snub mount question

[Ray1031]

I replaced my snub mount 5 years ago with the polyurethane one. Looking at the engine today the mount looks fine however it looks as though its moving out of place if that makes any sense, has anyone experienced this?

[Jayz691]

Pics? What ya mean?

Sent from my LM-G710VM using Audizine Forum mobile app

[Ray1031]

Here’s a picture and hopefully you can see hit it seems to be coming/sliding out of the frame. I had surgery in a foot and I can’t get under the car yet to see what the heck it’s going on.


Sent from my iPhone using Tapatalk

[steve53mg]

Can't really make heads or tails out of the pic

[Ray1031]

If you look closely at the picture, it seems to be slipping out


Sent from my iPhone using Tapatalk

[Theiceman]

so is that the snub mount and engine moving towards the back of the car ? or the front of the car moving forward?? thats wht it kinda looks like from the pic, ever had the front end off since installing ? i kind of see what you mean but i cant remember where it sits on my car.

[Ray1031]

yes it seems as it's moving towards the back of the car...

[Theiceman]

thats weird..

[Jayz691]

Just remove the 3 Allen's on the bracket, and inspect the mount. There are 2 kinds, ones with round hole, or D shaped hole. B7 used the D shaped hole. Either the wrong one was used, it didn't have a lip on the inside as a stopper(when pushing it on), or it cracked and is walking further onto the bracket. Think thise are the 3 most likely things going on.

Sent from my LM-G710VM using Audizine Forum mobile app

[Ray1031]

It’s cracked and needs replacing, ordering it later today


Sent from my iPhone using Tapatalk

[Theiceman]

that would make sense with the " harder" poly being used.

[Jayz691]

It’s cracked and needs replacing, ordering it later today


Sent from my iPhone using Tapatalk

Did ya order one? I have a powerflex yellow I'm not using, like new..

Sent from my LM-G710VM using Audizine Forum mobile app