Reduced Price to $1200 + shipping
As the title states, I have a full set of forged Interad DTM-10 wheels for sale that I had custom built for my B6 (I have widened rear fenders).
Wheels specs:
5x112, 57.1.. Center Bore
Fronts: 19x9 ET35 standard profile
Rear: 19x10 ET35 deep concave
These began as tinted/brushed centers with polished lips, but I had them professionally refinished by Dave at Renewed Finishes (http://renewedfinishes.com/). Refinishing included:
-Strip, blast, prep and coat all 4 wheels
-Brushed centers, lips, and barrels
-Glossy clear center caps with custom finishing in the engraved areas (see photos)
-Satin black hardware (inside the barrels, shown in photos)
The wheels are in excellent condition, have no bends, and have never been curbed or repaired for curbing. I was going to keep these forever but I have have decided to let them go to make room for some new projects.
Note: You can use staggered wheels with Quattro as long as the rolling diameter of the four tires is +/- 3% give or take. I ran these on my car for around 4 years with zero issues (tires were 235/35/19 and 265/30/19).
There are a few very minor imperfections in the clear coat as shown in the pics. Wheels no longer have tires on them and are boxed up and ready to ship.
I do not know how much they weight but they are not nearly as light as the BC Forged Wheels in the same size/spec that I replaced them with. So probably around 24-25lbs for the fronts and slightly more for the rear since they are wider.
I purchased these new for $4,400 plus shipping in 2011.
-Asking price is $1,200 plus shipping and paypal fee.
-Shipping to the lower 48 will likely cost about $50-60 per wheel/box.
The price is semi-firm with a little wiggle room. Low ball offers will be ignored.
Pics posted below. For more pics, please visit the imgur link: https://imgur.com/FVZOZHm More than happy to take additional photos upon request.
Thanks for looking!
[IMG]

[IMG]

[IMG]

[IMG]

[IMG]

[IMG]

[IMG]

[IMG]

[IMG]

[IMG]

[IMG]

[IMG]

Bookmarks