Stg2 B8.5 with very low mileage and a dead clutch

[silverf0x]

Hi, I haven't posted here in a while because, well, my car has just been sitting there for the last few years, doing maybe 1k mile per year for the last few..

Been running Unitronic Stg 2 kit since almost day 1 (7-8 years ago wow..) the car now sits at a bit under 23k miles

I always knew the stuck clutch could handle so much but here we are, apparently, well it slips in 5th or 6th so I guess it's on its way out.

Since I'm out of touch, I need you guy's experience on a clutch replacement that could:

1) Handle Unitronic Stg3

2) Feels as close to stock as possible

3) Available in Canada (Quebec)

4) Preferably under 3500$ USD (installed)

Any tips & tricks is greatly appreciated


Old pic for clout (tho the car didnt change much):

[apeck240]

Hi, I haven't posted here in a while because, well, my car has just been sitting there for the last few years, doing maybe 1k mile per year for the last few..

Been running Unitronic Stg 2 kit since almost day 1 (7-8 years ago wow..) the car now sits at a bit under 23k miles

I always knew the stuck clutch could handle so much but here we are, apparently, well it slips in 5th or 6th so I guess it's on its way out.

Since I'm out of touch, I need you guy's experience on a clutch replacement that could:

1) Handle Unitronic Stg3

2) Feels as close to stock as possible

3) Available in Canada (Quebec)

4) Preferably under 3500$ USD (installed)

Any tips & tricks is greatly appreciated


Old pic for clout (tho the car didnt change much):

I absolutely love my clutch setup, spec stage 3+ and ecs aluminum fw. Will hold about double that, and feels stock. About 2k in parts so leaves you a good bit for labor

[silverf0x]

I absolutely love my clutch setup, spec stage 3+ and ecs aluminum fw. Will hold about double that, and feels stock. About 2k in parts so leaves you a good bit for labor

What's the feel like? How hard is it (say) in traffic?

[RockJGC]

I absolutely love my clutch setup, spec stage 3+ and ecs aluminum fw. Will hold about double that, and feels stock. About 2k in parts so leaves you a good bit for labor

Any noise with that flywheel? I always hear people complaining about noise when they ditch the dual-mass flywheel.

[apeck240]

Any noise with that flywheel? I always hear people complaining about noise when they ditch the dual-mass flywheel.

No noise or chatter at all

[bb-tt]

I absolutely love my clutch setup, spec stage 3+ and ecs aluminum fw. Will hold about double that, and feels stock. About 2k in parts so leaves you a good bit for labor

What's the feel like? How hard is it (say) in traffic?

??

[Allowencer]

Ringer Racing or go home. Might have to drive to the states to get it done for a good price. Or you can get a clutch from them and have someone install it.

I went with the stage 5. I'm done messing around lol

Sent from my SM-N976V using Audizine Forum mobile app

[silverf0x]

??

Thanks didn't notice it

[A4B8 2.0tfsi]

Sachs performance, clutch and flywheel. A little bit harder clutch pedal, but thats kind of understandable considering stock is a feather.

[silverf0x]

Sachs performance, clutch and flywheel. A little bit harder clutch pedal, but thats kind of understandable considering stock is a feather.

This one?

https://www.sachsperformance.com/en/...h-3000950918-s

[apeck240]

This one?

https://www.sachsperformance.com/en/...h-3000950918-s

15% higher than stock is quite a waste of time

[A4B8 2.0tfsi]

Sorry. Didn't notice you have a S4. Disregard my suggestion. Have no idea what a S4 clutch should be or feel.

This is my

https://www.sachsperformance.com/en/...-quattro-155kw

[RockJGC]

Yeah, it might be a better idea to post this in the S4 section to get some answers.