034Motorsport B9 Q5/SQ5 Parts, Tuning, and Upcoming Product Thread!

[Bezlar]

What are we seeing? Pictures don’t show for me.


Sent from my iPhone using Tapatalk

[Hostile]

While we feel that every topic covered in our weekly live streams is interesting and worth watching, we want to specifically turn your attention to a few questions around the topic of our upcoming B9 3.0T tuning, and our B9 tuning as a whole.

Check out our B9 3.0T Tuning Deep Dive, and let us know your thoughts on what we covered here! What other topics should we do a deeper dive on?

Well now I just want a hamburger…

So what about Dynamic+ Lowering springs for the non-air B9 SQ5?

[Hostile]

Not only is this a sneak peak of the upcoming 034 B9 SQ5 X34 intake and air scoop, we need your opinion!

Out of the two options here, where do you think the logo is best placed? Let us know below!

PS, there's another product in these photos that will be available at the end of the month! Can you spot it?

-Nick@034

Pics aren’t working.

[034Motorsport]

Seems depending on the platform/ browser, some were not able to see the pictures. These should work for everyone.

Sorry about that!

[Hostile]

I prefer the logo on top.

So about those Dynamic+ Lowering springs for the non-air B9 SQ5...

[034Motorsport]

I prefer the logo on top.

So about those Dynamic+ Lowering springs for the non-air B9 SQ5...

If you're local, we'd love for you to come in so we can take some measurements!

-Nick@034

[Hostile]

Umm, I'm "continent-ally" local depending on your point of view.

[Mops@Nemesis]

On top for sure, and towards the top where there is more dead space.

Let's get mine headed to Audi 😁

[Benign.5]

I really like the clean look on the front edge so you can see more of the pretty carbon up top.

[034Motorsport]

Umm, I'm "continent-ally" local depending on your point of view.

It's a great time of year to do a cross-country road trip!

I promise, we are working on getting a set of springs for the non-air B9 SQ5 folks. We should hopefully have an offering near the latter half of this year!

-Nick@034

[034Motorsport]

For all of our B9 folks eagerly awaiting tuning or have an interest in tuning their car, please fill out our Dynamic+ interest form! We'll use this form to reach out when files are available, as well as to gauge interest in some files we're thinking of providing!

Please only respond if you own a B9 Audi, Thank you!

https://forms.gle/Njid58s8xudFxQuVA

-Nick@034

[bmoreS4]

For all of our B9 folks eagerly awaiting tuning or have an interest in tuning their car, please fill out our Dynamic+ interest form! We'll use this form to reach out when files are available, as well as to gauge interest in some files we're thinking of providing!

Please only respond if you own a B9 Audi, Thank you!

https://forms.gle/Njid58s8xudFxQuVA

-Nick@034

Done!

[Hostile]

It's a great time of year to do a cross-country road trip!

I promise, we are working on getting a set of springs for the non-air B9 SQ5 folks. We should hopefully have an offering near the latter half of this year!

-Nick@034

YES! Thank you!

For all of our B9 folks eagerly awaiting tuning or have an interest in tuning their car, please fill out our Dynamic+ interest form! We'll use this form to reach out when files are available, as well as to gauge interest in some files we're thinking of providing!

Please only respond if you own a B9 Audi, Thank you!

https://forms.gle/Njid58s8xudFxQuVA

-Nick@034

and done!

[bmoreS4]

Soooooo, about that tune?

[Benign.5]

Done! Glad to see B9.5 was part of the survey!

[Sturn992]

SQ5 offset is inward further. No spacer could be used (nor would that be safe).

If there was enough demand for 10 sets, we could justify making SQ5 specific front rotors.

I've been thinking that we create a kit that expands SQ5 front calipers out to utilize RS5 sized rotors, and figured that'd be a bit more in demand for these large cars than a simple OE-sized replacement. OE Size is good on S4/S5, but these SQ5s are large fellows and could use more leverage.

What are your guys' thoughts? You've got an inside man for these things, let me know if you're interested!

-Nick@034

This is the way!

[Pintojohny]

Any chance that the reso delete and xpipe part will be released before October this year??

[DiscoDan]

Any chance that the reso delete and xpipe part will be released before October this year??

Curious in this as well. ECS has one out and I purchased so curious to see what 034 does.

[sandman00]

We need them rotors


Sent from my iPhone using Audizine Forum

[Pintojohny]

Yes and that one is out of stock until end of this October:(
So I’m hoping to get my hands on 034 version and also the dynamic+ lowering springs before fall, fingers crossed!!!

[F10TT]

Huge opportunity for you guys to come in and supplement ECS on this one. Their X-Pipes are now on a 5 month backorder.

[bmoreS4]

Not only is this a sneak peak of the upcoming 034 B9 SQ5 X34 intake and air scoop, we need your opinion!

Out of the two options here, where do you think the logo is best placed? Let us know below!

PS, there's another product in these photos that will be available at the end of the month! Can you spot it?

-Nick@034

You got 6 days

[034Motorsport]

Available Now: 034Motorsport Front Strut Brace, B9 Q5/SQ5, Billet Aluminum

The factory Audi Q5/SQ5 strut brace is made of thin stamped aluminum, allowing for lateral deflection of the strut towers and chassis flex under hard cornering. This deflection can be observed as imprecise steering input and a vague, disconnected feeling from the front end.

The 034Motorsport Strut Brace replaces the flimsy individual factory braces to improve the B9/B9.5 Q5 & SQ5's steering feel and handling performance. This robust chassis reinforcement is machined from T6-6061 billet aluminum, and engineered to be a comprehensive upgrade by limiting lateral strut tower deflection and maintaining proper suspension geometry under heavy cornering. The incorporated center brace ties together both left and right strut towers to provide precise, consistent feedback from the front end and ensures that you enjoy a more connected and precise driving experience.

