Incoming Rare Items for your B5 S4/RS4

[PwrWgn]

Rear upper and lower control arms (both S4 and RS4 spec)

Whats the difference?

[RMode]

Whats the difference?

Uppers are the same, lowers, RS has different bushings


Sent from my iPhone using Tapatalk

[Tec_Nine]

So awesome that you're able to get new parts for these cars. Looked over the list and may have to get some of these just to have them.

[RMode]

Morning everyone!

Lots of stuff coming and and going out, and I haven’t updated the thread in a while. I’ll get back to it asap

I have a brand new set of genuine BW K04s available. Factory fresh, not reman’d, and most importantly, genuine. There is no more reliable turbo made for these cars. DM with full address for a prompt reply with pricing including shipping.

I also am now a Wagner dealer, and pairing these with some Wagner IC’s is a proven, outstanding combo. I’ve had it on my own car for 3.5 years and 80K miles.

I’ve also got a bunch of various coolant hoses in stock from THE-Tuner. Lmk what you need!

Lots more new old stock arriving soon too! DM either your needs.

Thank you everyone for the continued support and enthusiasm for these special cars!


Sent from my iPhone using Tapatalk

[RMode]

Handful of odds and ends before a new stocking order arrives


1. Brand new set of factory Borg Warner K04s. Not rebuilt. These can’t currently be ordered from BW at all. In stock and ready to go. DM with your full, complete address for total to your door. Worldwide shipping available.

2. One genuine set of original engine covers. 3 piece kit. New old stock

3. Cowl hardware back in stock - only a few sets available !

4. Various replacement coolant hoses from THETuner, including the hose that runs from the rear crossover hard pipe (at the temp sensor) to the t fitting off the expansion tank ($79); also have the hose from the thermostat to front cross pipe ($32). In addition, the hose that runs from behind the timing belt heat exchanger/oil filter housing ($34).

5. THETuner f hose - for early build S4’s - $39

6. THETuner heavy duty manual timing belt tensioner - priced at $159 shipped in the lower 48

7. 3 button fobs - technically for the avant but works for sedan too. In addition, I have the flippable key blade half too (sold separately)

8. One set of front door seals with light gray fabric. Fits all sedan and avant. $199 shipped in the lower 48.

9. One classic rear trunk emblem currently on hand. New old stock.

10. Several new style rear trunk emblems

11. New old stock rear trunk rings for sedan or avant.

DM to order! PayPal or Venmo for payment. Worldwide shipping available.


Sent from my iPhone using Tapatalk

[RMode]

Ok all, to continue the Black Friday/Cyber Monday deals, here’s what we are going to do. See the list below, and please read the descriptions!

I’ll update here with my own stock as time allows through the weekend. Just be a bit patient, as I’ve also got a family and we’ve got plans through the weekend with people visiting from all over the country and beyond! DM is always the most efficient way, or if you’ve got my number, text me. As always, if I don’t have it on hand, and it’s gettable, I’ll get it, and, it will be on sale!

1. All Wagner products: 10% off AND free shipping in the lower 48 states

2. Bilstein PSS9 coil overs for the B5 A4/S4/RS4: $1908 SHIPPED in the lower 48. I have 5 only at this price. ETA to arrive to you is first half of January.

3. All THE-Tuner Products - 10% off usual pricing and FREE SHIPPING in the lower 48 states. Applies to in stock and special order items. Everything in the catalog. In stock items will ship Monday. Special order items will ship mid January to you, as they are taking December off to update and improve their computer and inventory systems.

4. 15% off usual pricing on ALL Audi Tradition parts. Applies to all in stock (with me) AND special order items! The whole schebang!

Any other special requests, just let me know!

Have a great holiday everyone, and please stay safe!


Sent from my iPhone using Tapatalk

[RMode]

Ends Monday!


Sent from my iPhone using Tapatalk

[RMode]

Got a few cupholders that just arrived back into stock !



