Q7 Wheels - 20" OEM Wheelset & 18" ALPHAequipt Command w/32" Falken AT4W tires

[xonetruthcrewx]

I have two wheelsets and I only need one. Which ever set sells, I'll keep the other. I hate having things just sit and rot. Really, that's the only reason for this post. If the 18s sell, I will throw a set of 32" ATs on the factory 20s. I am located in Tehachapi, CA and prefer pickup but may be willing to meet up if time allows.

Note on Q7 wheel fitment... Only the 4M and 4.5M have a 5x112 bolt pattern. The 4L Q7 is 5x130.

First up is the 20" OEM wheels off my 2018 Premium Plus. Gunmetal grey with machined face. Wheels are made by BBS and 20x9 et33. Center bore of 66.5 and bolt pattern of 5x112. Continental Crosscontact LX Sport 285/45r20 tires are installed. Three of the tires have 60% tread and one has 70% tread. Expensive tires and lots of life left in them. Zero curb rash, wheels are in excellent condition. If interested and you want more pics, shoot me a message. Asking price is 1,100.





Next up is the 18" ALPHAequipt wheels with Falken Wildpeak AT4W tires. Wheels are 18x9 et25. Hubcentric rings for the Q7 and a bolt pattern of 5x112. Load rating for these wheels is 2650lbs. Tires are Falken Wildpeak AT4Ws in LT265/65r18, load range E. The tires when brand new have a tread depth of 17/32nds and are currently sitting at 15-16/32nds. I've had these on the Q7 for 5k miles. More pics are available upon request. Asking price is 1,850.










Just a note on the above wheelset... I did install H&R Adventure springs on my Q7 giving it 1" of lift all around. I think these will fit on stock suspension without rubbing but DO NOT hold me to that. You will need new wheel bolts to run these wheels as they use a cone seat. I did a stud conversion on my Q7 so I do not have bolts to pass along. You're more than welcome to the cone seat nuts I have if you too have a stud conversion.

[xonetruthcrewx]

Bump.