This strut brace was thoroughly tested by 034Motorsport on an in-house B9 Audi SQ5 Development Vehicle before release. Installation is very simple, can be performed in minutes, and is completely reversible.

FEATURES:

• Engineered to Enhance Handling Dynamics and Performance
• Improves Steering Feel, Consistency, and Precision
• Better Triangulation than Factory Brace
• Bolt-On Upgrade for Factory Front Strut Braces - Easy, Straightforward Installation!
• T6-6061 Billet Aluminum Construction with Clear Anodized Finish

Check it out HERE!

[034Motorsport]

Available Now: Billet Aluminum Rear Main Seal, 2.0T TSI

034Motorsport’s Billet Aluminum Rear Main Seal is designed to replace the failure-prone stamped steel factory Rear Main Seal on your 2.0T Audi Q5. This Billet Rear Main Seal is CNC machined from 6061-T6 Aluminum and features an OEM Viton Elring seal with an integral tension spring to ensure a tight seal to the crankshaft.

The OEM rear main seal utilizes a poorly designed PTFE “sealing lip” which over time leads to an oil leak between your engine and transmission. The failure of a rear main seal can also cause crankcase pressure issues and possibly even misfires.

The 034Motorsport Billet Aluminum Rear Main Seal has been tested and proven to last under high heat and intense abuse and is an excellent upgrade for replacing your leaking rear main seal. It is also an outstanding preventative maintenance modification that can save you from future headaches of oil leaks, stained driveways, and reduced performance that a leaky OEM rear main seal brings with it.

FEATURES:

• CNC Machined from Billet 6061-T6 Aluminum
• Gloss Black Anodizing
• OEM Elring FPM flurorelastomer Viton Seal With Integral Tension Spring
• New Hardware (Grade 8.8)
• Direct replacement to OEM Part Numbers 06K-103-171G

Check it out HERE

[Hostile]

Don't forget to update the links in the OP!

[034Motorsport]

Don't forget to update the links in the OP!

Thanks for the heads up! We've edited the original post to include both our new Billet Aluminum Strut Brace & Billet Rear Main Seals!

Looking forward to seeing your car get delivered soon! (Lowering Springs for Non-Air Suspension SQ5's is currently in development!)

-Sean@034

[Hostile]

Can't wait!

Oh, you also have the Street Density Mount Upgrade listed in the OP as "coming soon". Is that being redesigned? Another part that's sitting in my wishlist!
https://store.034motorsport.com/dens...s5-q5-sq5.html

[034Motorsport]

Can't wait!

Oh, you also have the Street Density Mount Upgrade listed in the OP as "coming soon". Is that being redesigned? Another part that's sitting in my wishlist!
https://store.034motorsport.com/dens...s5-q5-sq5.html

It has since been confirmed from making this post as fitting the B9 SQ5. After driving our own car with this upgrade, it helps tighten upshifts with the slightest bit of NVH. Stellar upgrade!

OP updated!

-Sean@034

[034Motorsport]

Tune into our weekly live chat, tomorrow at 11am PDT/2pm EDT for a special announcement regarding 3.0T Tuning!

Watch it on Facebook Live, our YouTube channel, or our Instagram!

You don't want to miss this one!


-Sean@034

[034Motorsport]

Our Live Chat is happening in a little under an hour! 11AM PDT!

Tune in on Instagram, Facebook, or Youtube!

-Sean@034

[034Motorsport]

B9 3.0T owners, Substantive Performance is on the horizon. Get ready.

https://store.034motorsport.com/

[bmoreS4]

Great news, now lets see that SQ5 intake!

[Hostile]

ETA on intake and x pipe?
Also where is the CF engine cover from?

How about a please or thank you?

https://store.034motorsport.com/carb...t-engines.html

[034Motorsport]

Great news, now lets see that SQ5 intake!

ETA on intake and x pipe?
Also where is the CF engine cover from?

Intake is currently in testing and should be released this Summer! It sounds great both inside and outside the car! X-Pipe is still in development!

Here is the link to our B9 3.0T Engine Covers

-Sean@034

[034Motorsport]

Just a reminder, for all of our B9 folks eagerly awaiting tuning or have an interest in tuning their car, please fill out our Dynamic+ interest form! We'll use this form to reach out when files are available, as well as to gauge interest in some files we're thinking of providing!

Please only respond if you own a B9 Audi, Thank you!

https://forms.gle/Njid58s8xudFxQuVA

-Sean@034

[jattsta]

Any of these in the works for Q5 B9 2L?
- 100/200cell downpipe (can get this cut and welded but prefer a bolt on option)
- Front mount intercooler (Will SQ5 options fit)
- Turbo upgrades

[034Motorsport]

Great news, now lets see that SQ5 intake!

Any of these in the works for Q5 B9 2L?
- 100/200cell downpipe (can get this cut and welded but prefer a bolt on option)
- Front mount intercooler (Will SQ5 options fit)
- Turbo upgrades

Unfortunately, we do not have a downpipe or intercooler currently in the works. If there is enough interest, it is something we can definitely look into! If the turbo is the same as the A4, there is a strong possibility of seeing a hybrid in the future for the Q5.

SQ5 intake will be here soon enough!

-Sean@034

[bmoreS4]

Five more days



Sent from my iPad using Tapatalk Pro

[cmoore86]

Received and installed today. Thanks @034motorsport for getting these going! Ready for RSB and end links whenever you are...

[Bezlar]

Received and installed today. Thanks @034motorsport for getting these going! Ready for RSB and end links whenever you are...

So? Thoughts on how it feels.


Sent from my iPhone using Tapatalk