though. I had a strong feeling that would be sizes I would need. hopefully it looks decent. Will post pics after this weekend!

thanks guys! :)

I actually ran 255/35. If you look back at my first set on the A5. The RS4 style. 20x9 ET40 with 15/20 on 255/35.

You could have spacers custom made by 44 draft. 33/37 would be ideal.

[EddieB]

I actually ran 255/35. If you look back at my first set on the A5. The RS4 style. 20x9 ET40 with 15/20 on 255/35.

You could have spacers custom made by 44 draft. 33/37 would be ideal.

I did see that set up during my search and really liked the look. I don't want too much of an aggressive look or for wheels to poke out. So I'm guessing 25f and 30r will probably do the trick but I hope it does affect the ride quality. I've ordered the H&R DRAs 25f and 35r.

[Brozee]

https://c3.staticflickr.com/9/8661/30321053522_2f9341b5a2_h.jpg (https://flic.kr/p/NcnjQS)DSC09050.jpg (https://flic.kr/p/NcnjQS) by kthung (https://www.flickr.com/photos/k_hung/), on Flickr

Ground Force GF06
20x10.5 ET30
Hankook Ventus Evo2
275/30/20

Sent from my XT1575 using Tapatalk

Looks great, but checkout my exact same setup ;)

http://i64.tinypic.com/efrsk6.jpg

http://i64.tinypic.com/fkyz6e.jpg

[Sweep]

Looks great, but checkout my exact same setup ;)

http://i64.tinypic.com/efrsk6.jpg

http://i64.tinypic.com/fkyz6e.jpg
👌👌👌

Sent from my XT1575 using Tapatalk

[ChaserBBS]

Just got my car out of the garage (after winter) with new wheels installed.

http://funccrew.kuvat.fi/kuvat/Kalusto/Eeron+A5/20160407_195209.jpg/small

Custom made Work Zeast ST2's (Imperial gold centers and polished lips)
Front: Middle concave 20x10,5" with 255/30
Back: Deep concave 20x11,5" with 295/25

What is your suspension set up?

[ironman9]

I still plan to lower my car, but figured I would still put my wheels on. Also kinda contemplating some sort of mild accents so the car & wheels don't look totally murdered out. Just not sure what would be a complimenting item for the car other than S5 mirrors, or..... something, ....I guess I have some work cut out for me, other than a lowering job[wrench] Also going to "try" 5mm wheel spacers for the rear wheels.... Pardon the dirt, haven't had a chance to wash my car with all the rain lately. (The tires still have dried soap on them from mounting them on the wheels. Driving me crazy that the rain hasn't washed some away.)

Wheels: XO Wheels
Size: 19x10
Tires: 255/35/19ZR
No idea what the offset is...sorry.

http://carphotos.cardomain.com/images/0019/95/10/19145901.jpg
http://carphotos.cardomain.com/images/0019/85/49/19145894.jpg
http://carphotos.cardomain.com/images/0019/85/09/19145890.jpg
http://carphotos.cardomain.com/images/0019/95/90/19145909.jpg

Hey. I like your diffuser. what diffuser is that and where did you get it from?

[nyca4tqm]

Stretch also makes your very expensive rims prone to damage from bruising and bumping and rocks...

[Black Howitzer]

love your car!

- - - Updated - - -


Vossen CV2 - 20x10.5 - et30
Hankook Ventus V12 - 275/30/20
H&R Coil overs
5mm spacer in rear

http://farm8.staticflickr.com/7058/6977074182_ebd5a39fcb_b.jpg

http://farm8.staticflickr.com/7076/6977074036_d3443a0ef1_c.jpg

http://farm8.staticflickr.com/7268/6977073934_1f053c057b_c.jpg

http://farm6.staticflickr.com/5450/7059698133_f51d7e9bfa_c.jpg

http://farm8.staticflickr.com/7128/7137465755_1d9db2ac38_z.jpg

sweet

[BuffDavid]

