Turbo install on a TTRS

[Shhmaudi]

I have this turbo kit sitting on the shelf and I am really considering installing it. Does anyone have a install guide or pertinent tips. I have found some mk3 daza stuff on YouTube but nothing on the mk2, are they pretty much the same?

I have heard some remove it from the bottom after dropping the subframe.

OR

Some remove the valve cover and remove thru the top

Any tips would be great. I’m pretty mechanically inclined building plenty of b5 s4s and a few other cars so not really worried.. More of a direction of what’s easier/ tips. I have access to a lift but rather do it at my leisure on jackstands in my garage.

[mc_hotmail]

Lots of steps and you cannot see nuts and bolts you need to release. I suggest you get a copy of ElsaWin manual.

I have heard some remove it from the bottom after dropping the subframe.

No.

Some remove the valve cover ...

No, if you referred to the aluminum piece beneath the oil cap and PCV -- it's considered a part of the cylinder head. There is no valve cover and gasket like those in B7.

You remove the turbo charger from the top, leaving its coolant and oil lines attached to the engine block. I did it with engine out, so it's not gonna be easy for you. Take your time. Don't let your catalytic converter drop.

[Shhmaudi]

Can I get the ElsaWin manual online as a pdf?

[mc_hotmail]

No, it's an interactive software runs in Windows.

[Shhmaudi]

No, it's an interactive software runs in Windows.

Exactly what I am looking for, thank you for the help.

[Shhmaudi]

https://drive.google.com/drive/mobil...13&direction=a

Posting this to help others in the future 🤙

[mc_hotmail]

I just noticed that you have a 2013 TTRS -- 2.5 inline five turbo. The 2007 manual only covers 2.0T and 3.2 VR6, not your 2.5.

Never mind. The engine code CEPB is correct for 2013. Your manual is organized differently than mine.

[AntthonyRS]

https://drive.google.com/drive/mobil...13&direction=a

Posting this to help others in the future 🤙

Legend