Afternoon everyone have a 2014 SQ5 that’s recently has been having a/c issues and home link issues. Plugged into it and has A/c pressure sensor implausible signal fault 0265 if my memory serves me right. For the sensor that is in the condenser. While I was waiting for a sensor. Checked the fuse that is for the A/C and homelink on the drivers side door Jam. Good. Checked connections and sensor and homelink module good. The car dried out over a day or two everything works perfectly fine. I replace the sensor and wet the car down again. No good it doesn’t work again. Homelink stopped working as well. From what o can tell they share the same power source. I removed bumper and took half the wiring out of wheel well to see if can find and rub spots. Etc. Does anyone have a schematic for this or know if there is a splice in the circuit. I am losing my voltage to connectors and I am guessing it’s corroded connection because when it gets wet and it doesn’t pop the fuse. I luckily haven’t had to work on this car too much yet but if any one has seen something similar or has input it would be appreciated. I work in the trucking world so I don’t have access to schematics nor use them frequently any help would be great thank you