Here are some images from when I got my 20x10 ET30 VFF-102 Carbon Graphite wheels and 285/30/20 Hankook Evo 2s installed....the car was also bagged that day with a 3P AirLift Performance System.
Then the Blue Pics are when I decided to Liquid Wrap my Car A Carbon Blue Mix in a Satin Finish.
http://uploads.tapatalk-cdn.com/20161221/792fcfe33f6b8e01486af856a617b2b3.jpghttp://uploads.tapatalk-cdn.com/20161221/710792aa0db8dc4ab5e28b8e5f085ed8.jpghttp://uploads.tapatalk-cdn.com/20161221/d5da58e54d598e3839c16608d6937a87.jpghttp://uploads.tapatalk-cdn.com/20161221/f4b19e8a765c4c60c57304d985284bfa.jpghttp://uploads.tapatalk-cdn.com/20161221/bc5683973ebba1e1454ea400e8e20961.jpg

Sent from my SM-G935T using Tapatalk

[bamisthekey]

awesome! unique color for the wrap! how much was that or did you do it yourself?

[BuffDavid]

awesome! unique color for the wrap! how much was that or did you do it yourself?
I did it myself.
About $400 in materials.
2 hours to Spray, and about 6 hours of prep. Talking washing the car, clay bar, covering up the windows and stuff....pretty simple straight forward project.

Sent from my SM-G935T using Tapatalk

[Mops@Nemesis]

One set in stock... killer deal :) 20x10 ET25.

https://c6.staticflickr.com/6/5682/31286125341_d3e41af752_k.jpg (https://flic.kr/p/PEDz5a)NO.-6183 (https://flic.kr/p/PEDz5a) by Audiyos (https://www.flickr.com/photos/91999203@N06/), on Flickr

[DreDay]

@mops those are insane... love my CI-R and have multi-piece plans but... damn I would get these


Sent from my iPhone using Tapatalk

[Kjc11]

Can anyone help me with what size wheel I need for 13 s5 - niche targas

I have h&r sport springs and spacers ( not installed yet ) but not sure the best way to get the best looking result.



Sent from my iPhone using Tapatalk

[Sweep]

Can anyone help me with what size wheel I need for 13 s5 - niche targas

I have h&r sport springs and spacers ( not installed yet ) but not sure the best way to get the best looking result.



Sent from my iPhone using Tapatalk
Lol I told you everything you needed to know in your thread. Is there something that you're still confused about?

Sent from my SCH-I545 using Tapatalk

[Kjc11]

Lol I told you everything you needed to know in your thread. Is there something that you're still confused about?

Sent from my SCH-I545 using Tapatalk

I guess I'm just dumb, shall I order the
19 8.5
19 9.5
19 10

That's all I care about forget the springs spacers

Just want the rims to fit and fit the tires I have on the car already


Sent from my iPhone using Tapatalk

[Sweep]

I guess I'm just dumb, shall I order the
19 8.5
19 9.5
19 10

That's all I care about forget the springs spacers

Just want the rims to fit and fit the tires I have on the car already


Sent from my iPhone using Tapatalk



For a 9.5 inch wide wheel you probably want to aim for an ET 17, or an ET 42 if you use your current spacer setup.


Sent from my SCH-I545 using Tapatalk



Sent from my SCH-I545 using Tapatalk

[Kjc11]

Sent from my SCH-I545 using Tapatalk

....So I need a 9.5 why not an 8.5


Sent from my iPhone using Tapatalk

[Sweep]

....So I need a 9.5 why not an 8.5


Sent from my iPhone using Tapatalk
You could but you would need thicker spacers to get a flush look. I don't think they make one with low enough offset to use your existing spacers

Sent from my SCH-I545 using Tapatalk

[Kjc11]

You could but you would need thicker spacers to get a flush look. I don't think they make one with low enough offset to use your existing spacers

Sent from my SCH-I545 using Tapatalk

Okay gotcha so a 9.5 is what I need

Will my existing tire fit ?