Edit, and just like that, all sold out now


Sent from my iPhone using Tapatalk

[RMode]

More carbon goodies landed a while ago, and I finally finished unpacking and filling backorders

Some pics for everyone













Sent from my iPhone using Tapatalk

[eurogz]

That rain tray looks awesome! Last one I tried was junk lol.


Sent from my iPhone using Audizine Forum

[RMode]

That rain tray looks awesome! Last one I tried was junk lol.


Sent from my iPhone using Audizine Forum

I bet I can guess who made it ….


Sent from my iPhone using Tapatalk

[RMode]

That rain tray looks awesome! Last one I tried was junk lol.


Sent from my iPhone using Audizine Forum

Some more pics

Includes the battery cover






Sent from my iPhone using Tapatalk

[Jayblack9397]

B pillars look great compared to what’s on the market.


Sent from my iPhone using Tapatalk

[RMode]

B pillars look great compared to what’s on the market.


Sent from my iPhone using Tapatalk

They are complete replacements, and perfect fit. I have them on my car. And a nice touch to include the triangles too for rear doors





Sent from my iPhone using Tapatalk

[RMode]

RS4 clutches now back in stock!

$369





Sent from my iPhone using Tapatalk

[RMode]

TDI 5th and 6th gears for a very good friend and client




Sent from my iPhone using Tapatalk

[zipdoa]

Can you get the TTE S4 Intercooler to RS4 Bi-Pipe hose kit?

[RMode]

Can you get the TTE S4 Intercooler to RS4 Bi-Pipe hose kit?

TTE does not make any intercoolers, so not sure which item(s) you would need

[RMode]

Selling these ER IC’s on behalf of a friend and client who just upgraded.







Sent from my iPhone using Tapatalk

[RMode]

RS4 clutches now back in stock!

$369





Sent from my iPhone using Tapatalk

A dozen clutches sent in the last month. More arriving today!


Sent from my iPhone using Tapatalk

[RMode]

Couple things from THE-Tuner headed out today to some great clients

[RMode]

Also have a pair of the INDOOR car covers in stock, ready to go! Black with red sport logo

Priced at $399 shipped in the lower 48. International shipping also available. These were designed by me to specifically fit both B5 Sedan and Avant, as well as widebody and standard body. Super stretchy outer material, dust and dirt repellent, with a soft fleece inner lay which will not mar the paint. Best part - fully machine washable!






First 3 pics are shown on 2 different customer and friends cars - both are widebody avants. Last picture is shown on my narrow body sedan

[quadruple ring]

Can’t wait for my tuner goodies! Thanks for all you do sir! -matt


Sent from my iPhone using Audizine Forum

[RMode]

Can’t wait for my tuner goodies! Thanks for all you do sir! -matt


Sent from my iPhone using Audizine Forum

Happy to help my man ! I can’t wait to see the net result!


Sent from my iPhone using Tapatalk

[bakedziti]

Long shot and I’ll probably butcher the description but can you source the breather hose that attaches to the y pipe with a round pressure ring type clip?

In reassembling my sedan last weekend in the cold temps I cracked the corrugated portion of the hose. Let me know if you need an image. Thank you!

Edit: This hose

[RMode]

Long shot and I’ll probably butcher the description but can you source the breather hose that attaches to the y pipe with a round pressure ring type clip?

In reassembling my sedan last weekend in the cold temps I cracked the corrugated portion of the hose. Let me know if you need an image. Thank you!

Edit: This hose

The angled hose to the prv? That’s sold as part of the entire spider hose assembly, which yes, I can get. If just replacing the hose itself, most people will just replace it with some proper vacuum hose (not heater hose). But if you want it to be 100% factory-original, then sadly, its a whole spider hose assembly


Sent from my iPhone using Tapatalk

[bakedziti]

The angled hose to the prv? That’s sold as part of the entire spider hose assembly, which yes, I can get. If just replacing the hose itself, most people will just replace it with some proper vacuum hose (not heater hose). But if you want it to be 100% factory-original, then sadly, its a whole spider hose assembly

Sorry, I should have specified which hose. You got the right one and I appreciate the information. How much does a spider hose cost through you? Thanks!

