Bleeding coolant system

[Jnguye15]

Hi. I have an 11 a4. My car started overheating so i replaced thermostat. I flushed block, radiator, and heater core. My car is still overheating.... i bled the system with the bleeder hole on top of the heater core hose and with the reservoir cap off. I also did a compression and block tester test to make sure head gasket was good. Any ideas or suggestions?

[LTopher]

Have you checked the radiator fan or fan relay?

You may want to change the thread title to something more accurate along with posting this in the main B8 A4 area. Might get more replies that way.

[doublespeeded]

Does anyone have a photo of this bleeder hose?

I cant seem to find any info on it.

Can the Gen 2 bleed itself?

[mtroxel]

Google "B8 coolant bleed hole", then click on images. There are tons of pictures from every angle.