Thanks a lot for all the help


Sent from my iPhone using Tapatalk

[Sweep]

Okay gotcha so a 9.5 is what I need

Will my existing tire fit ?

Thanks a lot for all the help


Sent from my iPhone using Tapatalk
Yep

Sent from my SCH-I545 using Tapatalk

[Kjc11]

Yep

Sent from my SCH-I545 using Tapatalk

Hey man so as I'm going to place the order for that wheel - 19 9.5 it says the offset is 25 ??? Which will not work right?? What now


Sent from my iPhone using Tapatalk

[Sweep]

Hey man so as I'm going to place the order for that wheel - 19 9.5 it says the offset is 25 ??? Which will not work right?? What now


Sent from my iPhone using Tapatalk
Is that the only offset in that width? Do they have anything around an ET 42?

Sent from my SCH-I545 using Tapatalk

[s vier]

One set in stock... killer deal :) 20x10 ET25.

https://c6.staticflickr.com/6/5682/31286125341_d3e41af752_k.jpg (https://flic.kr/p/PEDz5a)NO.-6183 (https://flic.kr/p/PEDz5a) by Audiyos (https://www.flickr.com/photos/91999203@N06/), on Flickr

Mine arrived. They (the one I opened) looks sick. I wasn't expecting the chrome rim guard but I guess I'll consider it a bonus;)

[Kjc11]

Is that the only offset in that width? Do they have anything around an ET 42?

Sent from my SCH-I545 using Tapatalk

It says on A 19 9.5 with et 45 won't fit that's why it's not giving me that option


Sent from my iPhone using Tapatalk

[Mops@Nemesis]

Mine arrived. They (the one I opened) looks sick. I wasn't expecting the chrome rim guard but I guess I'll consider it a bonus;)

Mine had them too. They all come with them. They're a SS rim guard. So if you curb, you pop the damaged one off, replace, and you're new again for $80 :)

[Sweep]

It says on A 19 9.5 with et 45 won't fit that's why it's not giving me that option


Sent from my iPhone using Tapatalk
Probably because they wouldn't fit without spacers. But you have spacers.

Sent from my SCH-I545 using Tapatalk

[Kjc11]

Probably because they wouldn't fit without spacers. But you have spacers.

Sent from my SCH-I545 using Tapatalk

Okay I'll just get them then... what would be wrong with a et 25 to far tucked in?


Sent from my iPhone using Tapatalk

[Kjc11]

Okay I'll just get them then... what would be wrong with a et 25 to far tucked in?


Sent from my iPhone using Tapatalk
Or like an 8.5 et 42



Sent from my iPhone using Tapatalk

[Sweep]

Or like an 8.5 et 42



Sent from my iPhone using Tapatalk
Nothing, you just won't get that flush look you wanted

Sent from my SCH-I545 using Tapatalk

[Kjc11]

Nothing, you just won't get that flush look you wanted

Sent from my SCH-I545 using Tapatalk

One last question I already ordered by why not get an et 25 and then u don't need spacers ?? Is there pros and cons to not using spacer and getting a wider wheel


Sent from my iPhone using Tapatalk

[joe180]

Are these still available?

[cam101]

Just had my wheels installed today.
HRE FF01 20x10.5 Silver
Not sure of offset. No spacers Nitto 555 tires 285/30/20

Sent from my SM-G928V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[cam101]

Just had my wheels installed today.
HRE FF01 20x10.5 Silver
Not sure of offset. No spacers Nitto 555 tires 285/30/20

Sent from my SM-G928V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

https://uploads.tapatalk-cdn.com/20170119/956920b025991f9378cd2b405dd88543.jpg

Sent from my SM-G928V using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[GOAZFRS5]

http://www.audizine.com/forum/attachment.php?attachmentid=33609&d=1485278741

I havent posted any pictures of my 2015 suzuka gray RS5!! - She will be in the market soon, final fare wells. I had a blast on this build!! If you guys are interest on some great deals on any the wheels sets I own which I have 3 sets of rims for the RS5 -LETS SAY I PUSHED THE LIMITS-ON THE WHEEL COMBOS AND ALL HAVE WORKED WITH OUT PULLING FENDERS OR MAJOR ROLLING -send me a email: [email protected] or the whole car itself will be posted for an extremely great price -- will come with so many goodies--

Thanks guys!!

