034 Motorsport Density Line Adjustable Upper Control Arm kit B6/B7

[BumblebVR6]

Fairly new outer ends and NLA inner spherical bearings. Raised my car so no longer need. Have some spare service parts as well as hardware I’ve sourced that I’ll include. $450 shipped to the lower 48.




Sent from my iPhone using Tapatalk

[BumblebVR6]

TTT

[BumblebVR6]

Price drop bump.

[Mike Tries]

Can these be used to add more negative camber? I understand that the intent was to cancel out the extra negative camber gained from lowering the car.

[BumblebVR6]

Can these be used to add more negative camber? I understand that the intent was to cancel out the extra negative camber gained from lowering the car.

Yes, not sure how much, but if you look at the amount of exposed threads, you can get an idea. I'm not sure how much 1/36" is as far as a turn of the outer heim is, but that equals .1 degree according to 034. I was sitting at around -1 or 1.5 at the settings I have them at with a 2" drop or so. Should be able to get another degree or more out of them I'd imagine.