Tip-6MT

[brzdy]

i’ve dove through other forums unable to get some for sure answers. pretty elementary on the subject still… what part numbers 01e and 0A3 trans bolt directly to the 2.0T. do some take more mounting fabrication than others? anything helps thank you.


Sent from my iPhone using Tapatalk

[a.four]

I’ve just had an 01E conversion done, I used a kit from Audis4parts.com. Took 3 different driveshafts to get the right length, I think the correct length was 64.25. Other than that the kit had everything I needed aside from wiring instructions.


Sent from my iPhone using Tapatalk

[brzdy]

I’ve just had an 01E conversion done, I used a kit from Audis4parts.com. Took 3 different driveshafts to get the right length, I think the correct length was 64.25. Other than that the kit had everything I needed aside from wiring instructions.


Sent from my iPhone using Tapatalk

seems like a nice kit but i’m budget as they come and i feel like i could for sure source my parts for almost half the price. willing to go through trial and error and more labor than just pay up. college is expensive :/
Mainly i was asking what transmissions do and do not fit. as long as it says 01e or 0A3 it’ll mate the motor?


Sent from my iPhone using Tapatalk

[a.four]

seems like a nice kit but i’m budget as they come and i feel like i could for sure source my parts for almost half the price. willing to go through trial and error and more labor than just pay up. college is expensive :/
Mainly i was asking what transmissions do and do not fit. as long as it says 01e or 0A3 it’ll mate the motor?


Sent from my iPhone using Tapatalk

I would use the kit contents list as a guide, if you choose to go 01E. I’m not certain which bolt up/which do not.


Sent from my iPhone using Tapatalk

[Audibot]

Any reason not to go with an 02X?

[brzdy]

Any reason not to go with an 02X?

nope, unless i can’t find one, i have noticed many 0A3s in my area however.


Sent from my iPhone using Tapatalk

[rollerton]

Can I ask possible dumb question-- I've done swaps on other VAG cars / Audis- why do I see many people saying you need a 'tune' for a manual swap? Some people even sell the ECU with the swap.

Whats going on here....Can you NOT code the ECU / ABS to manual?

[frogspit]

Can I ask possible dumb question-- I've done swaps on other VAG cars / Audis- why do I see many people saying you need a 'tune' for a manual swap? Some people even sell the ECU with the swap.

Whats going on here....Can you NOT code the ECU / ABS to manual?

Yes you can do it all through VCDS

Check this thread
https://www.audizine.com/forum/showthread.php?t=460049


Sent from my iPhone using Audizine

[rollerton]

Yes you can do it all through VCDS

Check this thread
https://www.audizine.com/forum/showthread.php?t=460049


Sent from my iPhone using Audizine

Oh yeah, there it is...same as every swa before it.
I still don't know why I aways see people talking about sending the ECU in for a 'tune' during swap or what that's all about.