Big thanks to Kristokes for helping install my Kerscher CF Splitter

[Raistlin]

Real cool and good guy , thanks again for all of your help!

[EuroA4]

Looks good...you should try to get a shot from on the ground straight at the bumper...looking down from above does not give the best angle.

[Sanjman]

Nice!! Side pictures please!!! Thanks

Also, where did you buy from and how $$$?

[i3oricua]

Nice!! Side pictures please!!! Thanks

Also, where did you buy from and how $$$?

Yeah, what he said!!!

[Raistlin]

I purchased from James @ Creative, he is an AZ member and sponsor, I think.

http://www.creativeautoworks.com/sto...oducts_id=4011

I will try to get some side pics soon.

[i3oricua]

Cool, I can't believe it took me so long to see it since its been in their catalog since 31 December, 1969. Trying to talk the wife into letting me order it.

[TrboPowr]

yeah the kerscher splitters are crap dude, i had one bolted on there solid and it tore off......its very thin for what its supposed to do

i got the deval now and couldnt be happier.....
just keep checkin on it incase it starts cracking

[Raistlin]

It is thin, but I can't see how it would crack unless you did something to cause it to crack (hit something).

The Deval one looks like it is going to be a PIA to install because it looks like it is very wide in the middle where as the Kerscher is not. When the Kerscher is installed I can just barely still put back my belly pan. From the pics of the Deval it looks like it will cover those spots where you screw your belly pan in.

[DownUnderSLine]

Looks neat

I want one but holding out for something that actually its the B7 bar properly. These Kerscher lips are still the B5/B6 product.

I pray to the CF Gods for a properly designed B7 Sline CF front lip !!!

[Raistlin]

Looks neat

I want one but holding out for something that actually its the B7 bar properly. These Kerscher lips are still the B5/B6 product.

I pray to the CF Gods for a properly designed B7 Sline CF front lip !!!

Just get it, there will probably never be one made for the B7. This lip actually fits very well, suprising well. And on the s-line bumper this will look even better because of the shape of your bumper.

[quattrosaint]

looks awesome!

[turbo4s]

I know just where u live. I live 7min from there

[Raistlin]

I know just where u live. I live 7min from there

That's cool, too bad there are no meets around here. I remember like five years ago (when I had my B6) a bunch of local AZ members used to meet up at short hills mall. I know a lot of people go up to edgewater and rutherford, little too far for me.

You live in Union, Roselle Park, Elizabeth or Kenilworth?

[KMHPaladin]

You're in Wayne, Raistlin?

[Raistlin]

You're in Wayne, Raistlin?

No, Union.

I used to live in Clifton though, that is pretty close to Wayne.

[Raistlin]

Cool, I can't believe it took me so long to see it since its been in their catalog since 31 December, 1969. Trying to talk the wife into letting me order it.

Well my wife approved by looking at pics, then once I got it installed she liked it even more.

I really like how it adds to my non s-line bumper. I was a bit bummed that I did not get the s-line, but this splitter and the S4 door blades & rear lip spoiler I am getting will be perfect. And I actually like the non-sline rear bumper better than the s-line one so it is a good trade off for me.

[Types Cnversion]

Ill be jumping on this very very soon.

[KMHPaladin]

No, Union.

I used to live in Clifton though, that is pretty close to Wayne.

Ah, okay... I'm pretty sure the King Chef Buffet is in Wayne, no?

[Raistlin]

Ah, okay... I'm pretty sure the King Chef Buffet is in Wayne, no?

I don't know, maybe it is. But that King Chef Buffet is in Union. I guess they are all over the place...

[B6SPEC]

very nice.

[KMHPaladin]

I don't know, maybe it is. But that King Chef Buffet is in Union. I guess they are all over the place...

Heh, okay, sounds good. I don't go to Edgewater too often but maybe I'll see you there one of these days.

[i3oricua]

yeah the kerscher splitters are crap dude, i had one bolted on there solid and it tore off......its very thin for what its supposed to do

i got the deval now and couldnt be happier.....
just keep checkin on it incase it starts cracking

Where did you get your deval one from and how much did you pay for it? If you don't mind

Thanks.

