Subwoofer Plug and Play Harness - Help Needed

[iampraneel]

Hey folks! Im getting some request to make my subwoofer plug and play harness for the B8/8.5 Q5/SQ5. Someone sent me a pic of the connectors going to the OEM sub and the one on the OEM sub for a B8.5 with B&O. I have the parts on order to make some and will have it up in the classified once I verify.

I’m wondering if it’s the same connectors for the non B&O model. Can someone with a B8/8.5 without B&O verify for me?






Link to the harness I offer for the B9/9.5.

https://www.audizine.com/forum/showthread.php?t=945999

[Smac770]

The only harness plug listed for the B8.0 Q5 subwoofer is 1J0972923. So likely the same regardless of standard or B&O system. While the plug p/n is also listed for B8.5, can't confirm the application since Audi decided to no longer document such stuff for B8.5.

[iampraneel]

The only harness plug listed for the B8.0 Q5 subwoofer is 1J0972923. So likely the same regardless of standard or B&O system. While the plug p/n is also listed for B8.5, can't confirm the application since Audi decided to no longer document such stuff for B8.5.

Thank you. Do you have something which shows which wire is positive and negative?

[Smac770]

I'm on the road now, so don't have any of that with me. It may or may not be marked in the wiring diagrams document. Easy way is just put a 9V on the sub terminals, the + applied to one terminal will make it move outward, that's the + wire. The + applied to the other terminal will make it move inward, that's the - wire. But given the amp does full dsp and could be doing anything with phase, just always make sure the wire that was on pin 1 of the connector is on pin 1 of the connector.

[fallingreason]

I have a 2013 without B&O and the connector shape look the same, but the plastic molding is slightly different. My wires are also different colors (yellow/white and yellow/brown on vehicle side) I took pictures and can send them, getting a message they are too big to attach here.

Interested in a harness if they get made for us in the B8's!

[iampraneel]

I have a 2013 without B&O and the connector shape look the same, but the plastic molding is slightly different. My wires are also different colors (yellow/white and yellow/brown on vehicle side) I took pictures and can send them, getting a message they are too big to attach here.

Interested in a harness if they get made for us in the B8's!

Thank you. Testing with a couple of folks who have a B8.

[iampraneel]

For those interested. Here they are.

https://www.audizine.com/forum/showt...7#post15128027