BKN V6 3.0 TDI, head bolt specs?

[nachofly]

Hello, just like the title says, I've found info about the head bolts V6 but not for the TDI version, anyone kind enough to gave some leads, or where to get the manual for bolt pattern, torque and proper procedures?.

Kind Regards

Tighten cylinder head bolts in 3 stages in the tightening sequence shown as follows:
Using torque wrench, tighten to 40 Nm.
With Torx key, 90 degree ( 1 / 4 turn) additional turn.
With Torx key, 90 degree ( 1 / 4 turn) additional turn

Just to confirm