$600 ECS Stainless Cat Back Valved & Resonated Exhaust Black Tips, C7.5 A6/A7
Original price was $1,850, I am selling for $600. The price is right because I want it gone. It's in perfect shape. I am selling this for CASH and LOCAL pickup only. Located in Peachtree City, Georgia 30276. The exhaust was professionally installed and then professionally removed by GMP Performance in Peachtree City, Georgia, and the exhaust has <50 miles on it. It's effectively new. I am selling because the noise was interfering with marital bliss. You can see in the pictures that I did do a fiberglass wrap on the mufflers in a desperate attempt to reduce the decibels but it wasn't enough. Those can be easily removed. Setup includes optional mid resonator and smaller sized black tips. Please note that the Billet Boost Tap Kit is NOT included but can be purchased from ECS for $47. Everything else is included just as shipped from ECS. ECS provides a lifetime warranty.
Images here:
https://imgur.com/a/3qVVc0z (can't figure out how to load images on this forum)
Manufacturer info here:
https://www.ecstuning.com/b-ecs-part...dk/?pdk=AQINAQ
Enjoy your C7.5 A6/A7 with the most engaging, race-inspired, performance-valved exhaust system. Intoxicating exhaust notes fuel your desire to push your engine to its limits with every ounce of power and every engine revolution. Experience your driving passion with our ECS Valved Exhaust System allows for MMI control and operation of the valves. The full exhaust system is made from high quality brushed T304 stainless steel with TIG welded joints for an exceptional look and durability. Exhaust gases are channeled through the integrated x-pipe, your choice of either a resonator or a resonator delete section, and then to the 3 chamber, in house designed mufflers. With this system, you, the driver, are in control of where the exhaust gases go from here. In normal, comfortable driving conditions, the valve remains closed and exhaust gases are directed through the channels of the mufflers, where sound reduction takes place. Once the exhaust valved are opened it unleashes a straight-through, raw, unedited exhaust symphony. Each system is available with your choice of either chrome, black chrome, carbon fiber, burnt titanium or matte titanium clamp-on, "pivoting" exhaust tips that accentuate this expertly assembled exhaust system with a perfect finish. With clamps securing each tube in position and allowing multiple degrees of rotation in combination with our ECS Swivel Exhaust Tips, you have the ability to fine-tune the location of each component.When paired with our standards of quality and design requirements here at ECS Tuning, we can provide your C7 A6/A7 a perfect blend of performance and an interactive driving experience. Through multiple design iterations and stringent product testing, we have engineered our exhaust system to not only free up horsepower but to provide trouble-free installation. Our ECS Valved Exhaust System was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. Features:
2.75” (70mm) 304SS CNC mandrel bent construction, fully TIG welded with brushed finish.
2.75” (70mm) x 1.5mm wall downpipes with interlock flex sections for improved durability
2.75” (70mm) x 1.25mm wall midpipe and axle back sections for reduced weight.
Integrated X-pipe in center of exhaust
Optional center resonator for more refined sound
Utilizes factory exhaust valve motors to integrate into the OE valve controller
Allows for MMI control and operation of the valves
Quad tip outlets with 3.5” or 4” ECS swivel tips (both options fit in factory valence)
ECS designed muffler and resonator internals with stainless steel wool packing
Utilizes factory exhaust hangers throughout system
All required gaskets, hardware, and clamps included with kit
This Part Fits the Following Vehicles
Make Model Submodel Engine
Audi** *A7** *C7** *3.0T
Audi** *C7 A6** *FWD** *V6 3.0T
Audi** *C7 A6** *Quattro** *V6 3.0T
This Product Is Covered By Our Lifetime Replacement Program Products protected by our Lifetime Replacement Program are covered for as long as you own the product, no need to worry about an expiration date. Purchase your products and enjoy some worry-free motoring, knowing we've got you covered.
Reply With Quote
Bookmarks