[RMode]

Sorry, I should have specified which hose. You got the right one and I appreciate the information. How much does a spider hose cost through you? Thanks!

Dm me the year, and vin assuming it’s the original engine.


Sent from my iPhone using Tapatalk

[RMode]

Couple things from THE-Tuner headed out today to some great clients

For those wanting any of THE-Tuner items, drop me a line ;) another order going in, and the intake manifolds are going quickly again (as are their exhaust manifolds, which are works of art)


Sent from my iPhone using Tapatalk

[RMode]

Update 3/12/25:

3 spots left

After a bunch of requests, I’m going to host a group buy for THE-Tuner exhaust manifolds for the S4/RS4. A perfect compliment to your build.

These manifolds are a cast from 1.4848. Thanks to their CFD and CFD, this design is much more consistent than the stock manifolds.

Turbos remain in their oem position, and both left and right manifolds can be used with the factory EGT sensors.

This group buy runs today through 3/21, and in your hands the second week of April. I am limiting this to a maximum of 8 people only.

If you were to order these usually, after PayPal and shipping, duties and taxes, you could expect to pay right around $2400 for the base manifold kit, or $3100 if you opted for their thermal insulation.

I am offering this for $1980 including shipping in the lower 48 states for the base manifolds, or $2525 including shipping including the thermal insulation. I will include, at no charge, a pair of genuine Audi gaskets from the heads to the manifolds. Payment is due in full by 3/21 so things can move as scheduled. If someone needs to do a deposit, or break payments up, just shoot me a message to organize.

For those interested, the insulation is also made of 1.4828 stainless, and is wrapped and welded. Heat resistant to 2192F.

Payment is via PayPal goods and services or Venmo. I do not charge extra for either, as I absorb the fees for each.

Optionally (and recommended +$37.00) is THE-Tuner reshaped coolant hose to the expansion tank. This hose was designed to work in conjunction with these manifolds to route it away, and keep things nice and tidy without zip ties etc. Also available are genuine Audi studs and nuts for the manifolds. This full kit runs $59.00. It’s highly advised that you replace these anytime the manifolds are removed. I know a lot of people don’t, but never-the-less, it’s good to be safe.

For shipping to Canada, DM me your full address please.

Any questions, please let me know.







Sent from my iPhone using Tapatalk

[RMode]

A bunch headed out today

THE-Tuner AOS


Some factory correct camber bolts (toe available too!)



THE-Tuner high flow oil pump with a new cog gear




THE-Tuner cast Y and some other stuff too that I didn’t happen to grab pics of :)


Sent from my iPhone using Tapatalk

[RMode]

Update 3/12/25:

3 spots left

After a bunch of requests, I’m going to host a group buy for THE-Tuner exhaust manifolds for the S4/RS4. A perfect compliment to your build.

These manifolds are a cast from 1.4848. Thanks to their CFD and CFD, this design is much more consistent than the stock manifolds.

Turbos remain in their oem position, and both left and right manifolds can be used with the factory EGT sensors.

This group buy runs today through 3/21, and in your hands the second week of April. I am limiting this to a maximum of 8 people only.

If you were to order these usually, after PayPal and shipping, duties and taxes, you could expect to pay right around $2400 for the base manifold kit, or $3100 if you opted for their thermal insulation.

I am offering this for $1980 including shipping in the lower 48 states for the base manifolds, or $2525 including shipping including the thermal insulation. I will include, at no charge, a pair of genuine Audi gaskets from the heads to the manifolds. Payment is due in full by 3/21 so things can move as scheduled. If someone needs to do a deposit, or break payments up, just shoot me a message to organize.

