Interior Door handle Broke

[Choco]

As the title states my interior door handle on my RS7 C7 broke today and I was wonder if anyone had any resources on how to fix it and if I need the whole assembly or just the handle itself. I have it some what back together, i was able to set the pin back in to hold it so it is usable i just want to make sure I am doing it right. Thanks.

[Vinng86]

Looking at the service manuals, they simply say to replace the whole assembly. It's not technically hard, just pop out the trim piece, unscrew 5 bolts and disconnect any wires/cables.

The handle only comes as a whole assembly from audi though, I believe it's part no. 4G8837020C4PK (right) or 4G8837019C4PK (left). I see it's somewhat pricier ($500) on Canadian Audi parts websites but cheaper (about $150 USD) on others so YMMV

[Audisthesia]

The pull handles themselves are not sold separately, it only comes as the whole assembly. FYI: Be very careful when ordering a replacement, the RS has different door pulls than the A/S


A/S


RS

[esemes]

I have all 4 S6 assemblies (different lever though) if you need internal parts. just sitting around

[Audisthesia]

Lol oh shit i forgot i have them too...

[Choco]

Ya looking at the assembly when i took the door card off, it has to come as one you cant swap out the handle and put it into another one, which makes it hard since the ones from the RS7 are the ones with the space in the middle and the rest are the solid ones. I might have to call my local Audi parts place and ask if there is a different part number for the RS7 ones. Thanks guys for the info and the offer, guess its going to be spending necessary money and not mod and tuning money, sad.

[Choco]

Ya for some reason it wont let me buy parts on the USA site.

[Audisthesia]

Ya looking at the assembly when i took the door card off, it has to come as one you cant swap out the handle and put it into another one, which makes it hard since the ones from the RS7 are the ones with the space in the middle and the rest are the solid ones. I might have to call my local Audi parts place and ask if there is a different part number for the RS7 ones. Thanks guys for the info and the offer, guess its going to be spending necessary money and not mod and tuning money, sad.

Actually, this is where you're wrong. You 100% can swap the handles out. I think my photos above of both handles prove they are removable. You just aren't able to buy only the pull handle, you can only buy the entire assembly.

[Choco]

Oh if that is true then that will save me so much money, i can just use the other handle since it wasn't the handle that broke off it was a little plastic part on the assembly. Shit thanks.

[Audisthesia]

Picture of what broke?