Audizine - An Automotive Enthusiast Community

Results 1 to 3 of 3
  1. #1
    Senior Member Three Rings
    Join Date
    Dec 30 2013
    AZ Member #
    137488
    Location
    Australia

    Ross Tech VCDS - Cannot get past initial 'Test'

    Guest-only advertisement. Register or Log In now!
    Whilst trying to connect VCDS to my car, when you initially download and open the software and go to Options > Test, it just freezes on that screen and I can't do anything else.

    Any ideas?

  2. #2
    Senior Member Three Rings
    Join Date
    Dec 30 2013
    AZ Member #
    137488
    Location
    Australia

    For future reference, I found the solution:

    I managed to find the device which is causing the issues in combination with VCDS on Windows 11.

    In my case disabling the "HID sensor collection V2" resolved my problems related to VCDS not working / crashing when HEX-V2 interface is being used.

    I needed to disable the following devices:
    HID\VID_8087&PID_0AC2\6&1E814A59&0&0000
    HID\VID_8087&PID_0AC2\6&859E19C&0&0000


  3. #3
    Veteran Member Four Rings
    Join Date
    Feb 06 2013
    AZ Member #
    108995
    Location
    WV

    If your abs is not working unplug the pump. When I would flash my ECU, try to pull codes, etc it will not do it because the diagnostics run through the abs pump.
    If you can read this thank a teacher, since its English thank a veteran...

    Audi make a great car, but their heater cores are, well $h!t.....

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.