Saw we don't have one here and realized some people would like/need some photoshops done. My photoshop skills aren't great but I know the basics and I can get around. I'll do my best to make anything you need look good.
If you want to see what wheels will look like on your car before you buy them, or in my case, how you wish you car looked like , just post up picture(s) of your car and picture(s) of the wheels.
Post up anything, I'm up for a challenge!
Just something I did since I'm bored. (Picture belongs to BastardS4. I found the picture in the Silver S4 gallery, hope you don't mind me using it.)
Before:
After:
If you would like some work done, please follow this format (It will make the photoshoppers life much easier and you will get the work done quicker):
1) Please state what you want in a clear, concise, and grammatically correct manner.
2) Supply ALL necessary pictures. These include a picture of a.) your car, b.) the wheels (or whatever else) on another car at AS CLOSE OF AN ANGLE AS YOU CAN POSSIBLY FIND TO YOUR PICTURE, and c.) pictures of desired wheel finish or whatever, if applicable.
If not possible, we will do our best to come up with something or find something. NO Guarantees!
3) Keep in mind that we photoshoppers are spending a lot of our own personal time to help out, so please be grateful for any and every attempt. If you want us to help you, give us a reason to.
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
haha what if i ask you to do a lot haha like an rs4 bumper with shaved vents and s4 side skirts haha and then color match it all my melange color would u be capable of that?
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
haha what if i ask you to do a lot haha like an rs4 bumper with shaved vents and s4 side skirts haha and then color match it all my melange color would u be capable of that?
PM me with all the info and pictures. I'll do my best
PM me with all the info and pictures. I'll do my best
On it ^^ Any specific colors?
haha will do! may take me a min to get some pics together haha it may be hard to match my color tho its called melange metallic youll see what i mean in the pics if you dont know the color
If i find someones car who i want mine to look like cougha4robcough can you take the color from my car and put it on his? and then the wheels i want? that way may be easier
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
I have a feeling that you're about to get overwhelmed.
Props, though. Good idea. Other people with photoshop skills may want to join in and just keep this the collective pshop thread.
Haha, looks like it will be a long night
Thanks, I enjoy doing this, but if someone would like to help out, that would be great!
Originally Posted by ThatA4T
haha will do! may take me a min to get some pics together haha it may be hard to match my color tho its called melange metallic youll see what i mean in the pics if you dont know the color
If i find someones car who i want mine to look like cougha4robcough can you take the color from my car and put it on his? and then the wheels i want? that way may be easier
I'll try the second idea, that might be a lot quicker. Post up the pictures of what the color of your car is and cougha4robcough. Might take some tweaking to get the exact color down, but I'll try.
If that doesn't work out, I'll give the other idea a shot.
Didn't know what color you wanted, hope these will be alright. Let me know if you want a different color. I'll try to do the 701s tonight as well, just need to find the right picture.
Originally Posted by kbS42001
kudos to you sir
i may be making a request soon and ill keep you in mind cuz my photoshop skills are in the shitta
Im going to start this off my saying some of this may be difficult haha so just do what you can lol no need to spend an entire evening on it haha (well unless u want
here is my color
These are the wheels i would like but with the lip the color of my car if possible haha and the black roof and mirrors plz! this one is my color as well if its easier to work with
Here is robs car hope you dont mind rob! but id like to see the stock mirrors in stead of his (in black) (if possible) haha and the grille rings the color of my car with the trim blacked out
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
oh ya and you got 4 min and thirty seconds left!!!! haha
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
oh ya and you got 4 min and thirty seconds left!!!! haha
That will be $50 jk
What is the brand/model of the wheels you want on the car? So basically I would be putting those wheels, mirror and color (front rings and lip) on robs car?
bbs ch wheels haha yup sounds like you got it haha and the black roof lol thanks!!!!!!!
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
This should come in handy. Just a couple simple rules people should abide by if they place a ps request...
Originally Posted by hi its me alec
1.) Clearly state what you want in a clear, concise, and grammatically correct manner.
YES: Hi, I'd like to see these BBS LM's on my car in silver and black. Thanks in advance!
NO: hay guys i would lyke 2 see some sweet 19 inch rims on my car with a candy red lip!
2.) Supply ALL necessary pictures. These include a picture of a.) your car, b.) the wheels (or whatever else) on another car at AS CLOSE OF AN ANGLE AS YOU CAN POSSIBLY FIND TO YOUR PICTURE, and c.) pictures of desired wheel finish or whatever, if applicable.
YES: These BBS LM's on my car in Volk bronze
NO: These wheels on any car, or worse, no pics of wheels whatsoever
3.) Keep in mind that we photoshoppers are spending a lot of our own personal time to help out, so please be grateful for any and every attempt (sans the jokesters.) If you want us to help you, give us a reason to.
...thanks
Last edited by Bimmerchop; 01-05-2010 at 08:14 AM.
Didn't know what color you wanted, hope these will be alright. Let me know if you want a different color. I'll try to do the 701s tonight as well, just need to find the right picture.
its pretty dark compared to mine if you can get anything a little less brown and more tanish gold thatd help... but im not going to complain! your doing a lot already!
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
Hmm, I'm just about to crash but I'll check this thread tomorrow, should have some free time to work on any requests as well so the OP doesn't get overwhelmed haha
its pretty dark compared to mine if you can get anything a little less brown and more tanish gold thatd help... but im not going to complain! your doing a lot already!
I hate being a perfectionist.. until I get tired and lazy
Is this any closer?
Originally Posted by W1CK3D
Hmm, I'm just about to crash but I'll check this thread tomorrow, should have some free time to work on any requests as well so the OP doesn't get overwhelmed haha
ya thats a little better but its still a bit lighter than that ! haha but really anything works!
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
im out for the night ill check up in the morning thanks again! your a champ!
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
Little bit less aggressive, hopefully what you were looking for.
Getting tired here and starting to get lazy. Here's what I got. Will probably work more on it tomorrow. Not sure how much I can improve.. my photoshop skills are limited
your my hero!!!!!!!!! i had to get back on and check haha :) thanks so much!
Double DIN swap, pioneer avh4000, TONS of suede, 15% tint, Forge 007, apr/vdo, rs4 grille, GIAC chip, Depo ecodes with 55w 5000k HID's, ST Coilovers, 034 street density motor and trans mounts, 034 snub w/ bracket, 034 aluminum subframe bushings, valeo single mass cluth/flywheel setup, new control arms and axles, evo ms CAI, powderoated snazzy stuff, euro trunk, multi colors, Shaved exhaust cuttout with hidden turn down tips (in progress... again)
Although it does look sick slammed What you wanted done in that picture is exactly what I want done to my S4. But first I must repair all that is wrong
Originally Posted by ThatA4T
your my hero!!!!!!!!! i had to get back on and check haha :) thanks so much!
Haha thanks. It's not exactly what I had hoped for.. but if you're happy, I'm happy.
The Photoshop request thread!
, just post up picture(s) of your car and picture(s) of the wheels.
Reply With Quote
Originally Posted by ThatA4T
Bookmarks