V6 3.0L 30V AVK Engine harness wiring diagram/ecu pin out

[opinaca]

Hi guys,
please I need the complete pin out of the engine wiring harness to ECU and the other modules & connectors to the engine bay fusebox....
Because a small fire in my engine bay melted some wires to the point they are fused together.

Engine cranks but no firing.

So I got to cut and splice them.

I want to splice my harness for the injectors and ignition coils on the left side of the engine (cylinders 4-5-6).

Please thanks.

[pablolizarraga]

Yikes! How did the fire start?

IMG_9569.JPGIMG_9570.JPG


Sent from my iPhone using Audizine

[opinaca]

Yikes! How did the fire start?

Sent from my iPhone using Audizine

A vacuum leak occured at the brake booster, making the engine exhaust manifold becoming too hot because engine was struggling and some plactic bracket & rubber caught up on fire melting some of the wiring.

Thanks for the pics.

[opinaca]

This is the drama
AUDI-A4-Flambé_ (2).jpgAUDI-A4-Flambé_ (1).jpgAUDI-A4-Flambé_bracket-8E0971845D.jpgAUDI-A4-Flambé_réservoir_2.jpg

[pablolizarraga]

Yup. Ive had the brake booster barb that connects at the firewall just snap off. Glad you no one got hurt. Good luck putting it back together.


Sent from my iPhone using Audizine

[opinaca]

So far so good....rewired the ignition harness and brake vac pump, on the left side of my V6....
The injection looked OK.
Still have to replug 2 Oxygen sensors, 2 camshaft sensors plus the crankshaft position sender.
And waiting for a used coolant reservoir.