
034Motorsport is proud to formally release Dynamic+ Stage 1+/2+ ECU Performance Software for 2017 - 2020 B9/B9.5 Audi A4/A5/Allroad & Q5 equipped with the 2.0T EA888.3 engine and 2017 - Early 2019 DL382 G1 DSG! Gain up to 111 Horsepower and 133 FT-LB of Torque and experience unrivaled refinement and drivability.
Note: Stage 1+ & Stage 2+ ECU files are included with the purchase of Stage 1 & Stage 2 ECU respectively. Existing 034Motorsport Dynamic+ Tune Customers will have these new files automatically available to them, and only need to purchase the appropriate required hardware to flash these new files!
Stock: 264 HP / 279 TQ
Stage 1/1+ 91: 307 HP / 348 TQ
Stage 1/1+ 93: 334 HP / 370 TQ
Stage 1+ E85: 357 HP / 396 TQ
Stage 2/2+ 91: 315 HP / 354 TQ
Stage 2/2+ 93: 342 HP / 377 TQ
Stage 2+ E85: 366 HP / 404 TQ
Stage 1+ & 2+ requires the 034Motorsport High Pressure Fuel Pump & Vacuum Pump Upgrade Kit to be installed. This fueling upgrade provides the additional fueling headroom needed to run these files.
See the product page for a full, in-depth breakdown of the key optimizations that the 034Motorsport Calibration team implemented in this full tuning bundle.
B9/B9.5 Audi Q5 2.0T Software: https://www.034motorsport.com/034mot...-software.html
Dynamic+ ECU Software is only for 2017 - 2020 EA888.3 2.0T equipped vehicles. If you have a 2021+ vehicle, your vehicle is equipped with a EA888 Gen 4 engine which we do not currently support. Dynamict+ TCU Software is only for 2017 - Early 2019 DL382s, as later models are currently unflashable. ECU Tuning can be run safely on all 2017 - 2020 Models with or without TCU Software.
Bookmarks