[kearsey]

I'm running 18x9.5 et 15 all around, I had 255/40's on them last year but they didn't line up with the body, like I was hoping
Leaning towards running a wider tire that would square up with the wheel well, wondering what would be a nice meaty size, 275/35?

Also the cars lowered on H&R Sports
25 3/4" to the fender front and back

I'm not a fan of the stretched look on a car that isn't slammed.

Cheers,

[Signature Wheel]

Signature "SV104" MonoBlock

Gloss Black
20x10
20x10.5

Audi RS5 :)

https://c1.staticflickr.com/1/775/32404372501_9ebcba4c68_b.jpg



Please feel free to contact me directly, email, or direct message.

[Atzek333]

can you help me please, will fit 10,5x20 et25 with 275 25 20 in the rear fully lay down with airride ? maybe with full camber ?

[Mops@Nemesis]

can you help me please, will fit 10,5x20 et25 with 275 25 20 in the rear fully lay down with airride ? maybe with full camber ?

You'd want 265/30 I think. 275/25 is too wide and the sidewall is too thin

@bknewtype

[bknewtype]

can you help me please, will fit 10,5x20 et25 with 275 25 20 in the rear fully lay down with airride ? maybe with full camber ?


You'd want 265/30 I think. 275/25 is too wide and the sidewall is too thin

@bknewtype

275 30 with et 24 here



https://uploads.tapatalk-cdn.com/20170128/4ce7726c9d6286856121f65dee9d69cb.jpeg

https://uploads.tapatalk-cdn.com/20170128/1209105d81e6e374ac27be70459505fa.jpg

https://uploads.tapatalk-cdn.com/20170128/7f251f81465988c24749901dcb055840.jpg

Sent from my iPhone using Tapatalk

[GOAZFRS5]

LETS JUST SAY-325 ALL AROUND WORKS :) 20X12 ALL AROUND -WITHOUT A PROBLEM - THESES ARE UP FOR GRABS AS WELL EMAIL ME IF INTERESTED [email protected] or the whole car -

http://www.audizine.com/forum/attachment.php?attachmentid=34007&d=1486139369
http://www.audizine.com/forum/attachment.php?attachmentid=34008&d=1486139392
http://www.audizine.com/forum/attachment.php?attachmentid=34004&d=1486139322
http://www.audizine.com/forum/attachment.php?attachmentid=34006&d=1486139350
http://www.audizine.com/forum/attachment.php?attachmentid=34005&d=1486139330

[DOT]

Wow. What offset are you running and what suspension?

[DOT]

Ferrada FR3 with custom paint.

20 x 10.5 all round running 285/30/20 Michelin PSS still

KW DDC ECU suspension.



http://i602.photobucket.com/albums/tt108/jamin00/Car/IMG_3488_zpsvr2dldvn.jpg (http://s602.photobucket.com/user/jamin00/media/Car/IMG_3488_zpsvr2dldvn.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/IMG_3482_zpsjbkg0npw.jpg (http://s602.photobucket.com/user/jamin00/media/Car/IMG_3482_zpsjbkg0npw.jpg.html)
http://i602.photobucket.com/albums/tt108/jamin00/Car/IMG_3492_zpssoms2j5y.jpg (http://s602.photobucket.com/user/jamin00/media/Car/IMG_3492_zpssoms2j5y.jpg.html)

Very nice. What offset are you running?

