Re-finishing curbed AVUS wheels

[Slow4]

So my Avus wheels came like this when I first got it. Didn't want to fix it at first and leave it be, but over the months of the first year, it started getting on my nerves...so now I'm working on it. Any suggestions to help me along this process would be awesome.

http://i278.photobucket.com/albums/kk103/slow4_703/ToTheHeavens.jpg
Day after purchase...this is how the wheels look
____

http://i278.photobucket.com/albums/kk103/slow4_703/3.jpg
http://i278.photobucket.com/albums/kk103/slow4_703/4.jpg
http://i278.photobucket.com/albums/kk103/slow4_703/5.jpg
Curbage markings
____

http://i278.photobucket.com/albums/kk103/slow4_703/8.jpg
After I sanded it down with 320 Grit, and than with 800 grit
____

http://i278.photobucket.com/albums/kk103/slow4_703/9.jpg
Applied bondo to the areas that had curbage
____

http://i278.photobucket.com/albums/kk103/slow4_703/0.jpg
Applying primer to the wheel

Now, to sand it down and add paint

[heateris]

nice work, i would tape off the wheel alittle more.

[Poopie]

looking good so far. I would do a light sanding on the primer then spray the base coat. do a few coats and then another light sand. After that lay another layer of base coat. Then clear it.