[Sanjman]

Hey... I've been to Wayne, New Jersey... a buddy of mine lives there... not sure where I went but I all I gotta say is you guys have some RAUNCHY strip clubs...

[kristokes]

looks niice. really makes tha front look lower.

btw i cant see how this would jus break or crack unless you hit something HARD!

im LOW AS FCK to tha ground and i've hit my lip on many driveways A LOT! and it's scrattched from tha bottom but it has never cracked!

btw it was niice meetin u raistlin. you're car is fck'n cleaaan! i miss that new car feeel. lol

i'll be more than happy to help you devirginize your car anyday!

cant wait to see you're upcoming mods, like a FLASH and a TP ftmfw!!

[suprtran]

Is it me or does the Kerscher splitter look a bit too NARROW for the wideness of the B7 front bumper? It just doesn't look wide enough...like it falls just a little short on either sides in terms of fully wrapping around the front bumper. Is the lip meant for a B6 or B5?

Is it the same lip as the one on this car:

[DownUnderSLine]

Is it me or does the Kerscher splitter look a bit too NARROW for the wideness of the B7 front bumper? It just doesn't look wide enough...like it falls just a little short on either sides in terms of fully wrapping around the front bumper. Is the lip meant for a B6 or B5?
...

Nope - I agree with you.... While you can 'get away with it', this lip is for the B6/B5. It's not the best match to the B7 bar at all.... Too narrow and doesn't finish off at the ends very well.

[suprtran]

Nope - I agree with you.... While you can 'get away with it', this lip is for the B6/B5. It's not the best match to the B7 bar at all.... Too narrow and doesn't finish off at the ends very well.

phew...i thought i was the only one who noticed that. does look pretty good though

[Six Speed Turbo]

It does look a little too narrow, but it still looks nice.

[Raistlin]

I think if this splitter was wider on the sides it would not look good. Our bumper curves down and in on the sides (don't know if I am explaining well) so if the splitter stuck our more on the sides it may not look good.

Obviously this splitter is meant for a Kersher B6 Front bumper, it is not meant for the B7 bumper. But I think it definately looks good on the bumper and I don't think there is ever going to be one made for our cars so I went with this one.

Very easy to remove, so if one ever does come out would be a very easy switch.

[suprtran]

I think if this splitter was wider on the sides it would not look good. Our bumper curves down and in on the sides (don't know if I am explaining well) so if the splitter stuck our more on the sides it may not look good.

Obviously this splitter is meant for a Kersher B6 Front bumper, it is not meant for the B7 bumper. But I think it definately looks good on the bumper and I don't think there is ever going to be one made for our cars so I went with this one.

Very easy to remove, so if one ever does come out would be a very easy switch.

Is the lip full CF or just CF laminate over fiberglass?

[Raistlin]

I believe it is full CF, but I don't really know.

[kristokes]

it's 100% CF.. not a wrapping

[Sanjman]

Still waiting on a side picture :P

Thanks!

[Raistlin]

Still waiting on a side picture :P

Thanks!

Well here you go!! Took a bunch of pics, got my S4 Door Blades on also!!

[John1.8T]

Nice!

[Types Cnversion]

ya this is definetly going on this weekend.

[Raistlin]

When you install just be carefull drilling holes. The splitter has dimples on the inside where you are supposed to drill. The ones on each end towards the tires must be drilled a little further away to avoid the mud flap thing that is there, so don't pre-drill those holes in the splitter. The next one is ok, then the one after that one I did not drill, it is very close to the radiator and very hard to get ur hand in there so we did not install screws in that spot. The ones in the middle are pretty easy, gotta work you hand into the bumper from those bottome holes in the lowest center part of bumper.

Kristokes said he used velcro when he installed his because he did it alone. Highly recommend two people. Just make sure you line it up to your liking.

[Quattro]

wow those some nice mirrors and splitter

[kristokes]

clean as fck!

[Types Cnversion]

Thanks for that info, im just going to order it from Creative. Also did it take long for it to be shipped out to you?