[DOT]

Please help, I want to upgrade my stock A5 sportback with 20x10 all around. Will there b any problem if the offset is 35?

I'm currently on that setup with H&R OE sport springs and no issues.

[jamin_00]

Wow. What offset are you running and what suspension?

:D

That is ET30 with the KW DDC ECU suspension

[JOHN-GEE]

I'm looking for pics from anyone with 19 x 9.5j et25 wheels fitted, pics from a side angle would be great to see how they sit in the wheel arches.

Much appreciated.

JG

[Bucktown]

One set in stock... killer deal :) 20x10 ET25.

https://c6.staticflickr.com/6/5682/31286125341_d3e41af752_k.jpg (https://flic.kr/p/PEDz5a)NO.-6183 (https://flic.kr/p/PEDz5a) by Audiyos (https://www.flickr.com/photos/91999203@N06/), on Flickr

These still around? Please pm me a price if so!

[Mops@Nemesis]

These still around? Please pm me a price if so!

All gone. Sorry :/

[importfanatic17]

I'm looking for pics from anyone with 19 x 9.5j et25 wheels fitted, pics from a side angle would be great to see how they sit in the wheel arches.

Much appreciated.

JG
Anyone? The TE37's i want are these exact specs so I'm in for pics too

Sent from my SM-G935P using Tapatalk

[DOT]

:D

That is ET30 with the KW DDC ECU suspension

Impressive.


Sent from my iPhone using Tapatalk

[SelvaEng]

2011 S4
Wheels: Avant Garde M368 19x9.5 et20 No Spacers.
Tires : 255 35R19

The first photo is the stock car as I bought it.

http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160729_092808_zpsucfvhtr4.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160729_092808_zpsucfvhtr4.jpg.html)

Next photos are after installing the H&R Sport Springs and Wheels.

http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160804_194951_zpsontqpxqz.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160804_194951_zpsontqpxqz.jpg.html)


http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160804_170909_zpsbx5twlx8.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160804_170909_zpsbx5twlx8.jpg.html)


http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160804_170919_zpsblw7ky7m.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160804_170919_zpsblw7ky7m.jpg.html)


http://i1268.photobucket.com/albums/jj561/Selva_Racing/20160804_170930_zpsxue86gnh.jpg (http://s1268.photobucket.com/user/Selva_Racing/media/20160804_170930_zpsxue86gnh.jpg.html)


I'm looking for pics from anyone with 19 x 9.5j et25 wheels fitted, pics from a side angle would be great to see how they sit in the wheel arches.

Much appreciated.

JG



Anyone? The TE37's i want are these exact specs so I'm in for pics too

Sent from my SM-G935P using Tapatalk

Hello. I posted pics on this thread with a setup similar to what you want. I think I have reporsted the pics correctly above, if not, Look at Post # 1673, on page 42 of this thread. My Black S5 with Avant Garde wheels in Matte Gray. 19x9.5 all around with et20mm. In the pics, those are Continental tires 255/35R19. I have switched to a 265/35R19 all around and they have no problem with rubbing and are exactly flush front and rear. Mops here on this forum has advised me I can throw a 3mm spacer in the rear to push them out a little more, maybe I will maybe not, I am thinking about selling these wheels and getting something else. Also, I have the H&R sport lowering springs. They are great, nice firm ride but daily driver friendly. Let me know if you have any questions.

[sirmium]

anyone wanting set of brand new Continental DWS 275/30/20 $630+ship($80ish) ? let me know

[JTFisch90]

Hey guys,

I didn't want to read through 44 pages so I'm sorry if this is a redundant question:

I'm looking to purchase my first set of non-stock wheels and tires. I'm interested in the pros and cons of 8.5 width vs 9.5 width. Or running 8.5's in the front and 9.5's in the rear. What's your opinion and experience with this?

