Diet A6 Drag Build "Ruby"

[dspl1236]

In 2023 I picked up a cheap 2012 3.0T A6 from down the street. Wife already named it Ruby. Had a cracked engine block from water/ice expansion. Broke the PCV as well. Drove it home with the throttle body unplugged... Little JB Weld on the block and a good used PCV swapped in, and she runs and holds temp.

I have since swapped the seats, HVAC Head unit, supercharger, driver fender, front bumper and the LED headlights to my daily 2013.

My "plan":
- 3.2 FSI block for the rebuild
- CTUB heads
- 84.5mm sleeves for 3.1T
- CTUB rods - re-bushed for 20mm pins
- CALA pistons
- CREC supercharger with CTUB innards.... no clutch, bigger coolers.
- Separated chilled water system
- CTUB ECU tune to be determined
- 14point7 SLC2 w/LSU 4.9 wideband
- Supplementary fueling ecu
- CREC Intake Manifolds with MPI
- TCU tune to be determined
- Bigger supercharger later, but already in hand.
- DI injectors to be determined
- MPI injectors to be determined
- Interior removal









3.2 delivered








It's cool to say I am crazy. I am. Also building 3 cars at once