Hello!

My TPMS module (8E0907273A) does not save new IDs of sensors installed in the wheels.
In my case, however, no matter what I do, the module still has the old sensor IDs saved.
Can the 8E0 907 273 A module get stuck?

The new sensors in the wheels are correct. The module comes from another vehicle, I installed a TPMS system at my place.
From what I've read on internet forums, if the sensors were bad, the system should remember their ID as 000000. In my case, however, it does not remember them as 00000, nor does it remember their ID. All the time there are old sensor IDs in the system, so I have an error with communication with the 01521 sensors.

I have no other errors. In the measurement blocks I have the opportunity to check the antenna and everything is correct.