For those interested, the insulation is also made of 1.4828 stainless, and is wrapped and welded. Heat resistant to 2192F.

Payment is via PayPal goods and services or Venmo. I do not charge extra for either, as I absorb the fees for each.

Optionally (and recommended +$37.00) is THE-Tuner reshaped coolant hose to the expansion tank. This hose was designed to work in conjunction with these manifolds to route it away, and keep things nice and tidy without zip ties etc. Also available are genuine Audi studs and nuts for the manifolds. This full kit runs $59.00. It’s highly advised that you replace these anytime the manifolds are removed. I know a lot of people don’t, but never-the-less, it’s good to be safe.

For shipping to Canada, DM me your full address please.

Any questions, please let me know.







Sent from my iPhone using Tapatalk

Down to just 2 spots left!

Ends this Friday, 3/21, or when these 2 spots are filled, whichever occurs first.

Last chance to save huge on these.


Sent from my iPhone using Tapatalk

[RMode]

Down to just 2 spots left!

Ends this Friday, 3/21, or when these 2 spots are filled, whichever occurs first.

Last chance to save huge on these.


Sent from my iPhone using Tapatalk

Down to 1 spot left


Sent from my iPhone using Tapatalk

[RMode]

Down to 1 spot left


Sent from my iPhone using Tapatalk

All filled, and this is now closed

Thanks all!

[Dan92H]

Do you still have any trunk hoses or B Pillars left?

[RMode]

Do you still have any trunk hoses or B Pillars left?

Trunk hoses are totally done now

Which specific b pillars?


Sent from my iPhone using Tapatalk

[Dan92H]

Trunk hoses are totally done now

Which specific b pillars?


Sent from my iPhone using Tapatalk

The Carbon Fiber ones

[RMode]

The Carbon Fiber ones

Sedan or avant? Gloss or matte clear?


Sent from my iPhone using Tapatalk

[Dan92H]

Sedan or avant? Gloss or matte clear?


Sent from my iPhone using Tapatalk

Gloss and sedan, inboxed you

[RMode]

Unpacked and shipping a bunch of carbon yesterday from my partners at RS Carbon. These are all made in Europe, and I’m their distributor in the US.

I’ve posted elsewhere in this thread, but they offer a selection of parts specific for the facelift B5 A4/S4 and RS4.

Their selection includes:

B pillar sets (4 piece) for sedan and (6 piece) for avant

As found on my car









Full carbon rain train with battery cover (wait till I show you the matte clear version later this weekend, it’s really stunning!). Before anyone asks, no, there are no cowls. Why? Incredibly difficult to make, and the take rate would be so low and development costs so high, the retail cost would be astronomical as a result.






Dash end caps. Sorry, they don’t offer interior trim pieces. Again, incredibly expensive to make, which is why skinned versions are popular.

Power steering cover for 01-02 cars



Airbox lid cover: fits oem, RS4 and THE-Tuner airbox







Full carbon door sill sets for both sedan and avant








Mirror covers, once again, as found on my car






OEM Audi Wingback Seat backs- some pics I snapped yesterday for a set that came in for one of THE nicest, well sorted cars anywhere out there




And for those who want to take the full real deal carbon to the next level, I’ve got a special announcement coming soon!

———————————————————————————


Have a set of the 6 piece b pillars in stock ready to go. Includes exterior b pillars, c pillars and the rear glass triangles too. Finished in gloss clear. Yea, an actual clear coat, not just relying on the resin like so many others do.

These are full prepeg carbon and fit exactly like oem. The weave is perfect. These aren’t some cheap overlay, or wrap, or skin, or hydro-dipped. It’s a full carbon construction.

Priced at $699 shipped for the complete set.








DM to order any of the above. I have another order going on next week and things get spoken for very, very quickly.


Sent from my iPhone using Tapatalk