led resistors

[turbofreakk13]

I went online and purchased a number of different LED city lights, i dont get a bulb out but the lights constantly flicker. Does anyone know where i can purchase resistors? Whether its online or a local shop. I appreciate any help you guys can give me. thanks azine

[zachf88]

http://autolumination.com/equalizers.htm

[redlabel81]

Just get the ECS Ziza set.....

[turbofreakk13]

unfortunately im really not good with this whole lighting, wattage, ohms thing. Im using a normal 194 wedge led bulb. blacklight color. Do you happen to know what resistor or load equalizer i would have to use? once again thanks for all your help.

[whitevdub]

bro your using a blacklight color LED bulb for the city light? im curious to see how that would look..i say just get the ECS tuning LED city light with resistor, youll get no folicker or bulb out warning. its just plug and play. i ended up getting the ones buttafuoco made on here, he set it up with an resistor and its perfect.

[turbofreakk13]

assuming i did do that... would i be able to take the resistors off of those LEDs and use them on the ones i got? the blacklight color is actually sick. right now im using a blue halogen as the city lights (looks aqua) and black light as my side marker turning bulbs. I am gettin a bulb out warning on my sidemarkers , but i was planning on gettin the blacklight for the city light too.

[cstarky15]

you should be able to swap the lights in and out of the ECS ones! They tend to fall out so i can't see why they wouldn't be able to use different lights!

I hope you don't have stains on your car that the blacklight will show [;)]

[turbofreakk13]

lmao..well thankfully the city lights r the black lights, not my map lights [cool].. just kiddin.. i couldnt disrespect my baby like that. (my car)

[eMacPaul]

Can you post some pics of the black lights?

[turbofreakk13]

yeah its gunna be a lil hard to tell because right now theyre installed in my side markers but i will def get apic asap i cud tell u ive turned alot of heads and been asked lots of questions. the blacklights emit an almost purply glow, they r awesome.

[zachf88]

ok, this is what you need: 15-25 Ohm, 25 watt and just tap into the stock wire, right before the socket. Then, just double stick tape the resistor to the headlight cap!

Don't buy the one from ECS..... If you have the bulb, then all you need is the resistor!

[redlabel81]

^^ I think that would melt the cap....Or will it? I think that resistor will get very hot.

[turbofreakk13]

yeah i thought about that also. i may suck it up and buy the ecs versions and just switch out the bulbs.

[turbofreakk13]

okay before i purchase the ECS ZiZa set, i want to know if you can DEFINITELY switch out that bulb for a bulb of my own. anybody have any experience with these products?

[XCELR8]

I have one I didn't use for the plate lights if you want it. PM me for details.