Thanks,

[bknewtype]

Hey guys,

I didn't want to read through 44 pages so I'm sorry if this is a redundant question:

I'm looking to purchase my first set of non-stock wheels and tires. I'm interested in the pros and cons of 8.5 width vs 9.5 width. Or running 8.5's in the front and 9.5's in the rear. What's your opinion and experience with this?

Thanks,

Majority is for looks. A 8.5 wheel would be better for winter. 9.5 gives more concave depending on the profile of the wheel



As long as ur offsets are proper to accommodate the stagger effect ur good


Sent from my iPhone using Tapatalk

[JTFisch90]

Majority is for looks. A 8.5 wheel would be better for winter. 9.5 gives more concave depending on the profile of the wheel



As long as ur offsets are proper to accommodate the stagger effect ur good


Sent from my iPhone using Tapatalk

So the extra surface area of the 9.5's doesn't make a noticeable difference in grip or handling or cornering?

The wheels I'm looks at have an offset of 35mm for the 8.5's and 45mm for the 9.5's. Would that be adequate without spacers for an S5 B8.5?

[mcbuck]

Hey guys,

I didn't want to read through 44 pages so I'm sorry if this is a redundant question:

I'm looking to purchase my first set of non-stock wheels and tires. I'm interested in the pros and cons of 8.5 width vs 9.5 width. Or running 8.5's in the front and 9.5's in the rear. What's your opinion and experience with this?

Thanks,

I always do full tire rotations (with non-directional tires) so staggered is out for me.

[bknewtype]

So the extra surface area of the 9.5's doesn't make a noticeable difference in grip or handling or cornering?

The wheels I'm looks at have an offset of 35mm for the 8.5's and 45mm for the 9.5's. Would that be adequate without spacers for an S5 B8.5?

Def needs spacers. Will need about 20-25mm to remain flush

I mean i dont think much ppl here pushes the car to the limits where they notice a diff in performance of a 8.5 wheel vs 9.5. I dont notice it but i only do street driving


Sent from my iPhone using Tapatalk

[JTFisch90]

Awesome.
Thanks for the advice!
I'll definitely take it into consideration when deciding.

So what's the stock offset for a stock 18x8.5 S5 B8.5 wheel? ET29? Wouldn't that mean I need 10mm spacers (at most) on a ET35 wheel to get as close as possible to flush?

[Mops@Nemesis]

Awesome.
Thanks for the advice!
I'll definitely take it into consideration when deciding.

So what's the stock offset for a stock 18x8.5 S5 B8.5 wheel? ET29? Wouldn't that mean I need 10mm spacers (at most) on a ET35 wheel to get as close as possible to flush?

Stock is ET32. You'll want 20/25 with either setup. I ran a 9.5 ET35 with 15/20 on 275. Zero rub.

[mcbuck]

Stock is ET32. You'll want 20/25 with either setup. I ran a 9.5 ET35 with 15/20 on 275. Zero rub.

the gods have spoken!!! Heed or suffer eternal damnation![:D]

no shit, OP. Mops is the authority...

[JTFisch90]

Stock is ET32. You'll want 20/25 with either setup. I ran a 9.5 ET35 with 15/20 on 275. Zero rub.

My lord Mops, thank you for your guidance!

Is there any issue with running staggered 15/20? As opposed to running straight 15/15?

I'm a newble to new wheels.... please don't smite me for questioning your power!!! [hail][evilsmile]

[Mops@Nemesis]

Lol! [>_<]


My lord Mops, thank you for your guidance!

Is there any issue with running staggered 15/20? As opposed to running straight 15/15?

I'm a newble to new wheels.... please don't smite me for questioning your power!!! [hail][evilsmile]

No worries. This stuff is cake once you get your head around it. Only took me about 5 years [:p]

No issues at all. With my 5, I always ran at least 3mm more at the rear, and usually 5mm.

