2005 Ebony Pearl K04 Allroad - Lots of Very Low Mileage Mods

[_Sam]

I bought this car for $1,200 three years ago and have since dumped way too much money into it. It has never run correctly, and I've only been able to drive about 100 miles since I installed all these parts. Unfortunately, I can no longer afford to wrench on this car and am forced to part it out.

Modifications include:

• 01E w/ JHM rear bias center diff. - $1,000
• Bosch EV14 1000cc injectors - $500
• Techtonics Tuning exhaust - $1,000
• APR bi-pipe - SOLD
• OEM RS4 Y-pipe - SOLD
• OEM RS4 "lobster claws" - SOLD
• OEM RS4 turbo inlets - SOLD
• 034 3" downpipes - SOLD
• 034 street density transmission mounts - SOLD
• 034 street density motor mounts - SOLD
• Evolution Racewerks intercoolers - $700
• EPL MAF housing - $150
• Bilstein PSS9 coilovers - SOLD
• Hotchkis RS6 rear sway bar - SOLD
• ACT 6-puck clutch and streetlight single-mass flywheel - $1,000
• Aquamist methanol injection kit - $500
• OEM C5 RS6 Seats (front and rear) with sedan side bolsters - $1,000
• OEM Borg Warner K04 Turbos with Turbo Rebuild UK "enhanced" billet CHRA's - $1,800
• Black Forest Industries GS2 Leather shift knob - $100
• Brand new, never installed Thor aluminum Allroad skid plate - SOLD
• Walbro 450 Fuel Pump - $50
• Forge diverter valves - SOLD
• AWE Drivetrain Stabilizer - $120

Nearly all of these parts are brand new. Until a few days ago the car never made it out of my neighborhood. I've driven from Boulder to Denver and back twice.

Every other part on the car is available and I have additional Audi bits in storage including black alcantara C5 headliner parts and RS6 trim. The chassis has 222k miles and is completely rust free. Feel free to make offers on parts.

[blairdude]

Does the rear sway bar you have fit with the factory air suspension stuff?

[jbain2]

You want to sell the whole car?


Sent from my iPhone using Audizine

[_Sam]

Yes, the rear sway bar bolts right in without issue. My stock air compressor and all associated connections are still installed.

If you'd like to buy the whole car, feel free to make an offer. However, I listed this as a part-out knowing I could recoup far more in parts. Your offer will have to be something close to what I could recover from parting out. That said, I trust this car could drive across the country as-is. This is a rare factory 6-speed car, especially in this color and I would love for someone to finish this project. It also has a very nice Alpine stereo in it (speakers, tweeters, reciever).

[_Sam]

Y-pipe, bi-pipe, and lobster claws have been sold.

[_Sam]

Coilovers have been sold.

[FiveforBiting]

I am looking for a pair of stock Allroad top hat brackets if you still have them.

[_Sam]

I am looking for a pair of stock Allroad top hat brackets if you still have them.

Can you clarify? I don't have any stock allroad top hats, like what comes on top of the stock air springs (has 6 threaded bolt holes). I do have a few more sets of the custom adapters that will adapt an A6 tophat to the Allroad upper control arm mount. I also have one set of Allroad upper control arm mounts (the thing the stock air bags bolt to). I get confused with all the little parts, sorry.

[scaryfast77]

Sent a private message, looking for a few parts if available. Thanks!

[_Sam]

Forge diverter valves have been sold. I found an AWE drivetrain stabilizer in my garage.

[Kevo1288]

I really want these seats badly, I wonder how much shipping would be , also are door cards still available?

[anarchy0392]

Pm sent about mounts. I also forgot to ask if they come with the 10mm hardware.

[R3216vt]

Pm sent

[_Sam]

Motor mounts, transmission mounts, sway bar, skid plate, and turbo inlets are sold

[_Sam]

I really want these seats badly, I wonder how much shipping would be , also are door cards still available?

Door cards are still available, but I don't think they're RS6 door cards. I took them from an A6 I bought to build this AR. One has an RS6 door handle, but the others do not.

[RoninR6]

Ill take the AWE drivetrain stabilizer.