View Full Version : Lowering Question (please help)
shortyepic
05-10-2008, 04:32 PM
i have a b7 titanium package with stock 18's and sport suspension. how does this setup look? (i dont want to get coilovers)
H&R RACE Springs
H&R Trak+ 10mm front 12mm rear spacers
tdavit
05-10-2008, 06:24 PM
but you are going to get springs. not such a good idea...
shortyepic
05-11-2008, 01:03 AM
do u guys think it will rub with this setup?
Tunerstop
05-11-2008, 03:29 AM
No it will not rub, H&R only makes sport springs. Race Springs are not available for B6/B7's
shortyepic
05-11-2008, 02:05 PM
bump please??
Phrost
05-11-2008, 02:19 PM
If 10mm and 12mm will push your oem wheels out to make them about flush, I don't see any problems. You may have to remove the torx screw at the top edge of the front fender liners, but H&R Sport springs just don't drop that low where it becomes a problem I have heard.
shortyepic
05-11-2008, 02:43 PM
should i get race or sport springs from h & r?
Tunerstop
05-11-2008, 04:25 PM
h&r Race Is Not Available
Phrost
05-11-2008, 06:19 PM
^ Yup. I believe H&R Sport springs drop the lowest (1.7" front, 1.6" rear) for just springs. If you want to go lower, you'll have to buy coilovers.