Terrible pics, but said 9.5 ET36 with 15mm front and 20mm rear on 275 with a 25mm drop.

https://c1.staticflickr.com/9/8219/8434811524_0c8457887e_o.jpg (https://flic.kr/p/dRmBAU)DSCN0580 (https://flic.kr/p/dRmBAU) by Audiyos (https://www.flickr.com/photos/91999203@N06/), on Flickr

https://c1.staticflickr.com/9/8095/8434800806_1f2a499eb6_o.jpg (https://flic.kr/p/dRmyq7)photo (https://flic.kr/p/dRmyq7) by Audiyos (https://www.flickr.com/photos/91999203@N06/), on Flickr

Tons more pic of wheel sets on my A5 in the Flickr. I ran 10 or so sets.

[JTFisch90]

YUP. NICE.
That's what I'm going with.
Again, thanks for the knowledge.

[bknewtype]

My lord Mops, thank you for your guidance!

Is there any issue with running staggered 15/20? As opposed to running straight 15/15?

I'm a newble to new wheels.... please don't smite me for questioning your power!!! [hail][evilsmile]

Mops already covered it but i always ran staggered on my cars. No issues


Sent from my iPhone using Tapatalk

[JTFisch90]

Just to recap;

For a 19x8.5 wheel with a ET35, the spacers needed to have the wheel flush with the bumper would be 20/25. Correct?

If possible, would you recommend I go with a 20/22 or 22/25 since I've heard the front to read difference is closer to 3mm? Or does the 5mm difference look best?

Sorry for all the questions. I just don't want to waste time and money on the wrong spacers.

[bknewtype]

Just to recap;

For a 19x8.5 wheel with a ET35, the spacers needed to have the wheel flush with the bumper would be 20/25. Correct?

If possible, would you recommend I go with a 20/22 or 22/25 since I've heard the front to read difference is closer to 3mm? Or does the 5mm difference look best?

Sorry for all the questions. I just don't want to waste time and money on the wrong spacers.

I would stick with 20/25 as its a common fit and u can always sell it back easily when u r done with it


Sent from my iPhone using Tapatalk

[Dan255]

- Avant Garde M510 20x10
- ET 35 front / ET 25 rear
- Satin Silver
- Toyo Extensa 275/30/20
- KW H.A.S. kit 26.5" FTG IIRC
https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/17800290_10209267882159364_1992263583775339357_n.j pg?oh=fd4ea83491769efd325a05c599162db3&oe=5950A0F6

[bhvrdr]

Guys I need your advice please.

I ordered a set of Ace Alloys AFF02 in a 19x9.5" fitment and an ET35 offset. I received instead a set of 19x9.5 in ET20 offset.

My plan is to put on 275/30/19 tires ... possibly some aggressively wide tires ala R888 or RE71.

I'll be lowered no more than 1" ... track lower not stanced look. I dont plan on more than 2 degrees neg camber.

I'll be driving very aggressively including hitting track kerbs so the suspension will definitely be compressing.


Is the 19x9.5 ET20 with 275/30/19 in wide R888 rubber going to be ok without rubbing in these conditions?

Thanks a bunch.

Mike

[Mops@Nemesis]

I'm thinking it worked out pretty well, Mike. With a 25mm drop, -2 and 275, you should be perfect.

I did 20x9.5 ET21 front and ET16 rear on 275 dropped 25mm, and never once touched. And I'm an aggressive driver.

[bhvrdr]

Thanks very much for taking the time to reply. I appreciate it. Now the r888 can run .5 inch or more wider than other 275 tires. Strange but true. So I have to ask, were you close or was there some wiggle room?

Thanks again.

Mike

[Mops@Nemesis]

Thanks very much for taking the time to reply. I appreciate it. Now the r888 can run .5 inch or more wider than other 275 tires. Strange but true. So I have to ask, were you close or was there some wiggle room?

Thanks again.

Mike

Yep, I considered that. I had good room IIRC, and I was also around -1.4. I'm 99% sure you're good.