Vag com killed my stop start

[kenny kustom]

2013 q5 3.0. Did a few vag com mods.
Don't remember all of them.
Ever since, my stop start doesn't work.
All the variables met. Still nothing.
Engine up to temp, heater off, steering wheel straight. And nothing.
Anyone else have any issues?

[spijun]

Start-stop system
http://www.audi.com/com/brand/en/too...m.browser.html


Find the folder on your drive C: Ross Tech / VCDS / Debug
There you have: CodingLog.TXT and AdpLog.TXT
Here are all the changes that you have made

Example:

Address 47:8T0 035 223 S recoded (Long Coding) from 0101010302 to 0102010302 (00711/711/03018) Thursday,13,October,2011,22:48:30:10074
Address 47:8T0 035 223 S recoded (Long Coding) from 0102010302 to 0101010302 (00711/711/03018) Thursday,13,October,2011,22:48:45:10074
Address 17:8R0 920 930 B recoded (Long Coding) from 031F220003000008010001 to 031E220003000008010001 (00711/711/69905) Tuesday,18,October,2011,11:51:00:10074
Address 17:8R0 920 930 B recoded (Long Coding) from 031E220003000008010001 to 031F220003000008010001 (00711/711/69905) Tuesday,18,October,2011,11:51:22:10074
Address 17:8R0 920 930 B recoded (Long Coding) from 031F220003000008010001 to 031F220003000608010001 (00711/711/69905) Tuesday,18,October,2011,11:53:03:10074
Address 17:8R0 920 930 B recoded (Long Coding) from 031F220003000608010001 to 031F220003000008010001 (00711/711/69905) Tuesday,18,October,2011,11:54:44:10074
Address 47:8T0 035 223 S recoded (Long Coding) from 0101010302 to 0103010302 (00711/711/03018) Friday,21,October,2011,13:57:14:10074

Thursday,15,December,2011,14:45:53:10074
Address 55:8K0 907 357 B channel 10 adapted from 1 to 0 Thursday,15,December,2011,15:05:26:10074
Address 08:8T1 820 043 AQ channel 47 adapted from 0 to 5 Monday,19,December,2011,13:17:27:10074
Address 08:8T1 820 043 AQ channel 47 adapted from 5 to 0 Monday,19,December,2011,13:19:00:10074
Address 46:8K0 907 064 DT channel 69 adapted from 0 to 1 Monday,19,December,2011,13:21:07:10074
Address 46:8K0 907 064 DT channel 1 adapted from 51168 to 55264 Monday,19,December,2011,13:41:59:10074
Address 46:8K0 907 064 DT channel 69 adapted from 1 to 0 Wednesday,21,December,2011,12:13:20:10074
Address 46:8K0 907 064 DT channel 1 adapted from 55264 to 51168

This is from the German Forum
The engine control unit, you have to disable the option for start / stop system.
Please note: currently only known and available for 2.0 TFSI
The following coding is used:

01 ENGINE to select
STG Long Coding -> Function 07
Byte 5
Disable bit 6

In addition, disable switch in the center console:
09 – Cent. Elect. to select
Long Coding -> Function 07
Byte 20
Disable bit 2

[subsonique]

spijun, nice!

[kenny kustom]

Made a shocking discovery this weekend.
Sitting in the long line at the boarder.

Stop start only works with your seatbelt on.......

It worked wonderfully.

[spijun]

Made a shocking discovery this weekend.
Sitting in the long line at the boarder.

Stop start only works with your seatbelt on.......

It worked wonderfully.

The start-stop function only works when …

- driver’s door and the bonnet are closed
- driver is wearing a seat belt
- vehicle has been driven at faster than 4 km/h before stopping
- vehicle is not pulling a trailer


http://www.audi.com/com/brand/en/too...m.browser.html

[Cottonmouth]

My start/stop works without seatbelt on.

I lean in and with one hand push the brake and the start an it works every time.

[D_Frost]

The OP is referring to automatic start/stop:

http://www.audi.com/com/brand/en/mod...tart_stop.html

[eliouno]

The start-stop function only works when …

- driver’s door and the bonnet are closed
- driver is wearing a seat belt
- vehicle has been driven at faster than 4 km/h before stopping
- vehicle is not pulling a trailer


http://www.audi.com/com/brand/en/too...m.browser.html

My Q5 6 cyl, 2013 has a motor cut off if I open driver door.
anyone know how to remove that
A pain in the A.. Need ton restart motor everytime I open driver door